https://www.phoenixcontact.com/us/products/2801242
09/10/2014Page2/5
Type 1/2 surge protection plug-VAL-MS-T1/T2 48/12.5 ST-2801242
Technical data
General
Number of positions 1
Surge protection fault message Optical
Direction of action L-N / L-PEN
Protective circuit
IEC test classification I / II
T1 / T2
EN type T1 / T2
Nominal voltage UN60 V AC
60 V DC
- 48 V DC (RRH)
Maximum continuous operating voltage UC75 V AC
100 V DC
UT (TOV-proof) 100 V AC (5 s)
130 V DC (5 s)
Nominal frequency fN50 Hz (60 Hz)
Residual current IPE ≤ 0.6 mA
Standby power consumption PC≤ 90 mVA
Max. discharge current Imax (8/20) µs 30 kA
Nominal discharge current In (8/20) µs 12.5 kA
Impulse discharge current (10/350)µs charge 6.25 As
Impulse discharge current (10/350)˽µs, specific energy 39 kJ/Ω
Impulse discharge current (10/350)˽µs, peak value limp 12.5 kA
Voltage protection level Up≤ 0.4 kV
Voltage protection level Up (L+) - (L-) ≤ 0.4 kV
Voltage protection level Up (L+/L-) - PE ≤ 0.4 kV
Residual voltage ≤ 0.4 kV
≤ 0.35 kV (at 10 kA)
≤ 0.3 kV (at 5 kA)
≤ 0.25 kV (at 3 kA)
Residual voltage (L+) - (L-) ≤ 0.4 kV
Residual voltage (L+/L-) - PE ≤ 0.4 kV
Response time ≤ 25 ns
Max. backup fuse with branch wiring 160 A (gL/gG)
Short-circuit resistance IP with max. backup fuse (effective) 25 kA
Standards and Regulations
Standards/regulations IEC 61643-11 2011