SURFACE MOUNT DISPLAY Part Number: KCDA56-107 Super Bright Yellow Features Description z 0.56 inch digit height. The Super Bright Yellow device is made with AlGaInP (on z Low current operation. GaAs substrate) light emitting diode chip. z Excellent character appearance. z Mechanically rugged. z Gray face, white segment. z Package: 200pcs/ reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAF9112 REV NO: V.11 APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/12/2013 DRAWN: Q.M.Chen PAGE: 1 OF 5 ERP: 1352000303 Selection Guide Part No. Dice KCDA56-107 Iv (ucd) [1] @ 10mA Lens Type Super Bright Yellow (AlGaInP) Min. Typ. 31000 76000 *14000 *29000 White Diffused Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF9112 REV NO: V.11 APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/12/2013 DRAWN: Q.M.Chen PAGE: 2 OF 5 ERP: 1352000303 Super Bright Yellow KCDA56-107 SPEC NO: DSAF9112 REV NO: V.11 APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/12/2013 DRAWN: Q.M.Chen PAGE: 3 OF 5 ERP: 1352000303 KCDA56-107 Recommended Soldering Pattern (Units : mm; Tolerance: 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF9112 REV NO: V.11 APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/12/2013 DRAWN: Q.M.Chen PAGE: 4 OF 5 ERP: 1352000303 PACKING & LABEL SPECIFICATIONS KCDA56-107 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAF9112 REV NO: V.11 APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/12/2013 DRAWN: Q.M.Chen PAGE: 5 OF 5 ERP: 1352000303