Product # Keyword Login | Register Home + Products + Modules + 10-pin to 20-pin JTAG Adapter i What's New I~ Browse by Series EI Browse by Feature E}- Kits EI Modules fo Stepper Module i ACIM Module 1. Brushless Dt Motor Module i. Brushed DC Motor Module i... Serial to Ethernet Module 1. Intelligent Display Module with Poe i... Intelligent Display Module with Ethernet i. Intelligent Display Module 3.5" Landscape !.. 10-pin to 20-pin JTAG Adapter , Stellaris Ware Software i... Product Selector Guide Data Sheets White Papers Product Selector Guide Try Before You Buy 3rd Party Resources App Notes Errata Software Updates Forums Buy Now Register Product | Cortex Intelligent Processors by ARPT 10-pin to 20-pin JTAG Adapter Module The convenient MBL-ADA? is a 10-pin to 20-pin JTAG Adapter Module with flexible cable is designed to convert between the new ARM mini-JTAG connector (10-pin) and the standard ARM JTAG connector (20-pin). With the included flexible 10-pin cable, it can easily connect to small modules using the 10-pin mini-JTAG connector in nearly any orientation. Module Contents The MOL-ADA? ships as a circuit board and flexible 10-pin cable only. Ordering Part Numbers and Information Ordering Information MDL-ADA?2 Module Usage 10-pin to 20-pin JTAG Adapter Module The 10-pin to 20-pin JTAG Adapter Module is used in conjunction with any ARM Cortex-M3 JTAG emulator, such as any Luminary Micro Stellaris evaluation kit, a Keil ULINK, or LAR JLINK, The images below show examples of the use of the 10-pin to 20- pin JTAG Adapter Module. 10-pin to 20-pin JTAG Adapter used with a Stellaris LM35011 evaluation kit to debug a Stellaris Serial-to-Ethernet module (MDL-52E) Copyright 6 2006-2000 Luminary Micro, Inc. All rights reserved. Legal information oa boo @ i) The module featured on this page is included in the following open-tooled Reference Design Kits: RDOK-S2ZE, ROK-IDM, ROK-IDM-L35, RDK-BLDC, and RDK-BDC. If you have one of those Reference Design Kits, YOu do not need to buy this product. See the Reference Design Kit pages for details. Features The MGL-ADA? ships ready-to-use with the following features: Board with 20-pin standard ARM JTAG header socket and 10-pin ARM mini-JTAG socket Convenient reset button for JTAG reset Flexible cable for 10-pin to 10-pin connectivity in any orientation Home | Products | Support | Sales | About Us | Contact