ADAM-5013 ADAM-5017 ADAM-5017H ADAM-5013 Channels 3 Effective Resolution 16-bit lnput Type PT100 or Ni RTD RTD Types and Temperature Ranges IEC RTD 100 ohms Pt -100 C to +100 C a=0.00385 Pt 0 C to +100 C a=0.00385 Pt 0 C to +200 C a=0.00385 Pt 0 C to +600 C a=0.00385 JIS RTD 100 ohms Pt -100 C to +100 C a=0.00392 Pt 0 C to +100 C a=0.00392 Pt 0 C to +200 C a=0.00392 Pt 0 C to +600 C a=0.00392 Ni RTD Ni -80 C to +100 C Ni 0 C to +100 C Isolation Voltage 3000 VDC Sampling Rate 10 samples/sec. (total) Input Impedance 2 M Bandwidth 13.1 Hz @ 50 Hz, 15.72 Hz @ 60 Hz Input Connections 2, 3 or 4 wire Accuracy 0.1% or better Zero Drift 0.015 C/ C Span Drift 0.01 C/ C CMR @ 50/60 Hz 150 dB NMR @ 50/60 Hz 100 dB Power Consumption 0.85 W (typical); 1.1 W (max.) 8-channel High-Speed Analog Input Module ADAM-5017H Specifications Channels Effective Resolution lnput Type lnput Range Specifications 8 differential 16-bit mV, V, mA 150 mV, 500 mV, 1 V, 5 V, 10 V; 20 mA Isolation Voltage 3000 VDC Fault and Overvoltage Withstands overvoltage up to 35 V Protection Sampling Rate 10 samples/sec. (total) Input Impedance 2 M Bandwidth 13.1 Hz @ 50 Hz, 15.72 Hz @ 60 Hz Accuracy 0.1% or better Zero Drift 1.5 mV/ C Span Drift 25 PPM/ C CMR @ 50/60 Hz 92 dB min. Power Consumption 1 W (typical); 1.25 W (max.) Analog Signal Range 15 V max. Note: The voltage difference between any two pins must not exceed 15 V Ordering Information ADAM-5017 Ordering Information ADAM-5013-A1 8-channel Analog Input Module ADAM-5017 Specifications 3-channel RTD Input Module 3-channel RTD Input Module 8-channel Analog Input Module - mV, V, mA Channels Effective Resolution Input Type Input Range 8 differential 12-bit plus sign bit mV, V, mA 250 mV, 500 mV, 1 V, 5 V, 10 V, 0 ~ +500 mV, 0 ~ +1 V, 0 ~ +5 V, 0 ~ +10 V, 0 ~ 20 mA, 4 ~ 20 mA Isolation Voltage 3000 VDC Sampling Rate Depends on base unit ADAM-5000/485 & 5000E: 100 samples/sec ADAM-5510: 8000 samples/sec max.: one ADAM-5017H installed ADAM-5510KW: Up to 100 samples/sec ADAM-5511: Up to 100 samples/sec ADAM-5000/TCP: 1000 samples/sec max.: depending on the performance of client server or controller Input Impedance 20 M (voltage inputs) 125 (current inputs) Bandwidth 1 kHz Signal Input Bandwidth 1 kHz for both voltage and current inputs Accuracy 0.1% or better CMR @ 50/60 Hz 92 dB min Power Consumption 1.75 W (typical); 2.2 W (max) Distinct Range Settings Allowed on Each Channel Note: The voltage difference between any two pins must not exceed 15 V Ordering Information ADAM-5017H 8-channel High-Speed Analog Input Module - mV, V, mA Distributed DA&C Systems All product specifications are subject to change without notice Last updated : January 2005