VXE4
Features
Block Diagram
Description
VT-804
Applications
6.0 x 3.5mm Crystal
Standard Crystal Datasheet
Page1
Notes:
1. Referenced to the Frequency at 25 °C.
2. Frequency measured at 25 °C ± 3 °C.
Helping Customers Innovate, Improve & Grow
Product is compliant to RoHS directive and fully compatible with lead free assembly.
Table 1. Electrical Performance
Parameter Symbol Min. Typ Max Units
Nominal Frequency FNOM 8.000 100.000 MHz
Mode Fundamental or 3rd Overtone
Operating Temperature Range TOP 0/70, -10/70, -20/70, -40/85 °C
Stability Over TOP
1FSTAB ±10 ±100 ppm
Frequency Tolerance2FTOL ±10 ppm
Load Capacitance CL6 32 pF
Shunt Capacitance Co5 pF
Drive Level 10 100 uW
Aging / 1st year (at 25 °C) FAGE ±5 ppm
Insulation Resistance 500 MOhm
Storage Temperature TSTO -40 90 °C
Equivalent Series Resistance
Crystal Frequency
8.000MHz-10.000MHz
10.001MHz-14.000MHz
14.001MHz-20.000MHz
20.001MHz-50.000MHz
35.000MHz-48.000MHz
48.001MHz-100.000MHz
ESR
60
50
40
30
100
80
Ohm
Package Drawing
Page2
Tape & Reel
Table 7. Tape and Reel Dimensions (mm)
Tape Reel
A B C D E F G H J K L M A B C D E W T
6.4 3.9 12.0 5.5 1.75 8.0 4.0 2.0 1.5 1.55 0.3 1.4 180 180 21.0 13.0 2.0 12.4 2.0
Reliability & IR Compliance
Table 2: Refl ow Profi le
Parameter Symbol Value
PreHeat Time
Ts-min
Ts-max
tS60 sec Min, 260 sec Max
150°C
200°C
Ramp Up RUP 3 °C/sec Max
Time Above 217 °C tL60 sec Min, 150 sec Max
Time To Peak Temperature TAMB-P 480 sec Max
Time at 260 °C tP30 sec Max
Ramp Down RDN 6 °C/sec Max
Pads are Au over Ni and compatible with either SnPb or Pb free attachment.
MSL: 1
Page3
Revision History
Revision Date Approved Description
August 29, 2016 RC Initial datasheet for factory approval and release to customer.
August 10, 2018 FB Update logo and contact information, add “SNPBDIP” ordering option
Ordering Information
VXE4 - XXX - XX- xxMxxxxxxx
Frequency in MHz
Temp Stability
C: 10ppm
D: 15ppm
E: 20ppm
F: 25ppm
G: 30ppm
H: 35ppm
I: 40ppm
J: 45ppm
K: 50ppm
S: 100ppm
Product
6.0 x 3.5mm, Crystal
Load Capacitance
0: Series Resonance
06-32pF
Mode
1: Fundamental
3: 3rd Overtone
Operating Temperature
E: -40 to 85 °C
J: -20 to 70 °C
W: -10 to 70 °C
T: 0 to 70 °C
*Note: not all combination of options are available.
Other specifi cations may be available upon request.
10ppm stability not available for -40 to 85°C
* Add _SNPBDIP for tin lead solder dip
Example: VXE4-1KE-18-26M0000000_SNPBDIP
