VHF 25 Single Phase Rectifier Bridge IdAV = 32 A VRRM = 600-1200 V Preliminary data VRSM VDSM VRRM VDRM V V 700 900 1300 600 800 1200 K Type G A H N VHF 25-06io7 VHF 25-08io7 VHF 25-12io7 D Symbol Test Conditions IdAV TC = 85C, module 32 A ITAVM/IFAVM TC = 85C; (180 sine ; per thyristor) 16 A ITSM/IFSM TVJ = 45C; VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 180 190 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 150 A2s A2s t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 160 150 2 As A2s TVJ = TVJM repetitive, IT = 20 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.15 A non repetitive, IT = ITAVM diG/dt = 0.15 A/ms 100 A/ms 500 A/ms 500 V/ms 10 V 5 2.5 0.5 W W W -40...+125 125 -40...+125 C C C 2500 3000 V~ V~ I2t TVJ = TVJM VR = 0 (di/dt)cr (dv/dt)cr Maximum Ratings TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) VRGM PGM TVJ = TVJM IT = ITAVM tp = 30 ms tp = 300 ms PGAVM TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL 1 mA Md Mounting torque (M4) Weight typ. t = 1 min t=1s 1.5 - 2 14 - 18 18 Features * Package with DCB ceramic base plate * Isolation voltage 3000 V~ * Planar passivated chips * Low forward voltage drop * Leads suitable for PC board soldering Applications Supply for DC power equipment DC motor control Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling capability * Small and light weight Nm lb.in. g 002 Data according to IEC 60747 refer to a single diode/thyristor unless otherwise stated for resistive load at bridge output. IXYS reserves the right to change limits, test conditions and dimensions. (c) 2000 IXYS All rights reserved 1-2 VHF 25 Symbol Test Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM 5 VT IT 1.6 V VT0 rT For power-loss calculations only (TVJ = 125C) 0.85 27 V mW VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL = 20 A; TVJ = 25C mA TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 1.5 2.5 25 50 V V mA mA VD = 2/3 VDRM 0.2 3 V mA TVJ = 25C; tP = 10 ms IG = 0.1 A; diG/dt = 0.1 A/ms 75 mA IH TVJ = 25C; VD = 6 V; RGK = 50 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.1 A; diG/dt = 0.1 A/ms 2 ms RthJC per thyristor; DC per module per thyristor; DC per module 1.3 0.22 1.8 0.3 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 11.2 9.5 50 mm mm m/s2 RthJK dS dA a 002 Dimensions in mm (1 mm = 0.0394") (c) 2000 IXYS All rights reserved 2-2