SCHOTTKY RECTIFIER 1 Amp
10BQ060
Bulletin PD-2.438 rev. C 05/01
1
www.irf.com
Major Ratings and Characteristics
IF(AV) Rectangular waveform 1.0 A
VRRM 60 V
IFSM @ tp = 5 µs sine 700 A
VF@
1.0 Apk, TJ=125°C 0.57 V
TJrange - 55 to 150 °C
Characteristics 10BQ060 Units
The 10BQ060 surface-mount Schottky rectifier has been de-
signed for applications requiring low forward drop and very small
foot prints on PC boards. Typical applications are in disk drives,
switching power supplies, converters, free-wheeling diodes,
battery charging, and reverse battery protection.
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Description/Features
SMB
Outline SMB
Dimensions in millimeters and (inches)
For recommended footprint and soldering techniques refer to application note #AN-994
3.80 (.150)
3.30 (.130)
4.70 (.185)
4.10 (.161)
2.15 (.085)
1.80 (.071)
2.40 (.094)
1.90 (.075)
1.30 (.051)
0.76 (.030)
0.30 (.012)
0.15 (.006)
5.60 (.220)
5.00 (.197)
4.0 (.157)
2.0 TYP.
(.079 TYP.)
2.5 TYP.
(.098 TYP.) SOLDERING PAD
CATHODE ANODE
1 2
12
POLARITY PART NUMBER
4.2 (.165)
10BQ060
Bulletin PD-2.438 rev. C 05/01
2www.irf.com
Part number 10BQ060
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V) 60
Voltage Ratings
VFM Max. Forward Voltage Drop (1) 0.6 V @ 1A
* See Fig. 1 0.76 V @ 2A
0.57 V @ 1A
0.69 V @ 2A
IRM Max. Reverse Leakage Current (1) 0.1 mA TJ = 25 °C
* See Fig. 2 5.0 mA TJ = 125 °C
CTTypical Junction Capacitance 62 pF VR = 5VDC, (test signal range 100kHz to 1MHz) 25°C
LSTypical Series Inductance 2.0 nH Measured lead to lead 5mm from package body
dv/dt Max. Volatge Rate of Charge 10000 V/ µs
(Rated VR)
TJ = 25 °C
TJ = 125 °C
VR = rated VR
Electrical Specifications
Parameters 10BQ Units Conditions
(1) Pulse Width < 300µs, Duty Cycle < 2%
TJMax. Junction Temperature Range -55 to 150 °C
Tstg Max. Storage Temperature Range -55 to 150 °C
RthJA Max. Thermal Resistance, Junction 140 °C/W DC operation
to Ambient
RthJL Max. Thermal Resistance, Junction 36 °C/W DC operation
to Lead (2)
wt Approximate Weight 0.10 g (oz.)
Case Style SMB Similar DO-214AA
Thermal-Mechanical Specifications
Parameters 10BQ Units Conditions
IF(AV) Max. Average Forward Current 1.0 A 50% duty cycle @ TL = 103 °C, rectangular wave form
IFSM Max. Peak One Cycle Non-Repetitive 700 A 5µs Sine or 3µs Rect. pulse
Surge Current 42 10ms Sine or 6ms Rect. pulse
EAS Non- Repetitive Avalanche Energy 11 mJ TJ = 25 °C, IAS = 1.0A, L = 4.0mH
IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. Va = 1.5 x Vr typical
Parameters 10BQ Units Conditions
Absolute Maximum Ratings
Following any rated
load condition and
with rated VRRM applied
(2) Mounted 1 inch square PCB, thermal probe connected to lead 2mm from package
10BQ060
Bulletin PD-2.438 rev. C 05/01
3
www.irf.com
Fig. 2 - Typical Peak Reverse Current
Vs. Reverse Voltage
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Instantaneous Forward Current - I F (A)
Forward Voltage Drop - VFM (V)
Reverse Current - I R (mA)
Reverse Voltage - VR (V)
Reverse Voltage - VR (V)
Junction Capacitance - C T (p F)
Thermal Impedance Z thJC (°C/W)
t1 , Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics (Per Leg)
0.1
1
10
0.2 0.4 0.6 0.8 1
Tj = 150˚C
Tj = 125˚C
Tj = 25˚C
.0001
0.001
0.01
0.1
1
10
0 102030405060
125˚C
100˚C
75˚C
50˚C
25˚C
Tj = 150˚C
10
100
1000
0 102030405060
Tj = 25˚C
0.1
1
10
100
0.00001 0.0001 0.001 0.01 0.1 1 10 100
Single Pulse
(Thermal Resistance)
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
2
t
1
t
P
DM
Notes:
1. Duty factor D = t1/ t2 .
2. Peak Tj = Pdm x ZthJC + Tc .
10BQ060
Bulletin PD-2.438 rev. C 05/01
4www.irf.com
Fig. 4 - Maximum Average Forward Current
Vs. Allowable Lead Temperature
Fig. 5 - Maximum Average Forward Dissipation
Vs. Average Forward Current
Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
Average Forward Current - I F(AV) (A)
Allowable Lead Temperature (°C)
Average Forward Current - I F(AV) (A)
Average Power Loss (Watts)
Square Wave Pulse Duration - Tp (Microsec)
Non-Repetitive Surge Current - I FSM (A)
60
70
80
90
100
110
120
130
140
150
160
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
DC
Square wave (D = 0.50)
Rated Vr applied
see note (2)
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 0.3 0.6 0.9 1.2 1.5
DC
RMS Limit
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
10
100
1000
10 100 1000 10000
At Any Rated Load Condition
And With rated Vrrm Applied
Following Surge
10BQ060
Bulletin PD-2.438 rev. C 05/01
5
www.irf.com
Marking & Identification Ordering Information
10BQ SERIES - TAPE AND REEL
WHEN ORDERING, INDICATE THE PART NUMBER
AND THE QUANTITY ( IN MULTIPLES OF 3000
PIECES).
EXAMPLE: 10BQ060TR - 6000 PIECES
10BQ SERIES - BULK QUANTITIES
WHEN ORDERING, INDICATE THE PART NUMBER
AND THE QUANTITY ( IN MULTIPLES OF 1000
PIECES).
EXAMPLE: 10BQ060 - 2000 PIECES
Tape & Reel Information
Dimensions in millimeters and (inches)
16 (0.63)
FEED DIRECTION
8 (0.32)
16 (0.63)
330 (13)
Each device has 8 characters, configurated 4 digits on two
rows, for identification. The first row designates the device
as manufactured by International Rectifier as indicated by
the letters "IR", and the Part Number ( indicates the current
rating and voltage/process). The second row indicates the
year and the week of manufacturing.
I R 1H
C = 15 V
E = 30 V
F = 40 V
H = 60 V
J = 100 V
IR logo
Voltage/ Process
Year
Week
YY WW (Date Code)
Current Rating (1A)
10BQ060
Bulletin PD-2.438 rev. C 05/01
6www.irf.com
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 05/01
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
