AA10U AA10U 10 Watts 10 Watts AA10U Series Total Power 10 Watts Input Voltages 12V, 24V, 48V # of Outputs Single, Dual AA10U-024L-033S Technical Manual - Click Here AA10U-048L-033S Technical Manual - Click Here S P E C I A L F E AT U R E S E L E C T R I C A L S P E C I F I C AT I O N S * * * * * Input Unencapsulated Wide 4:1 input range 5 year warranty 1.0" x 2.0" x 0.38" case Meets EN55022A for conducted noise Input range ............................ 9 to 36 VDC; 18 to 75 VDC Input capacitance .................. 48 models 24 models 1.5uF typical 2.7uF typical No load input power .............. 150mW typical Input reflected ripple (P-P) .... 48 Models 24 Models E N V I R O N M E N TA L Efficiency ............................... 82% (typ) Operating ambient temperature range: -40C to +75C (no derating) Output Baseplate: 105C Max. 4mA 10mA see Note 2 Voltage tolerance .................. 1.0% (main); 2.0% (aux) (factory set-point) Line regulation ...................... +0.5% max (main); 0.5% (aux) Storage Temperature: -55C to +125C Humidity: 5% to 95% (non-condensing) Load regulation ..................... 0.5% (10% load to full load (singles)) 1.0% (10% load to full load (duals)) Noise/ripple ........................... 1% p-p (See Note 1) EMI/RFI Shielding: Five-Sided Short circuit protection .......... Continuous Power Cycle MTBF: 361,000 hours (MIL-HDBK-217) Overvoltage protection .......... Zener clamp Transient response .............. 1mS 50% Step load change to within 1% Vout Switching frequency .............. All models 380kHz except 150S & 150D Models 300kHz (typ.) Temperature coefficient ......... 0.02%/C max. SAFETY UL TUV UL 1950 Recognized CAN22.2-950 Recognized EN60950 Certified Isolation I/O isolation ........................... 1500 VDC min Insulation resistance ............ 50 M ohm Insulation capacitance .......... 220pF NOTES: In order to comply with safety regulations, it is recommended that a fuse of the following rating be fitted at the module's input. 141a USA: 1-888-41-ASTEC Fuse ...................................... .024 - 2.25A/250V .............................................. 048 - 1A/250V Europe (UK): +44(0)1384-842211 Asia (HK): 852-2437-9662 ASIA 6F., CDW Building 382-392 Castle Peak Road Tsuen Wan, N.T., Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone:+44(0)1384-842211 Facsimile:+44(0)1384-843355 D C D C O R D E R I N G I N F O R M AT I O N Input Voltage Output 1 Voltage 9-36V 9-36V 9-36V 9-36V 9-36V 9-36V 9-36V 3.3V @ 2.42A 5V @ 2.00A 12V @ 0.830A 15V @ 0.670A 5V @ .750A 12V@ .375A 15V@.300A 18-75V 18-75V 18-75V 18-75V 18-75V 18-75V 18-75V 3.3V @ 2.42A 5V @ 2.00A 12V @ 0.830A 15V @ .670A 5V@.750A 12V @ 0.375A 15V @ 0.300A Output 2 Voltage Maximum Power Model Number -5V @ .750A -12V @ 0.375A -15V @ 0.300A 8W 10W 10W 10W 7.5W 9W 9W AA10U-024L-033S AA10U-024L-050S AA10U-024L-120S AA10U-024L-150S AA10U-024L-050D AA10U-024L-120D AA10U-024L-150D -5V @ 0.750A -12V @ 0.375A -15V @ 0.300A 8W 10W 10W 10W 7.5W 9W 9W AA10U-048L-033S AA10U-048L-050S AA10U-048L-120S AA10U-048L-150S AA10U-048L-050D AA10U-048L-120D AA10U-048L-150D P O W E R Please contact Astec for information on other output voltages, power ranges and configurations. D R AW I N G S PIN ASSIGNMENTS 0.38 (9.65) Single Output 1. 2. 3. 4. 5. 0.40 (1.01) DIA TYP 2.00 (50.80) 0.10 (2.54) 0.60 (15.24) 0.8 (20.32) +Vin -Vin Output 1 No pin COMM Dual Output 1. 2. 3. 4. 5 +Vin. -Vin Output 1 COMM Output 2 AA10U 0.15 (3.81) 3 1 1.00 (25.4) 0.20 (5.08) .80 (20.32) 4 2 0.40 (10.15) 5 BOTTOM VIEW ALL DIMENSIONS ARE IN INCHES (mm) .40 (10.15) 0.10 (2.54) NOTES Note: Pins 0.040 in Dia x 0.15 in min Case material: Anodized aluminum and plastic Weight: 0.60 oz/17 grams 1. 20MHz bandwidth. An external 0.1uf ceramic capacitor is recommended to be placed from +V out to -V out. 2. Meets FCC class A and ETS300-386-1 requirements for conducted noise. Consult factory for filter recommendations to meet FCC class B, VDE or EIC specifications. 3. All specifications are typical at nominal line, full load, and 25C unless otherwise noted. 4. All specifications subject to change without notice. Mechanical drawings are for reference only. 5. Calculated per MIL HDBK 217F, Ground Benign at 25C, full load. www.astec.com 141b