QMT42 Series Long-Range Diffuse Sensors Adjustable Sensing Distance of up to 6 m (20') Features * Powerful, collimated infrared light source and special lensing allows reliable long-range detection of even the darkest objects * Compact, rugged, low cost self-contained sensors in metal die cast housings * Leakproof IP67 (NEMA 6) construction for reliable sensing in harsh environments * Outstanding electrical noise immunity * Dual LED system indicates sensor performance * Choice of integral cable or quick disconnect connector Infrared, 880 nm QMT42 Long-Range Diffuse Mode Models Range QMT42VN6DX QMT42VN6DXQ QMT42VP6DX QMT42VP6DXQ ! Cable Supply Voltage WARNING . . . NPN 10-30V dc 2 m (6.5') 4-pin Euro QD Beam Pattern Performance based on 90% reflectance white test card 1000 2 m (6.5') 4-pin Euro QD 10 mm (0.4") to 6m (20') Excess Gain Output Type E X C E S S G A I N PNP QMT42DX QMT42DX 30 mm Diffuse Mode 100 Diffuse Mode 0.8 in 10 mm 0.4 in 0 10 1 0.01 m 0.033 ft 0 10 mm 0.4 in 20 mm 0.8 in 30 mm 1.2 in 0 0.1 m 0.33 ft 1.0 m 3.3 ft 10 m 33 ft 1.2 in 20 mm 1.5 m 5 ft 3.0 m 10 ft 4.5 m 15 ft 6.0 m 20 ft 7.5 m 25 ft DISTANCE DISTANCE Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Printed in USA P/N 57890 QMT42 Series Long-Range Diffuse Sensors QMT42DX Specifications Sensing Beam Infrared, 880 nm Supply Voltage and Current 10 to 30V dc (10% maximum ripple) at less than 40 milliamps Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPDT (complementary) solid-state dc switch; Choose NPN (current sinking) or PNP (current sourcing) models. Light operate: N.O. output conducts when the sensor sees its own modulated light Dark operate: N.C. output conducts when the sensor sees dark Output Rating 100 mA maximum (each output) Off-state leakage current: <5 microamps at 30V dc; On-state saturation voltage: <1V at 10 mA dc; <1.5V at 100 mA dc Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs Overload trip point 130mA, typical, at 20C Output Response Time 1 millisecond on and off NOTE: 100 millisecond delay on power-up; outputs are non-conducting during this time Repeatability of Response 250 microseconds Sensing Hysteresis Less than 20% of set sensing distance Adjustments 4-turn slotted Gain (sensitivity) adjustment potentiometer (clutched at both ends of travel) Indicators Two LEDs: Green and Yellow GREEN glowing steadily GREEN flashing YELLOW glowing steadily YELLOW flashing = = = = power to sensor is ON output is overloaded light is sensed; normally open output ON marginal excess gain (1-1.5x) in light condition Construction Housings are die-cast zinc alloy with black acrylic polyurethane finish; lenses are acrylic Environmental Rating IP67; NEMA 6 Connections 2 m (6.5') or 9 m (30') attached cable, or 4-pin Euro-style quick-disconnect fitting; Cables for QD models are purchased separately Operating Temperature -20 to +55C (-4 to +131F); Maximum relative humidity 90% at 50C (non-condensing) Certifications Approvals in process QMT42DX Dimensions Cabled models Quick-Disconnect models 18.0 mm (0.71") Green LED Power/Overload Indicator Yellow LED Output/Marginal Indicator 19.2 mm (0.76") o 3.2 mm (0.125") (4 Holes) 58.0 mm (2.28") M12 x 1 x 18 mm Euro-style 2 x 3.1mm (0.12") 10.0 mm (0.39") 2 x 3.1mm (0.12") 12.3 mm (0.48") 23.9 mm (2) (0.94") 42.0 mm (1.65") page 2 27.1 mm (2) (1.07") Threaded M4 x 0.7 Mounting Holes 76.2 mm (3.00") QMT42 Series Long-Range Diffuse Sensors QMT42DX Hookups Sensors with NPN (Sinking) Outputs Sensors with PNP (Sourcing) Outputs Cabled Models Cabled Models bu bn bk wh bn bu bk wh - 10-30V dc + Load Load Quick Disconnect Models + 10-30V dc - Load Load Quick Disconnect Models bn + 10-30V dc bu bk Load wh bu 10-30V dc bn + bk Load wh Load Load Quick-Disconnect (QD) Cables The following is the selection of cables available for the QMT42 QD models Style Model Length 4-pin Euro-Style MQDC-406 MQDC-415 MQDC-430 2 m (6.5') 5 m (15') 9 m (30') straight For use with right-angle MQDC-406RA MQDC-415RA MQDC-430RA Pinout o15 mm (0.6") 44 mm max. (1.7") All QMT42 sensors with quick-disconnect fitting 4-pin Euro-Style Dimensions M12 x 1 Pin #1 Brown Wire 38 mm max. (1.5") Pin #4 Black Wire 2 m (6.5') 5 m (15') 9 m (30') Pin #2 White Wire Pin #3 Blue Wire 38 mm max. (1.5") M12 x 1 o15 mm (0.6") page 3 QMT42 Series Long-Range Diffuse Sensors QMT42 Mounting Brackets SMB42T * Right-angle * Stainless steel SMB42F 5.0 mm (0.20") R 24.1 mm (0.95") R 5.1 mm (0.20") 2x M4 x 0.7 12.7 mm (0.50") 4.32 mm (0.170") Slot (2) 20.3 mm (0.80") 28.3 mm (1.12") 25.4 mm (1.00") 25.4 mm (1.00") 20 o 3.05 mm Slot (0.120") SMB42L R 3.1 mm (0.12") (2) 9.6 mm (0.38") 37.1 mm (1.46") 48.4 mm (1.91") SMB42U 40.0 mm (1.58") * 13 gauge * Stainless steel 38.9 mm (1.53") 2x M4 x 0.7 6.4 mm (0.25") 3.0 mm (0.12") 2.3 mm (0.09") 23.3 mm (0.92") 20.1 mm (0.79") * 13 gauge * Stainless steel 5.0 mm (0.20") 6.4 mm (0.25") 4x M3 x 0.5 45.5 mm (1.79") 4x M4 x 0.7 20.0 mm (0.79") 12.7 mm (0.50") 90 2.5 mm (0.10") 10.0 mm (0.40") 10 (TYP) 15 (2) CL 31.8 mm (1.25") o 3.05 mm (0.120") * 13 gauge * Stainless steel 12.7 mm (0.50") 6.5 mm (0.25") 2.3 mm (0.09") 3x 10.0 mm (0.40") 23.3 mm (0.92") 33.0 mm (1.30") 25.4 mm (1.00") 3.1 mm (0.12") 2x M3 x 0.5 12.7 mm (0.50") 9.6 mm (0.38") 2x 8.9 mm (0.35") 12.7 mm (0.50") 30.0 mm (1.18") 25.4 mm (1.00") 25.4 mm (1.00") 23.3 mm (0.92") 2.3 mm (0.09") 3.1 mm (0.12") 4x M3 x 0.5 9.6 mm (0.38") SMB30SK * 13 gauge * Stainless steel and PBT polyester 50.8 mm (2.00") 66.5 mm (2.62") WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. 78.0 mm (3.07") 56.7 mm (2.31") Assembled 68.0 mm (2.68") 2 x Hole for #6 Machine Screw 29.0 mm (1.14") Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 * Phone: 612.544.3164 * Fax: 612.544.3573 * E-mail: sensors@baneng.com