EXC-CET102U - Panasonic - Product.Network

– 252 –

Chip EMI Filters

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Product Code Type Circuit Nominal

CapacitanceValue

Form

Noise Filter Chip type T-circuit

EMI filter

The first two digits are

significant figures of

capacitance value and the

third one denotes the number

of zeros following.

Code

Packing

Embossed Carrier Taping

Ferrite core

Chip capacitor

Adhesive

Electrode

1.8±0.2

2.7±0.3

0.5±0.2

4.5±0.4

0.5±0.2

1.0±0.2

Size : 1807 inch

Mass (Weight) : 92.5 mg/pc.

■Construction ■Dimensions in mm (not to scale)

Chip EMI Filters

Type:EXCCET

■Features

● Rated current (2 A max.)

● Eight capacitance values in a wide range, related to

the noise frequency

● Suitable for narrow pitch insertion

● Suitable for applications requiring thin design

● RoHS compliant

■Explanation of Part Numbers

■Recommended Applications

● Digital equipment such as PCs, word processors,

printers, HDD, PPC, and communication equipment.

● Digital audio and video equipment.

● AC adapters, and switching power supplies.

● Electronic musical instruments, and other digital

equipment.

Feb. 201101

– 253 –

Chip EMI Filters

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Measurement Circuit

촞

50 액

Sample

1M 10M 100M 1G

Frequency (Hz)

Attenuation(dB)

471 220

470

101

103

222 102

271

Chip component

P1P2P0

Compartment

Sprocket hole

φD0

Tape running direction

φ C

φ D

φ B

φ A

φAφBφCφD

Dimensions

(mm) 180.0 0 60.0±1.0 13.0±0.5

21.0±0.8

Part Number

Rated

Voltage

(V DC)

(1)

Capacitance

(pF)

Tolerance

(%)

(2)

Characteristics

Rated

Current

(A DC)

Resistance

(m액)

25 dB Attenuate

Frequency

(MHz)

15 dB Attenuate

Frequency

(MHz)

EXCCET220U 50 22 ±20 YB 2 50 max. 800 to 1000 600 to 1000

EXCCET470U 50 47 ±20 YB 2 50 max. 450 to 550 350 to 1000

EXCCET101U 50 100 ±20 YB 2 50 max. 300 to 450 200 to 900

EXCCET271U 50 270 ±20 YB 2 50 max. 200 to 300 80 to 700

EXCCET471U 50 470 ±20 YB 2 50 max. 100 to 220 50 to 700

EXCCET102U 50 1000 ±20 YB 2 50 max. 65 to 200 30 to 700

EXCCET222U 50 2200 ±20 YB 2 50 max. 35 to 180 15 to 700

EXCCET103U 50 10000 ±20 YB 2 50 max. 15 to 120 15 to 700

Part Number Kind of Taping Pitch (P1) Quantity

EXCCET첸첸첸UEmbossed Carrier Taping 4 mm 1000 pcs./reel

■Packaging Methods (Taping)

● Standard Quantity

● Taping Reel

● Embossed Carrier Taping

ABWFP

Dimensions

(mm) 2.2±0.2 4.9±0.2 12.0±0.2

5.50±0.05

4.0±0.1

P2P0φD0t2

Dimensions

(mm) 2.0±0.1 4.0±0.1 1.5±0.1 3.5 max.

–3.0

EWT

Dimensions

(mm) 2.0±0.5 13.0±1.0 16.5 max.

(1) Please inquire to us about the particular capacitance value, on a range of 22 to 10000 pF.

(2) Characteristics YB: Maximum capacitance is ±10 % over the temperature range of –25 °C to +85 °C in reference to +20 °C.

■Attenuation Characteristics (Reference Data)

■Ratings

● Category Temperature Range –40 °C to +85 °C

Feb. 201101

– 254 –

Chip EMI Filters

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

5.4

1.3 1.3

1.15

1.0

0.2

Copper foil

Resist

1.4

1.15

1.0

0.2

Copper foil

Resist

1.4

5.4

1.3 1.3

1.4

Resist

2.54

Preheating

Peak

Heating

Temperature

Time

■Recommended Land Pattern Design(mm)

● For Single Mounting ● For High Density Mounting

■Recommended Soldering Conditions

Recommendations and precautions are described below.

● Preheat with a blast of hot air or similar method. Use a soldering iron with a tip temperature of 350 °C or less. Solder

each electrode for 3 seconds or less.

● Never touch this product with the tip of a soldering iron.

Temperature Time

Preheating 140 °C to 160 °C 60 s to 120 s

Main heating Above 200 °C 30 s to 40 s

Peak 235 ± 10 °C max. 10 s

Temperature Time

Preheating 150 °C to 170 °C 60 s to 120 s

Main heating Above 230 °C 30 s to 40 s

Peak max. 260 °C max. 10 s

●Recommended soldering conditions for reﬂ ow

For soldering (Example : Sn-37Pb)

For lead-free soldering (Example : Sn/3Ag/0.5Cu)

· Reﬂ ow soldering shall be performed a maximum of

two times.

· Please contact us for additional information when

used in conditions other than those speciﬁ ed.

· Please measure the temperature of the terminals

and study every kind of solder and printed circuit

board for solderability be fore ac tu al use.

Safety Precautions

The following are precautions for individual products. Please also refer to the common precautions shown on page 4

of this catalog.

1. Use rosin-based ﬂ ux or halogen-free ﬂ ux.

2. For cleaning, use an alcohol-based cleaning agent. Before using any other type, con sult with our sales person

in advance.

3. Do not apply shock to Chip EMI Filters (hereafter called the ﬁ lters) or pinch them with a hard tool (e.g. pliers and

tweezers). Otherwise, their bodies may be chipped, affecting their performance. Excessive mechanical stress

may damage the filters. Handle with care.

4. Avoid applying static electricity to the ﬁ lters.

5. The performance of the ﬁ lters deteriorates in a circuit that is susceptible to surges or other abnormal voltages.

Carefully check the circuit operations before use.

6. Store the ﬁ lters in a location with a temperature ranging from –5 °C to +40 °C and a relative humidity of 40 % to 60 %,

where there are no rapid changes in temperature or humidity.

7. Use the ﬁ lters within a year after the date of the outgoing inspection indicated on the packages.

Using the land pattern which we do not recommend,

or mounting by the solder under 180µm, verify the

performance, reliability, etc. thoroughly.

●Flow soldering

· Chip EMI Filters cannot be mounted on a printed circuit board by ﬂ ow soldering.

Mount them by reﬂ ow soldering.

Sep. 201000