–Carbon resistive element.
–IP54 protection according to IEC 60529.
–Polyester substrate.
–Also upon request:
•Wiper positioned at initial, 50% or fully clockwise.
•Supplied in magazines for automatic insertion.
•Long life model (10K cycles).
FEATURES
PT-6
6 mm Carbon
Potentiometer
•Housing available in self extinguishable plastic
(UL94V0).
www.piher.net
–SMD version available (see PS-6 datasheet).
•Mechanical detents.
–Range of values*
–Max. Voltage: 100 VDC (lin), 50 VDC (no lin)
–Nominal Power 50°C (122°F) (see power rating curve)
0.1 W (lin) 0.05 W (no lin)
–Operating Temperature**: -25°C +70°C (-13°F +158°F)
* Others check availability.
–Taper*: Lin; Log; Alog (Log & Alog. only Rn 1K)
–Stop torque: > 4 Ncm. (> 5.6 in-oz)
–Torque: 0.2 to 2 Ncm.
(0.3 to 2.7 in-oz)
–Electrical Rotation angle: 200° ± 20°
–Mechanical Rotation angle: 235° ± 5°
–Life*: Up to 10K cycles
ELECTRICAL SPECIFICATIONS
Online product configurator: https://piher.net/configurator/2017/08/24/pt6-6-configurator-potentiometer/
** Up to 85°C depending on application.
–Equivalent Noise Resistance:
36
–Standard tolerance*: ± 20%
± 30%
–Residual resistance*:
MECHANICAL SPECIFICATIONS
NOTES:
HOW TO ORDER
2020
Tolerance
3030 =
±
30%
2020 =
±
20%
1010 =
±
10%
0505 =
±
5%
(See note 3)
V
Mounting method
H=Horizontal adjust
V=Vertical adjust
K
Rotors
K
M
W
X
(See note 1)
PT-6
Series
PT-6
A
Taper
A = Lin.
B = Log.
C = Alog.
221
(See note 2)
Value
000 = CM
Magazines
T
(See note 5)
Life
E= Long life
(See note 4)
Wiper position
PM = 50%
PF = Final position
Crimping
SC = Not crimped
RO = Red
NE = Black
VE = Green
AZ = Blue
GR = Grey
(See note 6)
(3) Tolerance (non standard, custom): check availability............
Negative tolerance
Positive tolerance
Code eg.: 07 05
=
+ 7
– 5
000 = CM = switch version (contact us)
–
(2) Value: Code: 22 1=
Number of zeros
First two digits.
–
Shaft/knob
- = Fig. 1
02 = Fig. 2
03 = Fig. 3
6172 = arrow
(1) «X» is only available with horizontal adjusting method.
Adjust. type:
(4) Life: • Standard = 1000 cycles • Long = 10K cycles (non-detented models)
Potentiometer without knob or shaft, only the rotor. Potentiometer with knob or shaft, only the knob/shaft.
Default colour for knob/shaft is cream. Shaft only available in cream or black colour.
(6)
(5) Only for “V” mounting method. “W” rotor with shaft Fig. 2 is not available in maganizes .
OPTIONAL EXTRAS
Knob/shaft/rotor
colour
Detents
P04
P06
P08
P10
www.piher.net
Mechanical life 1000 cycles..............................
PT-6 KV + DRAWING NUMBER (Max. 16 characters)
This way of ordering should be used for options which are not included
in the "How to order" standard and optional extras.
STANDARD OPTIONS
HOW TO ORDER CUSTOM DRAWING
Packing Bulk.........................................
Rotor colour White..................................
Wiper position Initial...............................
Crimping Yes.........................................
Knob colour White............................
OPTIONS
DETAIL A
MOUNTING METHODS. VARIATIONS
TAPERS
A = Linear
B = Log.
C = Alog.
Special Function
SPDT. function
V = Horizontal mounting / Vertical adjust
H = Vertical mounting / Horizontal adjust
ROTORS
With inserted
knob / shaft
. Default knob is ref. 5155
X = Adjustable from collector side
K
Cross slot thru hole M
Hexagonal thru hole Upon request
37
45°
50% ±35°
INITIAL
CCW FINAL
CW
Positioning
Std. Position = CCW
A
Collector 0.30
X
Terminals 0.25
1.6
3.3
X
0.8
A E
A
S
2.5 2.5
2.5 2.5
2.5
0.9
+0.1
0.7
6.3
+0.1
3.3
3.
5
7.3
43.3
±0.1
1.8
0.6
2.5 2.5
2.5 2.5
±0.05
A
±0.1
1.8
0.6
0.7
+0.1
0.9
2.5
5
5
4.5
6.3
+0.1
3.3
+0.1
3.
5
2.5
±0.05
0.65
1.85
+0.07
±0.05
-0.03
1.4
±0.05
0.6
1.8
±0.1
±0.1
A
B
C
0.7
0.6
1.8
±0.1
±0.05
A
6
4.3
2.5
0.7
A
W = Adjustable from terminal side
±0.
1
1.8
0.6
6
4.3
2.5
±0.05
Wipers are shown positioned at 50% for the picture
www.piher.net
P08
P06P04
P10
Relative detent positions
along the total mechanical
travel.
Examples of custom configurations.
If you wish to use your own custom plastic shaft/knob/actuator please contact Piher for advice about compatible materials.
KNOBS
Detent torque can vary from 1.2 to 2.5 times the standard
potentiometer torque.
Long life versions are available under request and have the
following characteristics at Tª:
- Potentiometers with 1 to 3 detents: up to 10K cycles.
- Potentiometers with 4 and more detents: up to 5K cycles.
Others check availability.
Unless otherwise specified the
detents are evenly spaced (using the end points as
reference).
For more than 10 detents versions please contact your
nearest PIHER authorised distributor.
NOTES FOR DETENTED VERSIONS:
Standard mechanical life: 100 cycles.
All detented versions will be studied case by case.
Contact Piher for leadtimes and availability.
Magazines for PT-6 V with or without crimp.
9.5
8
530
AUTOMATIC INSERTION
Magazines
80 Pieces
Units per magazine
BOXES
All
Model
1.000
PT-6 V & PT-6 WV
(2)
(4)
(5)
(3)
(1)
For PT-6 dual
gang version
contact your
nearest PIHER
supplier
PACKAGING PT-6 DUAL GANG VERSION
Ref.: 6060
Ref.: 5155 / Fig. 1 Ref.: 5141 / Fig. 3
SMD / SMT version available:
See N-6 and PS(x)-6 product datasheets at: www.piher.net
38
4
3.3
7.5
0.3
0.25
44.35
4.40
8.35
Magazines for PT-6 WV with or without crimp.
530
13
8
5
2.5
5
17.5
6.3
4.3
2.54
R 1
0.64
6
1.87
2.2
1.2
6.3
4.3
3.4
2.35
0.8
6
2.2
1.2
1.87
R 1
0.7
3.5
NOT-CRIMPED TERMINALS DIMENSIONS
STANDARD DETENT CONFIGURATIONS
SMD VERSION
Units
Colour: grey. For other colours check availability.
Default knob. Standard colour: white.
SHAFT / KNOB
Ref.: 6132 / Fig. 2
39
TYPICAL VARIATIONS
NOTE: Out of range values may not comply with these results.
ELECTRICAL LIFE
MECHANICAL LIFE (CYCLES)
TEMPERATURE COEFFICIENT
THERMAL CYCLING
DAMP HEAT
VIBRATION (for each plane X,Y,Z)
TESTS
±5 %
±4 % (Rn < 1 M )
±300 ppm (Rn < 100 K)
±2.5 %
±5 %
±2 %
1.000 h. @ 50°C: 0.1 W
1000 @ 10 CPM ...15 CPM
–25°C; +70°C
16 h. @ 85°C; 2h. @ –25°C
500 h. @ 40°C @ 95% HR
2 h. @ 10 Hz. ... 55 Hz.
POWER RATING CURVE
W(%)
100
%
40
%
50° 70° °C
6.3
2.6
3.8 6
3.3
2.2
13.30
10
51.50
2.90
2
5
1
0.8
Piher Sensors & Controls SA
Polígono Industrial Municipal
Vial T2, 22,
31500 Tudela - Spain.
t. +34-948-820450
f. +34-948-824050
sales@piher.net
www.piher.net
Piher potentiometer’s recommended
connection circuit for a position sensor or
control application.
(voltage divider circuit electronic design).
RECOMMENDED CONNECTIONS
RAD
RL
RL 100 x R
VCC
C
Noise filter.
Ground.
E
A
S
Ref.: 6172
Colour: grey. For other colours check availability. Shaft. Not suitable for magazine packaging
Disclaimer
The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate
design information.
Piher Sensors & Controls S.A., its affiliates, agent s, and employees, and all persons acting on its or their behalf (collectively,
“Piher”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure
relating to any product described herein.
Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information
provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify
Piher’s terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products.
No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or
by any conduct of Piher.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so
entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale.
Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Information contained in and/or attached to this catalogue may be subject to export control regulations of the European
Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer
of any information contained in this document complies with all relevant export control regulations. If you are in any doubt
about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher
International Corp. Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United
States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited.
Piher is an AmphenolTM company.
Pb
A
c
c
o
r
d
i
n
g
t
o
E
L
V
(
2
0
0
0
/
5
3
/
E
C
)
/
R
o
H
S
3
(
2
0
1
5
/
8
6
3
/
E
U
)
Note: Piher products can be adapted to meet customer’s requirements.
Due to continuous process improvement, specifications are subject to change without notice.
v160518
Contact
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Piher:
PT6KV224A2020 PT6KV-105A2020 PT6KH-103A2020 PT6KH2.5 4.7KA PT6KV2.5 4.7KA PT6WH(2.5) 20KA 20%
PT6KV101A2020 PT6KH2.5 1MA PT6KH2.5 1KA PT6KV-201A2020 PT6KH2.5 220KA PT6KH2.5 100KA
PT6KV333A2020 PT6KV-501A2020 PT6KH2.5 47KA PT6KH254A2020 PT6KH-03627 PT6KH203A2020
PT6KH221A2020 PT6KH501A2020 PT6KV-103A2020 PT6KV-252A2020 PT6KV-104A2020 PT6KV-504A2020
PT6KV-473A2020 PT6KV-202A2020 PT6KV-102A2020 PT6KV-253A2020 PT6KV-203A2020 PT6KV-502A2020
PT6KV-503A2020 PT-6WH253A2020 PT-6WH503A2020 PT-6WH502A2020 PT-6MV103A2020E PT6KH503A2020
PT6KH-105A2020 PT6KH-102A2020 PT6KH-472A2020 PT6KV-472A2020 PT6KH-104A2020 XBOPL5155IN
PT6WH-203A2020-S PT6KV-472A2020-P06 PT6KH-255A3030 PT6MV-474A2020 PT6KH-504A2020-PM PT6MH-
105A2020 PT6KV-475A3030 PT6KH-103A2020-PM PT6KH-103A2020-P05 PT6MV-105A2020-PM PT6KV-
505A3030 PT6KH-503A2020-PM PT6WV-471A2020 PT6KH-103A2020-P04 PT6MV-103A2020 PT6KH-253A2020
PT6KV-104A2020-PM PT6KV-103A2020-PM PT6KH-504B2020 PT6MV-104B2020 PT6KV-104A2020-P06 PT6MV-
503A2020-PM PT6KV-474A2020 PT6KV-223A2020 PT6KV-503A1010 PT6KV-253A2020-PM PT6KV-105A2020-P08
PT6KV-104A2020-P04 PT6KH-104A1010-PM PT6KH-105A1010 PT6KV-502A2020-PM PT6KV-473A2020-E
