PA07M/883
PA07MU 1
PA07M/883
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent Current IQ 25°C ±35V VIN = 0, AV = 100 30 mA
1 Input Offset Voltage VOS 25°C ±35V VIN = 0, AV = 100 2 mV
1 Input Offset Voltage VOS 25°C ±12V VIN = 0, AV = 100 4.3 mV
1 Input Offset Voltage VOS 25°C ±50V VIN = 0, AV = 100 3.5 mV
1 Input Bias Current, +IN +IB 25°C ±35V VIN = 0 50 pA
1 Input Bias Current, –IN –IB 25°C ±35V VIN = 0 50 pA
1 Input Offset Current IOS 25°C ±35V VIN = 0 50 pA
3 Quiescent Current IQ –55°C ±35V VIN = 0, AV = 100 46 mA
3 Input Offset Voltage VOS –55°C ±35V VIN = 0, AV = 100 4.4 mV
3 Input Offset Voltage VOS –55°C ±12V VIN = 0, AV = 100 6.7 mV
3 Input Offset Voltage VOS –55°C ±50V VIN = 0, AV = 100 5.9 mV
3 Input Bias Current, +IN +IB –55°C ±35V VIN = 0 50 pA
3 Input BiasCurrent, –IN –IB –55°C ±35V VIN = 0 50 pA
3 Input Offset Current IOS –55°C ±35V VIN = 0 50 pA
2 Quiescent Current IQ 125°C ±35V VIN = 0, AV = 100 30 mA
2 Input Offset Voltage VOS 125°C ±35V VIN = 0, AV = 100 5 mV
2 Input Offset Voltage VOS 125°C ±12V VIN = 0, AV = 100 7.3 mV
2 Input Offset Voltage VOS 125°C ±50V VIN = 0, AV = 100 6.5 mV
2 Input Bias Current, +IN +IB 125°C ±35V VIN = 0 10 nA
2 Input Bias Current, –IN –IB 125°C ±35V VIN = 0 10 nA
2 Input Offset Current IOS 125°C ±35V VIN = 0 10 nA
4 Output Voltage, IO = 5A VO 25°C ±15.3V RL = 2.07Ω 10.3 V
4 Output Voltage, IO = 90mA VO 25°C ±50V RL = 500Ω 45 V
4 Output Voltage, IO = 2A VO 25°C ±29V RL = 12Ω 24 V
4 Current Limits ICL 25°C ±19V RL = 12Ω, RCL= 1Ω .54 .86 A
4 Stability/Noise EN 25°C ±35V RL = 100Ω, AV = 1, CL = 1nF 1 mV
4 Slew Rate SR 25°C ±35V RL = 500Ω 2.5 10 V/µs
4 Open Loop Gain AOL 25°C ±35V RL = 500Ω, F = 15Hz 89 dB
4 Common Mode Rejection CMR 25°C ±34.5V RL = 500Ω, F = DC, VCM = ±24.5V 80 dB
6 Output Voltage, IO = 5A VO –55°C ±15.3V RL = 2.07Ω 10.3 V
6 Output Voltage, IO = 90mA VO –55°C ±50V RL = 500Ω 45 V
6 Output Voltage, IO = 2A VO –55°C ±29V RL = 12Ω 24 V
6 Stability/Noise EN –55°C ±35V RL = 100Ω, AV = 1, CL = 1nF 1 mV
6 Slew Rate SR –55°C ±35V RL = 500Ω 2.5 10 V/µs
6 Open Loop Gain AOL –55°C ±35V RL = 500Ω, F = 15Hz 89 dB
6 Common Mode Rejection CMR –55°C ±34.5V RL = 500Ω, F = DC, VCM = ±24.5V 80 dB
5 Output Voltage, IO = 3A VO 125°C ±11.3V RL = 2.07Ω 6.3 V
5 Output Voltage, IO = 90mA VO 125°C ±50V RL = 500Ω 45 V
5 Output Voltage, IO = 2A VO 125°C ±29V RL = 12Ω 24 V
5 Stability/Noise EN 125°C ±35V RL = 100Ω, AV = 1, CL = 1nF 1 mV
5 Slew Rate SR 125°C ±35V RL = 500Ω 1.25 10 V/µs
5 Open Loop Gain AOL 125°C ±35V RL = 500Ω, F = 15Hz 89 dB
5 Common Mode Rejection CMR 125°C ±34.5V RL = 500Ω, F = DC, VCM = ±24.5V 80 dB
BURN IN CIRCUIT
* These components are used to stabilize device due
to poor high frequency characteristics of burn in
board.
** Input signals are calculated to result in internal power
dissipation of approximately 2.1W at case tempera-
ture = 125°C.
100KΩ
1Ω
1Ω
100KΩ
+15V
–15V
5
6
2
1
8
3
20Ω
** *
U.U.T
4
*
Table 4 Group A Inspection
PA07M/883
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA07MU REVM
PA07M/883
2 PA07MU
NEED TECHNICAL HELP? CONTACT APEX SUPPORT!
For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact apex.support@apexanalog.com.
International customers can also request support by contacting their local Apex Microtechnology Sales Representative.
To nd the one nearest to you, go to www.apexanalog.com
IMPORTANT NOTICE
Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change
without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further
notice to any specications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this informa-
tion, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual
property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the informa-
tion only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not
extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR
LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDER-
STOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER’S RISK.
Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnolgy, Inc. All other corporate names noted herein may be trademarks
of their respective holders.
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA07MU REVM