TDN 5-2411WI - TRACO ELECTRONIC AG

www.tracopower.com Page 1 of 3

DC/DC Converter TDN 5WI Series, 5 Watt

Models

• Ultra compact DIP package

13,2  9,1  10,2 mm

• I/O-isolation 1‘600 VDC

• Fully regulated outputs

• Operating temperature range

–40°C to +75°C

• Short circuit protection

• Remote On/Off

• 3-year product warranty

• Designed to meet UL 62368-1

(UL 60950-1)

The TDN 5WI Series redeﬁnes the power density of high performance DC/DC

converters. The cubical package of only 1.23 cm3 encloses a sophisticated cir-

cuit which provides 5 Watt output power. They operate up to 50°C environment

temperature at full load or up to 75°C with a 50% load derating. With 1600 VDC

I/O-isolation voltage, external On/Off, and short current protection they cover a

wide range of application when space is limited. The input of the converters is

designed for a wide voltage range (4:1) and minimum load is not required. The

functional I/O-isolation system is designed to meet IEC/EN 62368-1 with a test

voltage (60 s) of 1600 VDC.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TDN 5-0910WI 3.3 VDC 1000 mA 76 %

TDN 5-0911WI 5.0 VDC 1000 mA 80 %

TDN 5-0919WI 9.0 VDC 555 mA 81 %

TDN 5-0912WI 12 VDC 420 mA 83 %

TDN 5-0913WI 4.5 – 13.2 VDC 15 VDC 333 mA 83 %

TDN 5-0915WI (9 VDC nominal) 24 VDC 210 mA 83 %

TDN 5-0921WI ± 5.0 VDC ±500 mA 80 %

TDN 5-0922WI ±12 VDC ±210 mA 83 %

TDN 5-0923WI ±15 VDC ±168 mA 83 %

TDN 5-2410WI 3.3 VDC 1000 mA 76 %

TDN 5-2411WI 5.0 VDC 1000 mA 80 %

TDN 5-2419WI 9.0 VDC 555 mA 81 %

TDN 5-2412WI 12 VDC 420 mA 83 %

TDN 5-2413WI 9 – 36 VDC 15 VDC 333 mA 83 %

TDN 5-2415WI (24 VDC nominal) 24 VDC 210 mA 83 %

TDN 5-2421WI ± 5.0 VDC ±500 mA 80 %

TDN 5-2422WI ±12 VDC ±210 mA 83 %

TDN 5-2423WI ±15 VDC ±168 mA 84 %

TDN 5-4810WI 3.3 VDC 1000 mA 76 %

TDN 5-4811WI 5.0 VDC 1000 mA 81 %

TDN 5-4819WI 9.0 VDC 555 mA 81 %

TDN 5-4812WI 12 VDC 420 mA 83 %

TDN 5-4813WI 18 – 75 VDC 15 VDC 333 mA 83 %

TDN 5-4815WI (48 VDC nominal) 24 VDC 210 mA 83 %

TDN 5-4821WI ± 5.0 VDC ±500 mA 80 %

TDN 5-4822WI ±12 VDC ±210 mA 83 %

TDN 5-4823WI ±15 VDC ±168 mA 84 %

Models

Also see:

TDN 5WISM, SMD version

www.tracopower.com/products/tdn5wism.pdf

TDN 5WI Series, 5 Watt

www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input current at no load 9 Vin models: 80 mA typ

24 Vin models: 30 mA typ.

48 Vin models: 15 mA typ.

Surge voltage (1 sec. max.) 9 Vin models: 15 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Reflected ripple current 9 Vin models: 40 mAp-p typ.

24 Vin models: 20 mAp-p typ.

48 Vin models: 15 mAp-p typ.

Conducted noise EN 55022 class A or B with external

components, see supporting documents

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±1 kV perf. criteria A

–external input capacitor all models: Nippon chemi-con KY 220µF/100V

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Power frequency magnetic field EN 61000-4-8, 100 A/m, perf. criteria A

Output Specifications

Voltage set accuracy ±1 % max.

Voltage balance (dual output models) 1 % max.

Regulation – Input variation 0.2 % max.

– Load variation 0 – 100 % single output: 1 % max.

dual output: 1 % max. (balanced load)

cross regulation - dual output: 5 % max. (asymmetrical load 25 % / 100 %)

Temperature coefficient ±0.02 %/K typ.

Ripple and noise (20 MHz Bandwidth) 9 Vin models: 50 mVp-p typ.

other models: 75 mVp-p typ.

Start up time – Power ON 10 ms typ. / 20 ms max.

(constant resistive load) – Remote ON 10 ms typ. / 20 ms max.

Transient response (25% load step change) 500 μs typ.

Short circuit protection continuous, automatic recovery

Capacitive load –Single output 3.3 VDC models: 4400 µF max.

5.0 VDC models: 2200 µF max.

9.0 VDC models: 1470 µF max.

12 VDC models: 1220 µF max.

15 VDC models: 1000 µF max.

24 VDC models: 470 µF max.

–Dual output ±5.0 VDC models: 1000 µF max. (each output)

±12 VDC models: 680 µF max. (each output)

+15 VDC models: 440 µF max. (each output)

General Specifications

Temperature ranges – Operating (convection cooling 20LFM, 0,1m/s) –40°C to +75°C

– Case temperature +105°C max.

– Storage temperature –55°C to +125°C

Derating 1.8%/K above 50°C

Humidity (non condensing) 5 – 95 % rel H max.

Isolation voltage – I/O isolation voltage (60 sec.) 1’600 VDC

Isolation capacitance 50 pF max.

TDN 5WI Series, 5 Watt

www.tracopower.com

Page 3 of 3

Rev. May 28, 2018

General Specifications

Isolation resistance (@ 500 VDC) >1 Gohm

Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 2‘280‘000 h

Switching frequency 100 kHz min. Pulse frequency modulation.

Thermal shock & vibration MIL-STD-810F

Remote On/Off –On: open circuit or high impedance

–Off: 2 – 4 mA current applied via 1kOhm resistor

–Off idle current: 2.5 mA max.

Safety standards – Designed to meet (no certification) IEC/EN/UL 62368-1, UL 60950-1

Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Physical Specifications

Casing material non-conducting FR4 (UL 94V-0 rated)

Potting material silicone (UL 94V-0 rated)

Pin material tinned copper

Package weight 2.7 g (0.10 oz)

Soldering temperature 260°C / 6 s max.

Outline Dimensions

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

4On/Off On/Off

5no con. –Vout

6–Vout Common

7+Vout +Vout

Pin-Out

Dimensions in [mm], () = Inch

Tolerances: x.x ±0.5 (±0.02)

Pin pitch tolerances ±0.25 (±0.01)

pin dimension tolerance ±0.1 (±0.004)

4.5 (0.18)

9.9 (0.39)

10.2 (0.40)

0.6 (0.024)

13.2 (0.52)

5.07 (0.2)

9.1 (0.36)

3 x 2.0

(3 x 0.08)

bottom viev

Supporting Documents: www.tracopower.com/overview/tdn5wi