GE Sensing Features Applications * Solid state reliability * Industrial automation * 0.1% accuracy * Air flow monitors * PCB mountable package * Process control * DIP package * Medical equipment * Individual device traceability * Underground cable leak detection NPC-410 Series NovaSensor Medium Pressure Sensors NPC-410 Series is a NovaSensor product. NovaSensor has joined other GE high-technology sensing businesses under a new name-- GE Industrial, Sensing. g GE Sensing NPC-410 Specifications 2 3 4 Description 8 Connection -In +Out +In -Out No Connection -In -In -In 0.60 in (15.24 mm) 0.15 in (3.8 mm) 0.1 in (2.54 mm) 8 7 6 5 0.5 in (12.7 mm) G6 1 2 34 0.92 in (23.4 mm) 0.12 in (3.05 mm) 0.37 in (9.4 mm) Used for positive differential Not used for absolute Pressure Ranges 0.12 in (3.04 mm) 0.002 two tubes Not used for gauge (1) Ceramic substrate Value Units Notes -40 to 257 -67F to 302 F F (-40C to 125C) (-55C to 150C) 0.005 lb (2.5 g) 0.34 in (8.6 mm) 0.165 in (4.2 mm) 8X 0.02in (0.51 mm) 1. Tube length; L = 0.490, S=0.325, N = No tube. 2. Lead pins can be either be in the same or the opposite direction of the pressure tube. Option (1) has the leads in the "Up" position, the same direction as the tube. Option (3) has the leads in the "Down" position, the opposite direction of the tube. NPC-410 Series package diagram Compatible with exposed materials Dry gases only (3) 8X 0.17 in (4.32 mm) * Gauge and Differential: 5, 15, 30, 50 and 100 psi (0.34, 1, 2, 3.4 and 7 bar) * Absolute: 15, 30, 50 and 100 psi (1.03, 2.06, 6.89 bar) Parameter Environmental Temperature Range Operating(9) Storage Mechanical Weight Media Compatibility Positive differential and gage ports Absolute and negative differential ports -Out Lead 1 2 3 4 5,6,7 8 NPC-410 Series schematic diagram L, S (See Notes) The NPC-410 Series is based on NovaSensor's advanced SenStable(R) piezoresistive sensing technology. The latest techniques in silicon micromachining have been used to ion implant piezoresistive strain gages into a Wheatstone bridge configuration, which is integrally formed on a micromachined diaphragm. Constant current or constant voltage can be used for sensor excitation. Offset and sensitivity temperature compensation and calibration can be achieved by adding external resistors. Additionally, the NPC-410 series is available in pressure ranges from 0 psi to 5 psi (0 bar to 0.34 bar) through 0 psi to 100 psi (0 bar to 7 bar). Please contact the GE for other pressure ranges. 1 0.6 in (15.24 mm) The NPC-410 Series of solid state pressure sensors are designed to provide a cost effective solution for applications that require long-term stability and high volume. Packaged in a dual-in-line configuration, the NPC-410 Series is intended for printed circuit board mounting. Optional pressure port and lead configurations give superior flexibility in low profile applications where pressure connection orientation is critical. +Out +In 6 GE Sensing Ordering Information NPC-410 Specifications Parameter Performance Parameters(1) Full Scale Output (FSO) Zero Pressure Output Linearity Pressure Hysteresis Input and Output Impedance Thermal Accuracy-Span Thermal Accuracy-Zero Temperature Coefficient-Resistance Thermal Hysteresis-Zero Pressure Overload Units Minimum Type Maximum Notes mV mV %FSO %FSO %FSO %FSO %/C 105 -50 -- -- 2500 -- -- -- 125 0 -- -- 4000 1.5 0.5 0.3 155 50 0.1 0.1 6000 -- -- -- %FSO Rated -- -- 0.1 -- -- 3X 2 3, 7 2,4 2,4 4 4 5 *1. Ambient temperature = 77F (25C), unless otherwise noted. Supply current = 1.5 mA. 2. External resistors can be added to reduce temperature errors and calibrate the offset and FSO. 3. Best fit straight line. 4. Temperature range 32F to 140F (0C to 60C), reference to 77F (25C). 5. 3X or 200 psi (13.78 bar) maximum, whichever is less. 6. Exposed materials are pyrex, ceramic, silicon, epoxy, RTV and stainless steel. 7. 5 psi (0.34 bar) specifications: Linearity: 0.25 %FSO. The code number to be ordered may be specified as follows: NPC-410 Code Pressure Ranges 005 015 030 050 100 Code Type A Absolute G Gauge D Differential Code Lead Configuration 1 Up 3 Down Code Tube Options L Long S Short N None NPC-410 - ___ - ___ - ___ - ___ Typical model number GE Sensing g (c)2006 GE. All rights reserved. 920-277A All specifications are subject to change for product improvement without notice. GE(R) is a registered trademark of General Electric Co. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE. www.gesensing.com