VEP15US12 - XP POWER - Product.Network

836 Watts

•Efficiency Efficiency Level V (24 W Level IV)

•CEC2008 & EISA 2007 Compliant

•IT & Medical Approvals

•Interchangeable Input Connectors

•Output Voltages from 5 V to 24 V Available

•Class II Construction

•White Case Version Available 824 W

VEP Series

Input

Input Voltage • 8 & 15W: 80-264 VAC

24 W: 80-264 VAC, derate output power

25% <90 VAC

36 W: 90-264 VAC

Input Frequency • 47-63 Hz

Input Current • 8 W: 0.3 A max at 90 VAC

15 W: 0.5 A max at 90 VAC

24 W: 0.6 A max at 90 VAC

36 W: 0.9 A max at 90 VAC

Inrush Current • 70 A max at 230 VAC, cold start at 25 °C

Power Factor • EN61000-3-2, class A

No Load Input Power • <0.3 W

Output

Output Voltage • See tables

Initial Set Accuracy • ±5% at 50% load

Minimum Load • No minimum load required

Start Up Delay • 2 s typical

Start Up Rise Time • 8 & 15 W: 100 ms typical,

24 & 36 W: 50 ms typical

Hold Up Time • 5 ms typical at full load and 115 VAC

Line Regulation • ±0.5% max

Load Regulation • ±5% max

Transient Response • 4% max. deviation, recovery to <1%

within 500 µs for a 50% step load change

at 0.2 A/µs

Ripple & Noise • See tables

Overvoltage Protection • See tables

Overload Protection • 120-280%

Short Circuit Protection • Trip and restart (hiccup mode)

Temperature • 0.2 %/˚C

Coefficient

General

Efficiency • See tables

Energy Efficiency • Level V

Level IV (24 W versions)

Isolation • 8 - 24 W: 4000 VAC Input to Output,

36 W: 3000 VAC Input to Output

Switching Frequency • 8 & 15 W: 132 kHz typical,

24 & 36 W: 65 kHz typical

MTBF • 8 - 24 W: 250 kHrs, 36 W: 200 kHrs

to MIL-HDBK-217F at 25°C, GB

Environmental

Operating Temperature • 0 ˚C to +40 ˚C

Cooling • Natural convection

Operating Humidity • 5-95% RH, non-condensing

Storage Temperature • -20 ˚C to +60 ˚C

Shock • Able to survive 1 m drop onto concrete on

each of 6 axes

Vibration • 10-300 Hz, 1 g 15 mins/sweep. 30 mins

for each of 3 axes

EMC & Safety

Emissions • EN55022, class B conducted & radiated

Harmonic Currents • EN61000-3-2, class A

Voltage Flicker • EN61000-3-3

ESD Immunity • EN61000-4-2, ±4 kV contact, ±8 kV air,

Perf Criteria A

Radiated Immunity • EN61000-4-3, 3 V/m, Perf Criteria A

EFT/Burst • EN61000-4-4, level 2, Perf Criteria A

Surge • EN61000-4-5, installation class 3,

Perf Criteria A

Conducted Immunity • EN61000-4-6, 3 V, Perf Criteria A

Magnetic Field • EN61000-4-8, 1 A/m, Perf Criteria A

Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms,

100% 5000 ms, Perf Criteria A, B, B

Safety Approvals • 8 & 15 W: EN60950-1, cUL60950-1,

IEC60950-1, EN60601-1, cUL60601-1,

IEC60601-1;

24 W: EN60950-1, cCSAus60950-1,

IEC60950-1, CSA60950-01-03,

cCSAus60601-1, IEC60601-1, CSA C22.2

No601.1,

36 W: IEC60950-1, EN60950-1, UL60950-1

xppower.com

ACDC

Specification

VEP08/15

ACDC

Notes

1. Measured at end of DC output lead using 20 MHz bandwidth and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals.

2. VEP08 models: Other voltages between 3.0 V and 18.0 V are available on request, consult sales for details.

VEP15 models: Other voltages between 3.0 V and 24.0 V are available on request, consult sales for details.

3. A suffix denoting the type of mains plug required must be added to the part number. See below.

4. Efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%.

5. For white case version add suffix -W. MOQ applies, contact sales for details.

6. VEP08 models: Typical trip point, VEP15 models: Maximum trip point.

Mechanical Details

Notes

1. All dimensions in inches (mm). Tolerance is ±0.04 (±1) maximum, except output cable length.

2. Weight: VEP08 - 0.18 lbs (80 g) approx., VEP15 - 0.26 lbs (120 g) approx.

3. Case material is PC Class 94 V-0

4. Output Lead: UL2468 18-24 AWG

5. Mains plugs can be ordered separately. Part numbers are: VEP PLUG UK, VEP PLUG EU, VEP PLUG CN^, VEP PLUG US or VEP PLUG AU^

VEP08: 1.06 (26.8)

VEP15: 1.20 (30.5)

VEP08: 1.67 (42.4)

VEP15: 1.81 (46.0)

VEP08: 2.83 (72.0)

VEP15: 2.95 (75.0)

Add suffix ‘-UK’

Add suffix ‘-EU’

China

Add suffix ‘-CN’

USA

Add suffix ‘-US’

Australia

Add suffix ‘-AU’

70.87 ± 10%

(1800 ±10%)

Output Plug: ø 5.5 x ø 2.5 x 11.0 mm Inner Positive

Models and Ratings

Output Power Output Voltage(2) Output Current Ripple & Noise(1) Overvoltage Trip(6) Efficiency(4) Model Number(3,5)

8.0 W 5.0 V 1.60 A 150 mV 10.0 V 73% VEP08US05

8.0 W 9.0 V 0.88 A 200 mV 18.0 V 77% VEP08US09

8.0 W 12.0 V 0.66 A 200 mV 20.0 V 77% VEP08US12

8.0 W 15.0 V 0.53 A 200 mV 25.0 V 78% VEP08US15

10.0 W 5.0 V 2.00 A 50 mV 9.0 V 75% VEP15US05

12.6 W 9.0 V 1.40 A 100 mV 15.0 V 80% VEP15US09

15.0 W 12.0 V 1.25 A 100 mV 20.0 V 82% VEP15US12

15.0 W 15.0 V 0.90 A 150 mV 25.0 V 82% VEP15US15

15.0 W 24.0 V 0.63 A 200 mV 35.0 V 83% VEP15US24

VEP24

Models and Ratings

ACDC

Output Power Output Voltage(3) Output Current Ripple & Noise(1) Overvoltage Trip(6) Efficiency(4) Model Number(2,5)

12.5 W 5.0 V 2.5 A 100 mV 10.0 V 73% VEP24US05

19.8 W 9.0 V 2.2 A 100 mV 18.0 V 79% VEP24US09

24.0 W 12.0 V 2.0 A 100 mV 20.0 V 80% VEP24US12

24.0 W 15.0 V 1.6 A 100 mV 25.0 V 80% VEP24US15

24.0 W 24.0 V 1.0 A 100 mV 35.0 V 82% VEP24US24

Notes

1. Measured at end of DC output lead using 20 MHz bandwidth and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals.

2. A suffix denoting the type of mains plug required must be added to the part number. See below.

3. Other voltages between 3.0 V and 24.0 V are available on request, consult sales for details.

4. Efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%.

5. For white case version add suffix -W. MOQ applies, contact sales for details.

6. Typical trip point.

Mechanical Details

Notes

1. All dimensions in inches (mm). Tolerance is ±0.04 (±1) maximum, except output cable length

2. Weight: 0.35 lbs (160 g) Approx

3. Case material is PC Class 94 V-0

4. Output Lead: UL2468 18-24 AWG

5. Mains plugs can be ordered separately. Part numbers are: VEP PLUG UK, VEP PLUG EU, VEP PLUG CN, VEP PLUG US or VEP PLUG AU

1.14

(29.0)

1.89

(47.9)

3.46

(88.0)

Add suffix ‘-UK’

Add suffix ‘-EU’

China

Add suffix ‘-CN’

USA

Add suffix ‘-US’

Australia

Add suffix ‘-AU’

59.0 ± 10%

(1500 ±10%)

Output Plug: ø 5.5 x ø 2.5 x 11.0 mm Inner Positive

ACDC

14-Aug-14

VEP36

Models and Ratings

Output Power Output Voltage(3) Output Current Ripple & Noise(1) Overvoltage Trip(4) Efficiency(3) Model Number(2)

27 W 9.0 V 3.0 A 200 mV 25.0 V 85% VEP36US09

36 W 12.0 V 3.0 A 200 mV 28.0 V 85% VEP36US12

36 W 15.0 V 2.4 A 200 mV 28.0 V 86% VEP36US15

36 W 24.0 V 1.5 A 200 mV 42.0 V 87% VEP36US24

Notes

1. Measured at end of DC output lead using 20 MHz bandwidth and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals.

2. A suffix denoting the type of mains plug required must be added to the part number. See below.

3. Efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%.

4. Typical trip point.

Mechanical Details

Notes

1. All dimensions in inches (mm). Tolerance is ±0.04 (±1) maximum, except output cable length

2. Weight: 0.57 lbs (260 g) Approx

3. Case material is PC Class 94 V-0

4. Output Lead: UL2468 18-24 AWG

5. Mains plugs can be ordered separately. Part numbers are: VEP PLUG UK, VEP PLUG EU, VEP PLUG CN, VEP PLUG US or VEP PLUG AU

Add suffix ‘-UK’

Add suffix ‘-EU’

China

Add suffix ‘-CN’

USA

Add suffix ‘-US’

Australia

Add suffix ‘-AU’

1.42±0.04

(36.0±1)

4.02±0.04 (102.0±1)

3.90±0.04 (99.0±1)

2.09±0.04

(53.0±1)

0.31±0.04

(8.0±1)

35.43-39.37 (900-1000)

Output Plug: ø 5.5 x ø 2.5 x 11.0 mm Inner Positive