55PC0213-10-9 - TE Connectivity / Raychem

Users should evaluate the suitability of this product for their application. Specications are subject to change without notice.

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED

TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Page 1 of 2

The TE logo, Tyco Electronics and Raychem are trademarks. Raychem Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800

Phone: 1-800-227-8816

Fax: 1-650-361-6297

DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

CONDUCTOR - NICKEL-COATED COPPER INSULATION - RADIATION - CROSSLINKED,

MODIFIED ETFE

TITLE SPECIFICATION CONTROL DRAWING 55PC0213

WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, MEDIUM WEIGHT, GENERAL PURPOSE, 600 VOLT 2-1-10 F

This specication sheet forms a part of the latest issue of Raychem Specication 55PC.

Date Revision

CONSTRUCTION DETAILS

PART

NUMBER

WIRE

SIZE

(AWG)

CONDUCTOR

STRANDING

(number x AWG)

CONDUCTOR DIAMETER

(in.)

FINISHED WIRE

MAXIMUM

RESISTANCE

AT 20°C

(ohms/1000 ft.)

DIAMETER

(in.)

WEIGHT

(lbs/1000 ft.)

LOWER

SPEC

LIMIT

TARGET

VALUE

UPPER

SPEC

LIMIT

LOWER

SPEC

LIMIT

TARGET

VALUE

UPPER

SPEC

LIMIT

TARGET

VALUE

UPPER

SPEC

LIMIT

55PC0213-26-* 26 19 x 38 .0175 .0183 .0191 42.2 .0328 .0345 .0362 1.38 1.52

55PC0213-24-* 24 19 x 36 .0225 .0233 .0241 25.9 .0378 .0395 .0412 1.98 2.13

55PC0213-22-* 22 19 x 34 .0285 .0293 .0301 16.0 .0438 .0455 .0472 2.90 3.06

55PC0213-20-* 20 19 x 32 .0365 .0375 .0385 9.77 .0523 .0540 .0557 4.38 4.57

55PC0213-18-* 18 19 x 30 .0452 .0464 .0476 6.10 .0616 .0635 .0654 6.59 6.90

55PC0213-16-* 16 19 x 29 .0514 .0527 .0538 4.76 .0690 .0710 .0730 8.37 8.70

55PC0213-14-* 14 19 x 27 .0644 .0659 .0674 3.00 .0838 .0860 .0882 12.88 13.33

55PC0213-12-* 12 37 x 28 .0825 .0845 .0865 1.98 .1020 .1047 .1074 19.73 20.30

55PC0213-10-* 10 37 x 26 .1050 .1070 .1090 1.24 .1252 .1290 .1328 31.12 32.13

55PC0213-8-* 8 133 x 29 .158 .163 .169 .694 .188 .196 .203 56.8 59.9

55PC0213-6-* 6 133 x 27 .198 .205 .212 .436 .233 .242 .251 89.7 94.7

55PC0213-4-* 4 133 x 25 .250 .260 .268 .275 .300 .311 .322 146. 154.

55PC0213-2-* 2 665 x 30 .320 .330 .340 .177 .370 .383 .397 227. 240.

55PC0213-1-* 1817 x 30 .360 .370 .380 .144 .410 .424 .438 278. 291.

55PC0213-0-* 01045 x 30 .395 .415 .425 .113 .449 .466 .483 343. 366.

55PC0213-00-* 00 1330 x 30 .440 .462 .475 .089 .505 .525 .545 450. 481.

WIRE RATINGS AND ADDITIONAL REQUIREMENTS

Revision

SPECIFICATION CONTROL DRAWING Page 2 of 2 F 55PC0213

SCD

TEMPERATURE RATING: 200°C

Maximum continuous conductor temperature

VOLTAGE RATING: 600 volts (rms) at sea level

COLOR: White preferred

CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour

IDENTIFICATION AND COLOR STRIPING DURABILITY:

125 cycles (250 strokes) (minimum). 500 g weight.

INSULATION ELONGATION AND TENSILE STRENGTH:

Total Insulation,

Elongation, 50% (minimum)

Tensile Strength, 5000 lbf/in² (minimum)

INSULATION FLAWS:

Spark Test, 3.0 kV (rms)

Impulse Dielectric Test, 8.0 kV (peak)

INSULATION THICKNESS: .008 in. (nominal) total insulation

SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 inch (maximum) in 12 inches.

VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms)

PART NUMBER:

The “*” in the part numbers on page 1 shall be replaced by a color code designator,

1/ Example: AWG 22, white: 55PC0213-22-9

AWG 22, white with black stripe: 55PC0213-22-90

1/ See footer section on page 1