Optimal I Star Series 1-watt LED on MCPCB OVTLZ1LGAxx x x x x x Customized for Optek Lednium Series 1-watt device Low thermal resistance (4.9 C/W junction to heatsink) Exceptional thermal conductivity with metal core PCB Soldering points provided for electrical connections Locating slots for M3 screws Product Photo Here Emitted Color Typical Luminous Flux (lm) Typical Forward Voltage (V) @ 350mA OVTLZ1LGAB Blue 460nm 12 3.4 OVTLZ1LGAC Cyan 505nm 40 3.6 OVTLZ1LGAG Green 515nm 60 3.6 Red 625nm 45 2.3 Amber 595nm 35 2.3 OVTLZ1LGAW Cool White 7000K 65 3.4 OVTLZ1LGAWD Daylight White 5800K 60 3.4 OVTLZ1LGAWW Warm White 3500K 50 3.4 Part Number Viewing Angle OVTLZ1LGAR 135 OVTLZ1LGAA Package Dimensions Notes: RoHS Moisture x x x x x x Test conditions: IF=350mA; TJ<130C All dimensions are in inches [millimeters]. Additional thermal management required. Packaged in ESD shielded tube, 10 units per tube Two pads available for each polarity All electrical and optical characteristics of the LED remain the same as specified by the corresponding datasheet (OVTL01LGA Series). DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.5 05/08 Page 1 of 1