PRELIMINARY Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M High Speed Transistor Optocouplers Features Description High speed -1 MBit/s The HCPL4502M, HCPL4503M, HCPL2503M, 6N135M, 6N136M, HCPL2530M and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. Superior CMR - 10kV/s Dual-Channel HCPL2530M, HCPL2531M (Preliminary) CTR guaranteed 0-70C U.L. recognized (File # E90700, Vol. 2) 5,000Vrms (1 minute) isolation rating Superior CMR of 15,000V/s min. (HCPL4503M) >8mm creepage and clearance (option T) No base connection for improved noise immunity (HCPL4502M, HCPL4503M) A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal noise shield provides superior common mode rejection of up to 50,000V/s. Applications Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling Schematics N/C 1 Package Outlines 8 VCC + 1 8 8 VCC 1 V F1 + 2 7 VB _ 2 7 V01 8 V 8 F _ 3 6 VO _ 3 6 V02 1 1 V F2 N/C 4 5 GND 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M + 4 5 GND HCPL2530M/HCPL2531M Pin 7 is not connected in HCPL4502M and HCPL4503M (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers October 2008 PRELIMINARY Symbol Parameter Condition Value Units TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +100 C TSOL Lead Solder Temperature (Wave) 260 for 10 sec C IF (avg) DC/Average Forward Input Current Each Channel(1) 25 mA IF (pk) Peak Forward Input Current Each Channel(2) 50% duty cycle, 1ms P.W. 50 mA IF (trans) Peak Transient Input Current Each Channel 1s P.W., 300pps 1.0 A VR Reverse Input Voltage Each Channel 5 V PD Input Power Dissipation Each Channel 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M 100 mW HCPL2530M, HCPL2531M(3) 45 EMITTER DETECTOR IO (avg) Average Output Current Each Channel 8 mA IO (pk) Peak Output Current Each Channel 16 mA VEBR Emitter-Base Reverse Voltage 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage IB Base Current 6N135M, 6N136M and HCPL2503M only PD Output Power Dissipation Each Channel 6N135M, 6N136M and HCPL2503M only -0.5 to 20 V 5 mA 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M(4) 100 mW HCPL2530M, HCPL2531M 35 mW Notes: 1. Derate linearly above 70C free-air temperature at a rate of 0.8mA/C. 2. Derate linearly above 70C free-air temperature at a rate of 1.6mA/C. 3. Derate linearly above 70C free-air temperature at a rate of 0.9 mW/C. 4. Derate linearly above 70C free-air temperature at a rate of 2.0 mW/C. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 2 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Absolute Maximum Ratings (TA = 25C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. PRELIMINARY Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.7 V EMITTER VF BVR Input Forward Voltage Input Reverse Breakdown Voltage VF/TA Temperature Coefficient of Forward Voltage IF = 16mA, TA =25C All IF = 16mA All 1.45 IR = 10 A All IF = 16mA All -1.6 IF = 0mA, VO = VCC = 5.5V, TA =25C All 0.003 0.5 IF = 0mA, VO = VCC = 15V, TA =25C 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M 0.005 1 IF = 0mA, VO = VCC = 15V All 1.8 5.0 V mV/C DETECTOR IOH ICCL ICCH Logic High Output Current Logic Low Supply Current Logic High Supply Current A 50 IF = 16mA, VO = Open, VCC = 15V 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M 145 200 IF1 = IF2 = 16mA, VO = Open, VCC = 15V HCPL2530M HCPL2531M 250 400 IF = 0mA, VO = Open, VCC = 15V, TA =25C 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M 1 IF = 0mA, VO = Open, VCC = 15V 6N135M 6N136M HCPL4502M HCPL4503M HCPL2503M 2 IF = 0mA, VO = Open, VCC = 15V HCPL2530M HCPL2531M 0.02 A A 4 *All Typicals at TA = 25C (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 3 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics (TA = 0 to 70C Unless otherwise specified) PRELIMINARY Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit COUPLED CTR Current Transfer Ratio(5) IF = 16mA, VO = 0.4 V, VCC = 4.5V, TA =25C IF = 16mA, VCC = 4.5V VOL Logic LOW Output Voltage 6N135M HCPL2530M 7 18 50 % 6N136M HCPL4502M HCPL4503M HCPL2531M 19 30 50 % HCPL2503M 12 27 % VOL = 0.4V 6N135M 5 21 % VOL = 0.5V HCPL2530M VOL = 0.4V 6N136M HCPL4502M HCPL4503M 15 30 % 9 30 % VOL = 0.5V HCPL2531M VOL = 0.4V HCPL2503M IF = 16mA, IO = 1.1mA, VCC = 4.5V, TA =25C IF = 16mA, IO = 3mA, VCC = 4.5V, TA =25C 6N135M 0.10 0.4 HCPL2530M 0.10 0.5 6N136M HCPL2503M HCPL4503M 0.15 0.4 HCPL2531M 0.15 0.5 IF = 16mA, IO = 0.8mA, VCC = 4.5V 6N135M HCPL2530M 0.5 IF = 16mA, IO = 2.4mA, VCC = 4.5V HCPL4502M HCPL4503M HCPL2531M 0.5 V *All Typicals at TA = 25C Note: 5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 4 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) PRELIMINARY Switching Characteristics (VCC = 5V) Symbol Parameter TPHL TPLH |CMH| |CML| Propagation Delay Time to Logic LOW Propagation Delay Time to Logic HIGH Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low Test Conditions Device Min. Typ.* Max. Unit TA = 25C, RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 0.45 1.5 s RL = 1.9k, IF = 16mA, TA = 25C(7) (Fig. 7) 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 0.45 0.8 s RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 2.0 s RL = 1.9k, IF = 16mA(7) (Fig. 7) 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 1.0 s TA = 25C, (RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 0.5 1.5 s RL = 1.9k, IF = 16mA(7) (Fig. 7) TA = 25C 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 0.3 0.8 s RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135M HCPL2530M 2.0 s RL = 1.9k, IF = 16mA(7) (Fig. 7) 6N136M HCPL4502M HCPL4503M HCPL2503M HCPL2531M 1.0 s IF = 0mA, VCM = 10VP-P, RL = 4.1k, TA = 25C(8) (Fig. 8) 6N135M HCPL2530M 10,000 V/s IF = 0mA, VCM = 10VP-P, RL = 1.9k, TA = 25C(8) (Fig. 8) 6N136M HCPL4502M HCPL2503M HCPL2531M 10,000 V/s IF = 0mA, VCM = 1,500VP-P, RL = 1.9k, TA = 25C(8) (Fig. 8) HCPL4503M IF = 16mA, VCM = 10VP-P, RL = 4.1k, TA = 25C(8) (Fig. 8) 6N135M HCPL2530M 10,000 V/s IF = 16mA, VCM = 10VP-P, RL = 1.9k(8) (Fig. 8) 6N136M HCPL4502M HCPL2503M HCPL2531M 10,000 V/s IF = 0mA, VCM = 1,500VP-P, RL = 1.9k, TA = 25C(8) (Fig. 8) HCPL4503M 15,000 15,000 30,000 30,000 ** All Typicals at TA = 25C Notes: 6. The 4.1k load represents 1 LSTTL unit load of 0.36mA and 6.1k pull-up resistor. 7. The 1.9k load represents 1 TTL unit load of 1.6mA and 5.6k pull-up resistor. 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 5 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) PRELIMINARY Isolation Characteristics (TA = 0 to 70C Unless otherwise specified) Symbol Characteristics Test Conditions Min 5,000 VISO Withstand Insulation Test Voltage RH 50%, TA = 25C, II-O 10A, t = 1 min., f = 50Hz(9)(11) RI-O Resistance (Input to Output) VI-O = 500VDC(9) CI-O Capacitance (Input to Output) f = 1MHz, VI-O = HFE DC Current Gain 0V(9) IO = 3mA, VO = 5V(9) 500VDC(10) Typ** Max Unit VRMS 1011 1 pF 150 II-I Input-Input Insulation Leakage Current RH 45%, VI-I = t = 5 s, (HCPL2530M/2531M only) 0.005 A RI-I Input-Input Resistance VI-I = 500 VDC(10) (HCPL2530M/2531M only) 1011 CI-I Input-Input Capacitance f = 1MHz(10) (HCPL2530M/2531M only) 0.03 pF Notes: 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. 11. 5,000Vrms for 1 minute duration is equivalent to 6,000Vrms for 1 second duration. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 6 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) PRELIMINARY Fig. 2 Normalized CTR vs. Temperature 1.2 1.0 1.0 NORMALIZED CTR NORMALIZED CTR Fig. 1 Normalized CTR vs. Forward Current 1.2 0.8 0.6 0.4 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.2 0.0 0.1 1 0.8 0.6 0.4 IF = 16mA VCC = 4.5V VO = 0.4V Normalized to: TA = 25C 0.2 10 0.0 -40 100 -20 0 20 IF - FORWARD CURRENT (mA) IO - OUTPUT CURRENT (mA) IOH - LOGIC HIGH OUTPUT CURRENT (nA) 18 16 IF = 40mA 14 35mA 12 30mA 10 25mA 8 20mA 6 15mA 4 10mA 2 5mA 2 4 6 8 10 12 14 80 100 16 18 100 IF = 0 mA VCC = 5.5V VO = 5.5V 10 1 0.1 -40 0 0 60 Fig. 4 Logic High Output Current vs. Temperature Fig. 3 Output Current vs. Output Voltage TA = 25C VCC = 5 V 40 TA - TEMPERATURE (C) 20 -20 0 20 40 60 80 100 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Fig. 6 Propagation Delay vs. Load Resistance Fig. 5 Propagation Delay vs. Temperature 800 TP - PROPAGATION DELAY (ns) Tp - PROPAGATION DELAY (ns) 700 RL = 4.1k (tPLH) 600 500 RL = 1.9k (tPLH) 400 300 RL = 1.9k (tPHL) RL = 4.1k (tPHL) 200 Frequency = 10kHz Duty Cycle = 10% IF = 16mA VCC = 5 V 100 0 -40 -20 0 20 40 60 80 IF = 16mA (tPLH) IF = 10mA (tPHL) IF = 10mA (tPLH) 100 100 IF = 16mA (tPHL) Frequency = 10kHz Duty Cycle = 10% IF = 16mA VCC = 5 V 1 TA - TEMPERATURE (C) (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 1000 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 7 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Typical Performance Curves PRELIMINARY Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s 1 Noise Shield 8 + 2 7 VF - 3 6 VCC VB Pulse Generator tr = 5ns Z O = 50 +5 V 10% DUTY CYCLE I/f < 100S RL VO 4 Rm 5 IF MONITOR 1 8 VCC +5 V RL VF1 - 7 2 V01 VO C L = 1.5 F 3 6 4 5 VF2 + Rm C L = 1.5 F GND Noise Shield + - VO 0.1 F I F Monitor IF V02 0.1 F GND Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, HCPL2503M, HCPL4502M and HCPL4503M IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 7 Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC + +5 V IF VB VF1 - RL Noise Shield 1 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 VO B VO VFF 0.1 F VFF 4 5 + GND VF2 + - V02 0.1 F GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, HCPL2503M, HCPL4502M and HCPL4503M VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Fig. 8 Common Mode Immunity Test Circuit (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 8 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Test Circuits PRELIMINARY Through Hole 0.4" Lead Spacing PIN 1 ID. 4 3 2 PIN 1 ID. 1 4 3 2 1 0.270 (6.86) 0.250 (6.35) 5 6 7 0.270 (6.86) 0.250 (6.35) 8 5 6 0.070 (1.78) 0.045 (1.14) 0.020 (0.51) MIN 0.200 (5.08) 0.140 (3.55) 0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 7 8 0.390 (9.91) 0.370 (9.40) SEATING PLANE SEATING PLANE 0.390 (9.91) 0.370 (9.40) 0.016 (0.40) 0.008 (0.20) 0.100 (2.54) TYP 0.070 (1.78) 0.045 (1.14) 0.004 (0.10) MIN 0.200 (5.08) 0.140 (3.55) 15 MAX 0.154 (3.90) 0.120 (3.05) 0.300 (7.62) TYP 0.022 (0.56) 0.016 (0.41) 0.016 (0.40) 0.008 (0.20) 0.100 (2.54) TYP Surface Mount 8-Pin DIP - Land Pattern (option S) 0.390 (9.91) 0.370 (9.40) 4 3 2 1 0.070 (1.78) PIN 1 ID. 0.060 (1.52) 0.270 (6.86) 0.250 (6.35) 5 6 7 0 to 15 0.400 (10.16) TYP 0.100 (2.54) 8 0.295 (7.49) 0.070 (1.78) 0.045 (1.14) 0.020 (0.51) MIN 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP Lead Coplanarity : 0.004 (0.10) MAX 0.415 (10.54) 0.300 (7.62) TYP 0.030 (0.76) 0.016 (0.41) 0.008 (0.20) 0.045 [1.14] 0.315 (8.00) MIN 0.405 (10.30) MAX. Note: All dimensions are in inches (millimeters) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 9 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Package Dimensions PRELIMINARY Option Example Part Number Description No option 6N135M S 6N135SM SD 6N135SDM T 6N135TM 0.4" lead spacing V 6N135VM IEC60747-5-2 (approval pending) TV 6N135TVM IEC60747-5-2 (approval pending); 0.4" lead spacing SV 6N135SVM IEC60747-5-2 (approval pending); surface mount SDV 6N135SDVM IEC60747-5-2 (approval pending); surface mount; tape and reel Standard through hole lead form Surface mount lead bend Surface mount; tape and reel Marking Information 1 2503 XX YY V 3 4 B 2 6 5 Definitions 1 Fairchild logo 2 Device number 3 IEC60747-5-2 mark (Note: Only appears on parts ordered with this option - See order entry table) (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 4 Two digit year code, e.g., `08' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code www.fairchildsemi.com 10 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Ordering Information PRELIMINARY D0 P0 t K0 P2 E F A0 W1 d t P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 16.0 0.3 Tape Thickness 0.30 0.05 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 7.5 0.1 2.0 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 12.0 0.1 10.30 0.20 B0 10.30 0.20 K0 4.90 0.20 W1 d R (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 Cover Tape Width 13.2 0.2 Cover Tape Thickness 0.1 max Max. Component Rotation or Tilt 10 Min. Bending Radius 30 www.fairchildsemi.com 11 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Carrier Tape Specifications PRELIMINARY Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers Reflow Profile 245 C, 10-30 s Temperature (C) 300 260 C peak 250 200 150 Time above 183C, <160 sec 100 50 Ramp up = 2-10C/sec 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) * Peak reflow temperature: 260 C (package surface temperature) * Time of temperature higher than 183 C for 160 seconds or less * One time soldering reflow is recommended (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 12 PRELIMINARY Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM * TM (R) (R) Fairchild (R) Fairchild Semiconductor FACT Quiet SeriesTM (R) FACT FAST(R) FastvCoreTM FlashWriter(R) * FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM PDP SPMTM Power-SPMTM The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM (R) UHC Ultra FRFETTM UniFETTM VCXTM VisualMaxTM (R) * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I36 (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.1 www.fairchildsemi.com 13 Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- High Speed Transistor Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.