SPEC NO: DSAD2392 REV NO: V.10A DATE: OCT/26/2012 P AGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000042
20.32mm (0.8INCH) 16 SEGMENT SINGLE
DIGIT
Part Number: PSA08-11YWA Yellow
Features
z0.8 inch character height.
zLow current operation.
zHigh contrast and light output.
zCommon cathode and common anode available.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD2392 REV NO: V.10A DATE: OCT/26/2012 P AGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000042
Selection Guide
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
Yellow (GaAsP/GaP) White Diffused
2200 5200
Common Anode, Rt.
Hand Decimal.
*900 *2000
PSA08-11YWA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Yellow 590 nm IF=20mA
λD [1] Dominant Wavelength Yellow 588 nm IF=20mA
Δλ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA
C Capacitance Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA
IR Reverse Current Yellow 10 uA VR=5V
Parameter Yellow Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAD2392 REV NO: V.10A DATE: OCT/26/2012 P AGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000042
Yellow PSA08-11YWA
SPEC NO: DSAD2392 REV NO: V.10A DATE: OCT/26/2012 P AGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000042
PACKING & LABEL SPECIFICATIONS PSA08-11YWA
SPEC NO: DSAD2392 REV NO: V.10A DATE: OCT/26/2012 P AGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000042
SPEC NO: DSAD2392 REV NO: V.10A DATE: OCT/26/2012 P AGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1311000042
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
