North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662
2
Special Features
Electrical Specs
10 Watts
AEE01,02
•10 W, Single output
•2:1 Input range
•1.0" x 2.0" x 0.33 case
•Replaces AA10B
•Industry standard package
•Low Profile
•Low Cost
Operating base temperature range:
-25°C to +95°C
Storage temperature: -40°C to +105°C
MTBF: 3 Million Hours (Belcore TR332)
UL UL1950 Recognition
CSA CSA22.2-950 Recognition
TUV EN60950 Recognition
Input
Input range 18 to 36 VDC
36 to 72 VDC
Efficiency 79% typical (5V)
Output
Voltage tolerance ±1.0% (±2.0% for 3.3V)
Overall regulation ±1% max
Noise/ripple 1% (mV P-P)
Transient response 200 usec typical (50% step load
change to within 5%Vo)
Temperature Regulation ±0.02 %Vo/°C
Switching frequency 330kHz
Isolation
I/O isolation 500 VDC
Isolation Resistance 300 Mohms
Total Power: 10 Watts
Input Voltages: 48V, 24V
No. of Outputs: Single
Environmental
Safety
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
3
Ordering Information
www.astec.com Rev:July 03
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Input Output Efficiency Model Number
Voltage Voltage
18-36 V 3.3 @ 2.5 A 76% AEE02F24
18-36 V 5.0 @ 2.0 A 78% AEE02A24
18-36 V 8.0 @ 1.25A 78% AEE01L24
18-36 V 12.0 @ 0.84 A 82% AEE00B24
18-36 V 15.0 @ 0.67 A 82% AEE00C24
36-72 V 3.3 @ 2.5 A 77% AEE02F48
36-72 V 5.0 @ 2.0 A 79% AEE02A48
36-72 V 8.0 @ 1.25 A 77% AEE01L48
36-72 V 12.0 @ 0.84 A 84% AEE00B48
36-72 V 15.0 @ 0.67 A 86% AEE00C48
Notes:
1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor
is recommended to be placed from +V out to comm.
2. All specifications are typical at nominal line, full load,
and 25°C unless otherwise noted.
3. All specifications subject to change without notice.
4. Mechanical drawings are for reference only.
Mechanical Dimensions and Pin Assignments
