Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC925LC5 v02.0614 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Typical Applications Features The HMC925LC5 is ideal for: High Conversion Gain: 16.5 dB * Point-to-Point and Point-to-Multi-Point Radio Excellent Sideband Rejection: -30 dBc * Military Radar, EW & ELINT LO / RF Rejection: 22 dBc * Satellite Communications High Output IP3: +29 dBm * Sensors 32 Lead 5x5 mm SMT Ceramic Package: 25 mm Functional Diagram General Description The HMC925LC5 is a compact GaAs MMIC I/Q upconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of 16.5 dB with 30 dBc of sideband rejection. The HMC925LC5 utilizes a RF amplifier preceded by an I/Q mixer where the LO is driven by a driver amplifier. IF1 and IF2 mixer inputs are provided and an external 90 hybrid is needed to select the required sideband. The I/Q mixer topology reduces the need for filtering of the unwanted sideband. The HMC925LC5 is a much smaller alternative to hybrid style single sideband upconverter assemblies and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. Electrical Specifications [1][2], TA = +25C, IF = 2000 MHz, LO = +0 dBm, Vdd1, 2, 3, 4 = +5V, Idd2 + Idd3 + Idd4 = 130 mA LSB [1][2], Idd1 = 114 mA Parameter Min. Typ. Max. Units Frequency Range, RF 5.5 - 8.6 GHz Frequency Range, LO 5 - 11.1 GHz Frequency Range, IF 0-3 GHz Conversion Gain 16.5 dB -30 dBc 1 dB Compression (Output) 21 dBm IP3 (Output) 29 dBm LO / RF Rejection [3] 22 dBc Supply Current Idd1 114 mA Supply Current Idd2 + Idd3 + Idd4 [2] 130 mA Sideband Rejection 14 [1] Unless otherwise noted all measurements performed with high side LO, IF = 2000 MHz and external IF 90 hybrid. [2] Adjust Vgg between -2 to 0V to achieve Idd2 + Idd3 + Idd4 = 130 mA Typical. [2] The LO / RF Rejection is defined as the LO signal level at the RF output port relative to the desired RF output signal level. 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90 Hybrid, IF = 2000 MHz 25 20 20 15 +25 C +85 C -40 C 10 5 15 10 0 dBm -3 dBm 5 0 0 5 6 7 8 5 9 6 0 -5 -5 -10 -15 -20 +25 C +85 C -40 C 9 -10 -15 +25 C +85 C -40 C -20 -25 -30 -30 5 6 7 8 9 5 6 RF FREQUENCY (GHz) 7 8 9 FREQUENCY (GHz) Sideband Rejection vs. Temperature IF Return Loss [1] 0 SIDE BAND REJECTION (dBc) 0 RETURN LOSS (dB) 8 LO Return Loss vs. Temperature 0 RETURN LOSS (dB) RETURN LOSS (dB) RF Return Loss vs. Temperature -25 7 RF FREQUENCY (GHz) RF FREQUENCY (GHz) -10 IF1 IF2 -20 -30 -40 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Conversion Gain, LSB vs. LO Drive 25 CONVERSION GAIN (dB) CONVERSION GAIN (dB) Conversion Gain, LSB vs. Temperature +25 C +85 C -40 C -10 -20 -30 -40 -50 0 1 2 3 FREQUENCY (GHz) 4 5 6 7 8 9 RF FREQUENCY (GHz) [1] Data taken without external IF 90 hybrid For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90 Hybrid, IF = 2000 MHz Input P1dB, LSB vs. Temperature Output P1dB, LSB vs. Temperature 24 14 +25 C +85 C -40 C 22 P1dB (dBm) P1dB (dBm) 12 10 8 6 20 18 +25 C +85 C -40 C 16 4 14 2 12 0 5 6 7 8 5 9 6 7 8 9 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Input IP3, LSB vs. Temperature Output IP3, LSB vs. Temperature 30 40 25 +25 C +85 C -40 C 35 IP3 (dBm) IP3 (dBm) 20 15 30 25 10 +25 C +85 C -40 C 5 20 0 15 5 6 7 8 9 5 6 RF FREQUENCY (GHz) 7 8 9 RF FREQUENCY (GHz) Conversion Gain, LSB vs. Control Voltage Input IP3, LSB vs. Control Voltage 25 30 5 GHz 6 GHz 7 GHz 8 GHz 20 15 5 GHz 6 GHz 7 GHz 8 GHz 25 IP3 (dBm) CONVERSION GAIN (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 16 10 5 0 20 15 -5 -10 10 -2 -1.6 -1.2 -0.8 VCTRL (V) 3 -0.4 0 -2 -1.6 -1.2 -0.8 -0.4 0 VCTRL (V) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90 Hybrid, IF = 2000 MHz LO/RF Rejection, LSB Isolation 40 +25 C +85 C -40 C 30 -5 ISOLATION (dB) LO/RF REJECTION (dBc) 35 25 20 15 10 -10 LO/IF1 LO/IF2 -15 5 0 -20 5 6 7 8 FREQUENCY (GHz) 9 5 6 7 8 9 FREQUENCY (GHz) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 0 [1] Data taken without external IF 90 hybrid For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90 Hybrid, IF = 3000 MHz 20 20 CONVERSION GAIN (dB) CONVERSION GAIN (dB) 25 15 10 +25 C +85 C -40 C 5 0 dBm -3 dBm 15 10 5 0 5 6 7 8 9 5 6 RF FREQUENCY (GHz) 8 9 Input P1dB, LSB vs. Temperature 0 16 14 +25 C +85 C -40 C -10 +25 C +85 C -40 C 12 P1dB (dBm) SIDE BAND REJECTION (dBc) 7 RF FREQUENCY (GHz) Sideband Rejection vs. Temperature -20 -30 10 8 6 4 -40 2 -50 0 5 6 7 8 9 5 6 RF FREQUENCY (GHz) 7 8 9 RF FREQUENCY (GHz) Input IP3, LSB vs. Temperature Output P1dB, LSB vs. Temperature 30 22 25 20 20 IP3 (dBm) 24 18 +25 C +85 C -40 C 16 +25 C +85 C -40 C 15 10 14 5 12 0 5 6 7 RF FREQUENCY (GHz) 5 Conversion Gain, LSB vs. LO Drive 25 0 P1dB (dBm) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Conversion Gain, LSB vs. Temperature 8 9 5 6 7 8 9 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90 Hybrid, IF = 3000 MHz Conversion Gain, LSB vs. Control Voltage Output IP3, LSB vs. Temperature CONVERSION GAIN (dB) IP3 (dBm) 5 GHz 6 GHz 7 GHz 8 GHz 20 +25 C +85 C -40 C 35 30 25 20 15 10 5 0 -5 -10 15 5 6 7 8 -2 9 -1.6 -1.2 -0.8 -0.4 0 2 3 4 VCTRL (V) RF FREQUENCY (GHz) Input IP3, LSB vs. Control Voltage 30 5 GHz 6 GHz 7 GHz 8 GHz IP3 (dBm) 25 20 15 10 -2 -1.6 -1.2 -0.8 -0.4 0 VCTRL (V) MxN Spurious Outputs [1][2] MxN Spurious Outputs [1][2] nLO mIF 0 1 2 nLO 3 4 mIF 0 1 0 x -23.5 -24.1 -54.1 -60.1 0 X -16.4 -21.4 -55.4 -67.6 -1 -70.1 0 -38.1 -42.1 -76.1 -1 -54.4 0 -34.4 -51.4 -73.4 -2 -34.1 -56.1 -33.1 -65.1 -67.1 -2 -36.4 -45.4 -37.44 -62.4 -71.4 -3 69.1 -58.1 -84.1 -58.1 -85.1 -3 -73.1 -51.4 -68.4 -57.4 -83.4 -4 -69.1 -109.1 -74.1 -95.1 -74.1 -4 -85.4 -100.4 -82.4 -83.4 -82.4 IF = 2 GHz @ -6 dBm IF = 2 GHz @ -6 dBm LO = 8.5 GHz @ 0 dBm LO = 10.1 GHz @ 0 dBm MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 25 40 [1] Data taken without external IF 90 hybrid [2] All values in dBc below RF power level (LO - IF) lSB For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Absolute Maximum Ratings IF Input +20 dBm LO Input +10 dBm Channel Temperature 175 C Continuous Pdiss (T = 85C) (derate 18.3 mW/C above 85C) 1.65 W Thermal Resistance (channel to ground paddle) 54.6 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1.. PACKAGE BODY MATERIAL: ALUMINA 2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3.. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND Package Information Part Number Package Body Material Lead Finish HMC925LC5 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H925 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX 7 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Pin Descriptions Function Description 1 - 4, 6, 9 - 11, 16, 17, 19, 20, 22, 24, 25, 32 N/C No connection required. The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 5 Vdd1 Power supply voltage for LO amplifier. See application circuit for required external components. 7 LOIN This pin is AC coupled and matched to 50 Ohms. 8, 13, 15, 27, 29, 31 GND These pins and package bottom must be connected to RF/DC ground. 12 Vgg Gate control for RF amplifier, please follow "MMIC Amplifier Biasing Procedure" application note. See application circuit for required external components. 14 RFOUT This pin is AC coupled and matched to 50 Ohms. 18, 21, 23 Vdd4, Vdd3, Vdd2 Power supply voltage for RF amplifier. See application circuit for required external components. 26 Vctrl Gain Control Voltage for RF Amplifier 28 IF1 30 IF2 Differential IF input pins. For applications not requiring operation to DC, an off chip DC blocking capacitor should be used. For operation to DC this pin must not source/sink more than 3mA of current or part non function and possible part failure will result. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Pin Number 8 HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Typical Application 9 C1-C4, C13, C16 100 pF Capacitor, 0402 Pkg. C5 - C8, C14, C17 1000 pF Capacitor, 0603 Pkg. C9 - C12, C15, C18 2.2 F Capacitor, Case A Pkg. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC925LC5 v02.0614 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz List of Materials for Evaluation PCB 131092 [1] Item Description J1, J2 SMA Connector J3, J4 K-Connector SRI J5, J6, J8, J9 DC Pins C1 - C4, C13, C16 100 pF Capacitor, 0402 Pkg. C5 - C8, C14, C17 1000 pF Capacitor, 0603 Pkg. C9 - C12, C15, C18 2.2 F Capacitor, Case A U1 HMC925LC5 Upconverter PCB [2] 125487 Evaluation Board The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR, FR4 or Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC925LC5TR 131092-HMC925LC5 HMC925LC5 HMC925LC5TR-R5