DIODE MODULE DD160KB UL;E76102 M Power Diode Module DD160KB Series are designed for various rectifier circuits. DD160KB has two diode chips connected in series and the mounting base is electrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1600V is available for various input voltages. Isolated mounting base Two elements in a package for simple (single and three phase) bridge connections Highly reliable glass passivated chips High surge current capability 93.5max 30max 1 23 23 3-M5 21 16.5 Applications Various rectifiers, Battery chargers, DC motor drives 2-6.5 2 13 26max 80 3 Unit Maximum Ratings Symbol Tj25 unless otherwise specified Item Ratings DD160KB40 DD160KB80 DD160KB120 DD160KB160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V Symbol Item Ratings Unit IFAV Conditions Average Forward Current Single phase, half wave, 180 conduction, Tc=90 IFRMS R.M.S. Forward Current Single phase, half wave, 180 conduction, Tc=90 IFSM Surge Forward Current 1 2cycle, It It Value for one cycle of surge current Tj Operating Junction Temperature 2 2 Tstg Storage Temperature VISO Isolation Breakdown VoltageR.M.S. Mounting Torque 60HZ, peak value, non-repetitive A.C. 1minute 160 A 250 A 3200 A 42600 A2S -40 to 150 -40 to 125 2500 V MountingM6 Recommended Value 2.5-3.925-40 4.748 TerminalM5 Recommended Value 1.5-2.515-25 2.728 Nm fB 170 g Ratings Unit Mass Typical Value Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. Tj150VRVRRM 30 mA VFM Forward Voltage Drop, max. Forward current 500A, Inst measurement 1.35 V Junction to case 0.30 /W Rthj-c Thermal Impedance, max. SanRex Conditions (R) 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/ DD160KB Power Dissipation PavW Maximum Forward Characteristics Forward CurrentA = Per one element Three Phase Per one element Maximum Forward Voltage DropV Average Forward CurrentA Average Forward Current vs. Allowable Case Temperature Cycle Surge Forward Current Rating Non-Repetitive Surge Forward CurrentA Per one element Per one element Tj25 start Hz Single Phase Three Phase D.C. = Start TimeCycles Average Forward CurrentA Transient Thermal Impedance j-c/W Single Phase Allowable Case Temperature Tc D.C. Average Forward Current vs. Power Dissipation Transient Thermal Impedance Junction to Case Per one element Time tsec SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/