HAF2012(L), HAF2012(S) Silicon N Channel MOS FET Series Power Switching REJ03G1139-0300 (Previous: ADE-208-677A) Rev.3.00 Sep 07, 2005 Description This FET has the over temperature shut-down capability sensing to the junction temperature. This FET has the built-in over temperature shut-down circuit in the gate area. And this circuit operation to shut-down the gate voltage in case of high junction temperature like applying over power consumption, over current etc. Features * * * * Logic level operation (4 to 6 V Gate drive) High endurance capability against to the short circuit Built-in the over temperature shut-down circuit Latch type shut-down operation (Need 0 voltage recovery) Outline RENESAS Package code: PRSS0004AE-A (Package name: LDPAK (L) ) RENESAS Package code: PRSS0004AE-B (Package name: LDPAK (S)-(1) ) 4 4 1 1 2 D 3 Gate resistor G Temperature Sensing Circuit Latch Circuit Gate Shutdown Circuit S Rev.3.00 Sep 07, 2005 page 1 of 9 1. Gate 2. Drain 3. Source 4. Drain 2 3 HAF2012(L), HAF2012(S) Absolute Maximum Ratings (Ta = 25C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Channel dissipation Channel temperature Storage temperature Symbol VDSS Value 60 Unit V VGSS VGSS 16 -2.8 V V ID Note 1 ID (pulse) 20 40 A A IDR Note 2 Pch 20 50 A W Tch Tstg 150 -55 to +150 C C Notes: 1. PW 10 s, duty cycle 1% 2. Value at Ta = 25C Typical Operation Characteristics Item Input voltage Input current (Gate non shut down) Input current (Gate shut down) Shut down temperature Gate operation voltage Rev.3.00 Sep 07, 2005 page 2 of 9 Symbol VIH Min 3.5 Typ -- Max -- Unit V Test Conditions VIL IIH1 -- -- -- -- 1.2 100 V A Vi = 8 V, VDS = 0 IIH2 IIL -- -- -- -- 50 1 A A Vi = 3.5 V, VDS = 0 Vi = 1.2 V, VDS = 0 IIH (sd) 1 IIH (sd) 2 -- -- 0.8 0.35 -- -- mA mA Vi = 8 V, VDS = 0 Vi = 3.5 V, VDS = 0 Tsd VOP -- 3.5 175 -- -- 13 C V Channel temperature HAF2012(L), HAF2012(S) Electrical Characteristics (Ta = 25C) Item Drain current Symbol ID1 Min 10 Typ -- Max -- Unit A Test Conditions VGS = 3.5 V, VDS = 2 V ID2 -- -- 10 -- mA V VGS = 1.2 V, VDS = 2 V ID = 10 mA, VGS = 0 Drain to source breakdown voltage V (BR) DSS -- 60 Gate to source breakdown voltage V (BR) GSS V (BR) GSS 16 -2.8 -- -- -- -- V V IG = 100 A, VDS = 0 IG = -100 A, VDS = 0 IGSS1 IGSS2 -- -- -- -- 100 50 A A VGS = 8 V, VDS = 0 VGS = 3.5 V, VDS = 0 IGSS3 IGSS4 -- -- -- -- 1 -100 A A VGS = 1.2 V, VDS = 0 VGS = -2.4 V, VDS = 0 Input current (shut down) IGS (op) 1 IGS (op) 2 -- -- 0.8 0.35 -- -- mA mA VGS = 8 V, VDS = 0 VGS = 3.5 V, VDS = 0 Zero gate voltage drain current Gate to source cutoff voltage IDSS VGS (off) -- 1.0 -- -- 250 2.25 A V VDS = 50 V, VGS = 0 ID = 1 mA, VDS = 10 V Static drain to source on state resistance RDS (on) RDS (on) -- -- 50 30 65 43 m m ID = 10 A, VGS = 4 V Note 3 ID = 10 A, VGS = 10 V Forward transfer admittance Output capacitance |yfs| Coss 6 -- 12 630 -- -- S pF Turn-on delay time td (on) -- 7.5 -- s Rise time Turn-off delay time tr td (off) -- -- 29 34 -- -- s s ID = 10 A, VDS = 10 V VDS = 10 V, VGS = 0 f = 1 MHz ID = 5 A VGS = 5 V RL = 6 Fall time Body-drain diode forward voltage tf VDF -- -- 26 1.0 -- -- s V trr -- 110 -- ns tos1 -- 1.8 -- ms IF = 20 A, VGS = 0 diF/dt = 50 A/s VGS = 5 V, VDD = 12 V tos2 -- 0.7 -- ms VGS = 5 V, VDD = 24 V Gate to source leak current Body-drain diode reverse recovery time Over load shut down operation time Note4 Notes: 3. Pulse test 4. Including the junction temperature rise of the over loaded condition. Rev.3.00 Sep 07, 2005 page 3 of 9 Note 3 Note 3 IF = 20 A, VGS = 0 HAF2012(L), HAF2012(S) Main Characteristics Power vs. Temperature Derating Maximum Safe Operation Area 500 60 40 20 0 0 50 100 150 Case Temperature ID (A) Thermal shut down 200 Operation area 100 Drain Current Channel Dissipation Pch (W) 80 20 20 s 50 10 DC 10 5 er Tc (C) m c= 10 s s s 25 C ) 50 100 20 VDS (V) ID (A) VDS = 10 V Pulse Test 3.5 V 20 VGS = 3 V 10 0 0 2 4 6 Drain to Source Voltage 8 1.6 ID = 20 A 0.4 10 A 5A 0 2 4 6 Gate to Source Voltage Rev.3.00 Sep 07, 2005 page 4 of 9 8 10 VGS (V) 0 1 2 3 4 Gate to Source Voltage 5 VGS (V) Static Drain to Source on State Resistance vs. Drain Current Drain to Source on State Resistance RDS (on) () Pulse Test 75C 10 VDS (V) 0.8 Tc = -25C 25C 20 0 10 Drain to Source Saturation Voltage vs. Gate to Source Voltage 0 40 30 4V Drain Current ID (A) 30 Drain Current 5 (T 0 Typical Transfer Characteristics 5V VDS (on) (V) 10 Drain to Source Voltage Pulse Test 10 V 8V 6V 40 Drain to Source Voltage = at ion m 50 50 1.2 1 2 Operation in this area is limited by RDS (on) 1 Typical Output Characteristics 2.0 Op 0.5 Ta = 25C 0.3 0.3 0.5 1 2 200 PW 0.5 Pulse Test 0.2 0.1 VGS = 4 V 0.05 10 V 0.02 0.01 1 2 5 10 20 Drain Current 50 100 200 ID (A) Static Drain to Source on State Resistance vs. Temperature 0.10 Pulse Test ID = 20 A 0.08 VGS = 4 V 10 A 0.06 5A 0.04 ID = 20 A 5 A, 10 A 0.02 10 V 0 -40 0 40 80 Case Temperature 120 160 Forward Transfer Admittance vs. Drain Current Forward Transfer Admittance |yfs| (S) Static Drain to Source on State Resistance RDS (on) () HAF2012(L), HAF2012(S) 100 VDS = 10 V Pulse Test 50 20 Tc = -25C 10 25C 5 75C 2 1 0.5 Tc (C) 500 50 Switching Time t (ns) Reverse Recovery Time trr (ns) 100 200 100 50 di / dt = 50 A / s VGS = 0, Ta = 25C 1 2 5 10 Reverse Drain Current 20 10 20 50 td(off) tf 20 tr td(on) 10 5 2 1 0.1 0.2 50 IDR (A) VGS = 5 V, VDD = 30 V PW = 300 s, duty 1 % 0.5 1 2 5 Drain Current 10 20 50 ID (A) Typical Capacitance vs. Drain to Source Voltage Reverse Drain Current vs. Source to Drain Voltage 50 10000 Pulse Test 40 Capacitance C (pF) Reverse Drain Current IDR (A) 5 Switching Characteristics 1000 10 0.5 2 Drain Current ID (A) Body-Drain Diode Reverse Recovery Time 20 1 30 VGS = 5 V 20 0V 10 3000 1000 Coss 300 100 30 0 VGS = 0 f = 1 MHz 10 0 0.4 0.8 1.2 1.6 2.0 Source to Drain Voltage VSD (V) Rev.3.00 Sep 07, 2005 page 5 of 9 0 10 20 30 40 50 Drain to Source Voltage VDS (V) HAF2012(L), HAF2012(S) Shutdown Case Temperature vs. Gate to Source Voltage Shutdown Case Temperature Tc (C) Gate to Source Voltage VGS (V) Gate to Source Voltage vs. Shutdown Time of Load-Short Test 10 VDD = 36 V 8 24 V 12 V 6 9V 4 2 0 0.1 0.2 0.5 1 2 5 10 20 50 100 200 ID = 5 A 180 160 140 120 100 0 Shutdown Time of Load-Short Test PW (ms) 2 4 6 Gate to Source Voltage 8 VGS (V) TTL Drive Characteristics 10 Input Voltage VI (V) 8 0.8 6 0.6 VI 0.4 4 II 2 0 0.01 0.03 0.2 Input Current II (mA) 1.0 ID = 5 A 0 0.1 0.3 1 3 10 Gate Series Resistance RG (k) Normalized Transient Thermal Impedance s (t) Normalized Transient Thermal Impedance vs. Pulse Width 3 Tc = 25C 1 D=1 0.5 0.3 0.2 ch - c (t) = s (t) * ch - c ch - c = 2.50C/W, Tc = 25C 0.1 0.1 0.05 0.03 0 1 0.0 h 1s D= PDM .02 p ot uls 0.01 10 e 100 10 m 100 m Pulse Width PW (S) Rev.3.00 Sep 07, 2005 page 6 of 9 PW T PW T 1m 1 10 10 HAF2012(L), HAF2012(S) Test Circuit RL 5A ID 0 II + - Rg HD74LS08 VCC =5V D.U.T VI 0 VI II 0 Thermal shut down Switching Time Test Circuit Waveform 90% Vout Monitor Vin Monitor Vin D.U.T. 10% RL Vout Vin 5V 50 VDD = 30 V 10% 90% td(on) Rev.3.00 Sep 07, 2005 page 7 of 9 10% tr 90% td(off) tf HAF2012(L), HAF2012(S) Package Dimensions JEITA Package Code RENESAS Code Package Name MASS[Typ.] PRSS0004AE-A LDPAK(L) / LDPAK(L)V 1.40g 8.6 0.3 1.3 0.15 1.3 0.2 1.37 0.2 0.76 0.1 2.54 0.5 2.54 0.5 RENESAS Code Package Name PRSS0004AE-B LDPAK(S)-(1) / LDPAK(S)-(1)V 0.4 0.1 MASS[Typ.] Unit: mm 1.30g (1.5) 10.0 Rev.3.00 Sep 07, 2005 page 8 of 9 2.54 0.5 0.4 0.1 0.3 3.0 +- 0.5 2.54 0.5 0.2 0.86 +- 0.1 7.8 7.0 2.49 0.2 0.2 0.1 +- 0.1 1.37 0.2 1.3 0.2 7.8 6.6 1.3 0.15 + 0.3 - 0.5 8.6 0.3 (1.5) (1.4) 4.44 0.2 10.2 0.3 1.7 SC-83 2.49 0.2 11.0 0.5 11.3 0.5 0.3 10.0 +- 0.5 (1.4) 4.44 0.2 10.2 0.3 0.2 0.86 +- 0.1 JEITA Package Code Unit: mm 2.2 HAF2012(L), HAF2012(S) Ordering Information Part Name Quantity Shipping Container HAF2012-90L HAF2012-90S Max: 50 pcs/sack Max: 50 pcs/sack Sack Sack HAF2012-90STL HAF2012-90STR 1000 pcs/Reel 1000 pcs/Reel Embossed tape Embossed tape Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. Rev.3.00 Sep 07, 2005 page 9 of 9 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> 2-796-3115, Fax: <82> 2-796-2145 Renesas Technology Malaysia Sdn. Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .3.0