© 2000 IXYS All rights reserved 1 - 2
Features
• Package with DCB ceramic
base plate
• Isolation voltage 3000 V~
• Planar passivated chips
• Low forward voltage drop
• Leads suitable for PC board soldering
Applications
●Supply for DC power equipment
●DC motor control
Advantages
• Easy to mount with two screws
• Space and weight savings
• Improved temperature and power
cycling capability
• Small and light weight
Data according to IEC 60747 refer to a single diode/thyristor unless otherwise stated
①for resistive load at bridge output. IXYS reserves the right to change limits, test conditions and dimensions.
IdAV = 32 A
VRRM = 600-1200 V
Single Phase Rectifier Bridge
VRSM VRRM Type
VDSM VDRM
VV
700 600 VHF 25-06io7
900 800 VHF 25-08io7
1300 1200 VHF 25-12io7
VHF 25
Symbol Test Conditions Maximum Ratings
IdAV ①TC = 85°C, module 32 A
ITAVM/IFAVM TC = 85°C; (180° sine ; per thyristor) 16 A
ITSM/IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine 200 A
VR = 0 t = 8.3 ms (60 Hz), sine 210 A
TVJ = TVJM t = 10 ms (50 Hz), sine 180 A
VR = 0 t = 8.3 ms (60 Hz), sine 190 A
I2tTVJ = 45°C t = 10 ms (50 Hz), sine 200 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 150 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 160 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 150 A2s
(di/dt)cr TVJ = TVJM repetitive, IT = 20 A 100 A/ms
f =50 Hz, tP =200 ms
VD = 2/3 VDRM
IG = 0.15 A non repetitive, IT = ITAVM 500 A/ms
diG/dt = 0.15 A/ms
(dv/dt)cr TVJ = TVJM;V
DR = 2/3 VDRM 500 V/ms
RGK = ¥; method 1 (linear voltage rise)
VRGM 10 V
PGM TVJ = TVJM tp = 30 ms£5W
IT = ITAVM tp = 300 ms£2.5 W
PGAVM 0.5 W
TVJ -40...+125 °C
TVJM 125 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V~
IISOL £ 1 mA t = 1 s 3000 V~
MdMounting torque (M4) 1.5 - 2 Nm
14 - 18 lb.in.
Weight typ. 18 g
K
D
H
N
AG
002
Preliminary data
© 2000 IXYS All rights reserved 2 - 2
Dimensions in mm (1 mm = 0.0394")
Symbol Test Conditions Characteristic Values
ID, IRTVJ = TVJM; VR = VRRM; VD = VDRM £5mA
VTIT= 20 A; TVJ = 25°C£1.6 V
VT0 For power-loss calculations only (TVJ = 125°C) 0.85 V
rT27 mW
VGT VD = 6 V; TVJ = 25°C£1.5 V
TVJ = -40°C£2.5 V
IGT VD = 6 V; TVJ = 25°C£25 mA
TVJ = -40°C£50 mA
VGD TVJ = TVJM;V
D = 2/3 VDRM £0.2 V
IGD £3mA
ILTVJ = 25°C; tP = 10 ms£75 mA
IG = 0.1 A; diG/dt = 0.1 A/ms
IHTVJ = 25°C; VD = 6 V; RGK = ¥ £ 50 mA
tgd TVJ = 25°C; VD = 1/2 VDRM £2ms
IG = 0.1 A; diG/dt = 0.1 A/ms
RthJC per thyristor; DC 1.3 K/W
per module 0.22 K/W
RthJK per thyristor; DC 1.8 K/W
per module 0.3 K/W
dSCreeping distance on surface 11.2 mm
dACreepage distance in air 9.5 mm
aMax. allowable acceleration 50 m/s2
VHF 25
002
