OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5 05/08
Page 1 of 1
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Optimal I Star Series
1-watt LED on MCPCB
OVTLZ1LGAxx
x Customized for Optek Lednium Series 1-watt device
x Low thermal resistance (4.9° C/W junction to heatsink)
x Exceptional thermal conductivity with metal core PCB
x Soldering points provided for electrical connections
x Locating slots for M3 screws
Product Photo Here
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
RoHS Moisture
Part Number Viewing Angle Emitted Color Typical Luminous
Flux (lm) Typical Forward Voltage (V)
@ 350mA
OVTLZ1LGAB
135°
Blue 460nm 12 3.4
OVTLZ1LGAG Green 515nm 60 3.6
OVTLZ1LGAR Red 625nm 45 2.3
OVTLZ1LGAA Amber 595nm 35 2.3
OVTLZ1LGAW Cool White 7000K 65 3.4
OVTLZ1LGAWD Daylight White 5800K 60 3.4
OVTLZ1LGAWW Warm White 3500K 50 3.4
OVTLZ1LGAC Cyan 505nm 40 3.6
Package Dimensions
Notes:
x Test conditions: IF=350mA; TJ<130°C
x All dimensions are in inches [millimeters].
x Additional thermal management required.
x Packaged in ESD shielded tube, 10 units per tube
x Two pads available for each polarity
x All electrical and optical characteristics of the LED remain the
same as specified by the corresponding datasheet
(OVTL01LGA Series).
