3048836 - PHOENIX CONTACT - Product.Network

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page1/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Four-conductor universal terminal block, nom. voltage: 1000 V, nominal current: 32 A, connection method: Screw

connection, number of connections: 4, cross section: 0.14 mm²-6 mm², AWG:26-10, width: 6.2 mm, color:

blue, mounting type: NS 35/7,5, NS 35/15

Your advantages

These versions can be used as compact potential distributors

Key Commercial Data

Packing unit 1 pc

Minimum order quantity 50 pc

GTIN

GTIN 4046356517577

Weight per Piece (excluding packing) 18.000 g

Custom tariff number 85369010

Country of origin China

Technical data

General

Number of levels 1

Number of connections 4

Potentials 1

Nominal cross section 4 mm²

Color blue

Insulating material PA

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page2/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Technical data

General

Flammability rating according to UL 94 V0

Rated surge voltage 6 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Maximum power dissipation for nominal condition 1.02 W

Maximum load current

37 A (In the case of a 6 mm² conductor cross section, the maximum

load current must not be exceeded by the total current of all connected

conductors)

Nominal current IN32 A

Nominal voltage UN1000 V

Open side panel Yes

Ambient temperature (operation) -60 °C ... 105 °C (max. short-term operating temperature130°C)

Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24h, -60°C to +70°C)

Permissible humidity (storage/transport) 30 % ... 70 %

Ambient temperature (assembly) -5 °C ... 70 °C

Ambient temperature (actuation) -5 °C ... 70 °C

Shock protection test specification IEC 60529:2001-02

Back of the hand protection guaranteed

Finger protection guaranteed

Result of surge voltage test Test passed

Surge voltage test setpoint 9.6 kV

Result of power-frequency withstand voltage test Test passed

Power frequency withstand voltage setpoint 2.2 kV

Result of the test for mechanical stability of terminal points (5 x conductor

connection) Test passed

Result of bending test Test passed

Bending test rotation speed 10 (+/- 2) rpm

Bending test turns 135

Bending test conductor cross section/weight 0.14 mm² / 0.2 kg

4 mm² / 0.9 kg

6 mm² / 1.4 kg

Tensile test result Test passed

Conductor cross section tensile test 0.14 mm²

Tractive force setpoint 10 N

Conductor cross section tensile test 4 mm²

Tractive force setpoint 60 N

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page3/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Technical data

General

Conductor cross section tensile test 6 mm²

Tractive force setpoint 80 N

Result of tight fit on support Test passed

Tight fit on carrier NS 32/NS 35

Result of voltage-drop test Test passed

Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1

Result of temperature-rise test Test passed

Requirement temperature-rise test Increase in temperature ≤ 45 K

Short circuit stability result Test passed

Conductor cross section short circuit testing 4 mm²

Short-time current 0.48 kA

Conductor cross section short circuit testing 6 mm²

Short-time current 0.72 kA

Result of thermal test Test passed

Proof of thermal characteristics (needle flame) effective duration 30 s

Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05

Test spectrum Service life test category 2, bogie-mounted

Test frequency f1 = 5 Hz to f2 = 250 Hz

ASD level 6.12 (m/s2)2/Hz

Acceleration 3.12 g

Test duration per axis 5 h

Test directions X-, Y- and Z-axis

Shock form Half-sine

Acceleration 30g

Shock duration 18 ms

Number of shocks per direction 3

Test directions X-, Y- and Z-axis (pos. and neg.)

Relative insulation material temperature index (Elec., UL 746 B) 130 °C

Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C

Static insulating material application in cold -60 °C

Surface flammability NFPA 130 (ASTM E 162) passed

Specific optical density of smoke NFPA 130 (ASTM E 662) passed

Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg

Smoke gas toxicity NFPA 130 (SMP 800C) passed

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page4/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Technical data

General

Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3

Dimensions

Width 6.2 mm

End cover width 2.2 mm

Length 65.4 mm

Height NS 35/7,5 50 mm

Height NS 35/15 57.5 mm

Connection data

Connection 1 level

Connection method Screw connection

Screw thread M3

Stripping length 9 mm

Tightening torque, min 0.6 Nm

Tightening torque max 0.8 Nm

Connection in acc. with standard IEC60947-7-1

Conductor cross section solid min. 0.14 mm²

Conductor cross section solid max. 6 mm²

Conductor cross section AWG min. 26

Conductor cross section AWG max. 10

Conductor cross section flexible min. 0.14 mm²

Conductor cross section flexible max. 6 mm²

Min. AWG conductor cross section, flexible 26

Max. AWG conductor cross section, flexible 10

Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²

Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²

2 conductors with same cross section, solid min. 0.14 mm²

2 conductors with same cross section, solid max. 1.5 mm²

2 conductors with same cross section, stranded min. 0.14 mm²

2 conductors with same cross section, stranded max. 1.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules,

with plastic sleeve, minimum 0.5 mm²

Two conductors with the same cross section, flexible, with TWIN ferrules,

with plastic sleeve, maximum 1 mm²

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page5/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Technical data

Connection data

Two conductors with the same cross section stranded, with ferrule and

without plastic sleeve, minimum 0.14 mm²

Two conductors with the same cross section stranded, with ferrule and

without plastic sleeve, maximum 1.5 mm²

Internal cylindrical gage A4

Standards and Regulations

Connection in acc. with standard IEC60947-7-1

Flammability rating according to UL 94 V0

Environmental Product Compliance

REACh SVHC Lead 7439-92-1

China RoHS Environmentally Friendly Use Period = 50 years

For details about hazardous substances go to tab “Downloads”, Category

“Manufacturer's declaration”

Drawings

Circuit diagram

Classifications

eCl@ss

eCl@ss 10.0.1 27141120

eCl@ss 11.0 27141120

eCl@ss 4.0 27141100

eCl@ss 4.1 27141100

eCl@ss 5.0 27141100

eCl@ss 5.1 27141100

eCl@ss 6.0 27141100

eCl@ss 7.0 27141120

eCl@ss 8.0 27141120

eCl@ss 9.0 27141120

ETIM

ETIM 4.0 EC000897

ETIM 5.0 EC000897

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page6/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Classifications

ETIM

ETIM 6.0 EC000897

ETIM 7.0 EC000897

UNSPSC

UNSPSC 6.01 30211811

UNSPSC 7.0901 39121410

UNSPSC 11 39121410

UNSPSC 12.01 39121410

UNSPSC 13.2 39121410

UNSPSC 18.0 39121410

UNSPSC 19.0 39121410

UNSPSC 20.0 39121410

UNSPSC 21.0 39121410

Approvals

IECEE CB Scheme / VDE Zeichengenehmigung / EAC

Ex Approvals

IECEx / ATEX / EAC Ex / NEPSI

Approval details

IECEE CB Scheme http://www.iecee.org/ DE1-62014

 

Nominal voltage UN 1000 V

mm²/AWG/kcmil 4

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page7/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Approvals

VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/

VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40040772

 

Nominal voltage UN 1000 V

Nominal current IN 32 A

mm²/AWG/kcmil 0.14-6

EAC RU C-

DE.A*30.B.01742

Accessories

DIN rail

DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733

DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,

passivated with a thick layer, length:2000 mm, color:silver



DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681

DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,

passivated with a thick layer, length:2000 mm, color:silver



DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119

DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white

passivated, length:2000 mm, color:silver



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page8/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122

DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,

white passivated, length:2000 mm, color:silver



DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704

DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,

length:2000 mm, color:silver



DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421

DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,

length:2000 mm, color:silver



DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434

DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,

length:2000 mm, color:silver



DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762

DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,

length:2000 mm, color:copper-colored



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page9/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

End cap-NS 35/ 7,5 CAP-1206560

DIN rail end piece, for DIN rail NS 35/7.5



DIN rail perforated-NS 35/15 PERF 2000MM-1201730

DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,

passivated with a thick layer, length:2000 mm, color:silver



DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714

DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,

passivated with a thick layer, length:2000 mm, color:silver



DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602

DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,

white passivated, length:2000 mm, color:silver



DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135

DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,

white passivated, length:2000 mm, color:silver



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page10/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756

DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,

uncoated, length:2000 mm, color:silver



DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599

DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,

length:2000 mm, color:silver



DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586

DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,

length:2000 mm, color:silver



DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895

DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,

length:2000 mm, color:copper-colored



End cap-NS 35/15 CAP-1206573

DIN rail end piece, for DIN rail NS 35/15



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page11/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798

DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,

galvanized, passivated with a thick layer, length:2000 mm, color:silver



End block

End clamp-CLIPFIX 35-3022218

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray



End clamp-CLIPFIX 35-5-3022276

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for

FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray



End clamp-E/NS 35 N-0800886

End clamp, width: 9.5 mm, color: gray



End cover

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page12/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

End cover-D-UT 4-QUATTRO HV-3048852

End cover, length: 64.4 mm, width: 2.2 mm, height: 42.3 mm, color: gray



Insulating sleeve

Insulating sleeve-MPS-IH WH-0201663

Insulating sleeve, color: white



Insulating sleeve-MPS-IH RD-0201676

Insulating sleeve, color: red



Insulating sleeve-MPS-IH BU-0201689

Insulating sleeve, color: blue



Insulating sleeve-MPS-IH YE-0201692

Insulating sleeve, color: yellow



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page13/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Insulating sleeve-MPS-IH GN-0201702

Insulating sleeve, color: green



Insulating sleeve-MPS-IH GY-0201728

Insulating sleeve, color: gray



Insulating sleeve-MPS-IH BK-0201731

Insulating sleeve, color: black



Jumper

Plug-in bridge-FBS 2-6-3030336

Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page14/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Plug-in bridge-FBS 3-6-3030242

Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: red



Plug-in bridge-FBS 4-6-3030255

Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: red



Plug-in bridge-FBS 5-6-3030349

Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red



Plug-in bridge-FBS 6-6-1008238

Plug-in bridge, One side not fully isolated, pitch: 6.2 mm, width: 35.5 mm, number of positions: 6, color: red



Plug-in bridge-FBS 10-6-3030271

Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page15/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Plug-in bridge-FBS 20-6-3030365

Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: red



Plug-in bridge-FBS 50-6-3032224

Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: red



Plug-in bridge-FBSR 2-6-3033715

Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red



Plug-in bridge-FBSR 3-6-3001594

Plug-in bridge, pitch: 6.2 mm, number of positions: 3, color: red



Plug-in bridge-FBSR 4-6-3001595

Plug-in bridge, pitch: 6.2 mm, number of positions: 4, color: red



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page16/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Plug-in bridge-FBSR 5-6-3001596

Plug-in bridge, pitch: 6.2 mm, number of positions: 5, color: red



Plug-in bridge-FBSR 10-6-3033716

Plug-in bridge, pitch: 6.2 mm, number of positions: 10, color: red



Plug-in bridge-FBS 2-6 BU-3036932

Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue



Plug-in bridge-FBS 3-6 BU-3036945

Plug-in bridge, pitch: 6.2 mm, width: 16.9 mm, number of positions: 3, color: blue



Plug-in bridge-FBS 4-6 BU-3036958

Plug-in bridge, pitch: 6.2 mm, width: 23.1 mm, number of positions: 4, color: blue



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page17/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Plug-in bridge-FBS 5-6 BU-3036961

Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: blue



Plug-in bridge-FBS 10-6 BU-3032198

Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: blue



Plug-in bridge-FBS 20-6 BU-3032208

Plug-in bridge, pitch: 6.2 mm, width: 122.3 mm, number of positions: 20, color: blue



Plug-in bridge-FBS 50-6 BU-3032211

Plug-in bridge, pitch: 6.2 mm, width: 308.3 mm, number of positions: 50, color: blue



Labeled terminal marker

Zack marker strip-ZB 6 CUS-0824992

Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into

tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page18/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive

numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2

mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10



Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers

1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,

lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10



Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1

or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15

x 10.5 mm, Number of individual labels: 10



Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414

Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,

L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x

10.5 mm, Number of individual labels: 10



Marker for terminal blocks-ZB 6,LGS:U-N-1051430

Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,

N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field

size: 6.15 x 10.5 mm, Number of individual labels: 10



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page19/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Marker for terminal blocks-UC-TM 6 CUS-0824589

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:

snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual

labels: 80



Marker for terminal blocks-UCT-TM 6 CUS-0829602

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:

snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual

labels: 60



Marker pen

Marker pen-X-PEN 0,35-0811228

Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm



Partition plate

Partition plate-ATP-UT-QUATTRO-3047196

Partition plate, length: 69.7 mm, width: 2.2 mm, height: 52.5 mm, color: gray



Screwdriver tools

https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page20/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Screwdriver-SF-SL 0,6X3,5-100 S-VDE-1212587

Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use

as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip



Short-circuit connector

Short-circuit connector-FBSRH 2-6-3033812

Short-circuit connector, pitch: 6.2 mm, number of positions: 2, color: red



Terminal marking

Zack marker strip-ZB 6:UNBEDRUCKT-1051003

Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap

into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:



Marker for terminal blocks-UC-TM 6-0818085

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,

BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block

width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page21/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Marker for terminal blocks-UCT-TM 6-0828736

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,

BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,

THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:

5.6 x 10.5 mm, Number of individual labels: 60



Test plug terminal block

Test plugs-PS-6/2,3MM RD-3038736

Test plugs, color: red



Test plugs-MPS-MT-0201744

Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray



Test plugs-PS-6-3030996

Test plugs, Modular test plug, color: red



Test plugs-PS-6/2,3MM RD-3038736

Test plugs, color: red



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page22/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Test socket

Test adapter-PAI-4-FIX-5/6 BU-3035975

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-FIX-5/6 OG-3035974

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-FIX-5/6 YE-3035977

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-FIX-5/6 RD-3035976

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page23/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Test adapter-PAI-4-FIX-5/6 GN-3035978

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-FIX-5/6 BK-3035980

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-FIX-5/6 GY-3035982

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-FIX-5/6 VT-3035979

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-FIX-5/6 BN-3035981

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



https://www.phoenixcontact.com/us/products/3048836

01/16/2021Page24/24

Four-conductor universal terminal block-UT 4-QUATTRO HV

BU-3048836

Accessories

Test adapter-PAI-4-FIX-5/6 WH-3035983

4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch



Test adapter-PAI-4-N GY-3032871

4 mm test adapter, for terminal blocks with 5.2mm, 6.2mm and 8.2mm pitch



Warning label printed

Warning label-WS UT 4-3047332

Warning sign for UT terminal blocks



http://www.phoenixcontact.com