S/MON/SC869910/A/22/02/2000 page 1 /2 F/GB Relais statique monophase de puissance Power Solid State Relay SC869910 90-240VAC control 125A/400VAC output * Sortie AC synchrone : 24-520VAC-125A * Possibilite de protection IP20 en option : Capot 1K470000 * Adapte a tout type de charges * 24-520VAC -125A Zero-Cross AC Output. * IP20 Protection optional (1K470000). * Designed for all types of loads Dimensions/Size Application typique/Typical application 28 24-520VAC 22,80,5 28 O4,7 19,6 protection reseau line protection M5 1 2~ Entree control 90-240VAC 47,6 43,2 58,2 1~ = 2 3+ * 1-2 peuvent etre inversees/ 1 -2 can be changed * le relais doit etre monte sur dissipateur thermique / SSR must be mounted on a heatsink * option : couvercle de protection des bornes : 1K470 000 / cover : 1K470 000 25,8 25,4 44,5 5,1 7,5 4- CHARGE/ LOAD M3 Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Symbol Uc Ic Uc off Rc Min 90 3 1 fig. 1 :Caracteristique d'entree / Control characteristic fig1 : Caracteristique d'entree / Control characteristic Max 240 8 30 Unit V mA V K 8 6 Ic (mA) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Resistance interne / Input internal resistor fig.1 AC Nom 4 2 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/Rated impulse voltage Uimp 4000 VRMS VRMS V 0 00 20 40 60 8 0 100 120 140 160 180 200 220 240 Uc (V) Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. Conditions Symbol Typ. 90 -40 / +100 Unit g C C celduc r e l a i s S/MON/SC869910/A/22/02/2000 page 2 / 2 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity Conditions Symbol Typ. Unit Ue 400 V rms Ue min-max 24-520 V rms Up 1200 V Usync 12 V Ie nom Ua 10 V ( see Fig. 2 ) Ie AC-51 125 A rms ( see Fig. 2 ) Ie AC-53 25 A rms tp=10ms (Fig. 3) Itsm 2000 A @ Ie nom Vd 1,3 V @Ue, 50Hz Ilk <3 mA Ie min 5 mA Uc nom DC ,f=50Hz ton max 30 ms Uc nom DC ,f=50Hz toff max 30 ms f 0,1-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 20000 A2s IEC 1000-4-4 (burst) 2kV criterion A IEC 1000-4-5(schocks) 2kV crit.A with external VDR EN60947-4-x T case max (C) Fig. 2 Courbes thermiques / Thermal characteristics Pd ( watts) 170 65 0,3K/W 160 70 150 140 Full on state 0,55K/W 130 80 120 0,75K/W 110 100 90 0,95K/W 90 1,1K/W 80 70 100 50% on state 60 1,6K/W 50 40 2,2K/W 30 20 6K/W 10 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 10 20 30 RMS load current : I (A) Itsm (Apeak) 1500 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. 500 Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 0 0,01 0,1 t (s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. 60 70 80 90 100 110 120 Ambient temperature : Tamb (C) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 125A(Itsm=2000A) / Surge current : Itsm (Apeak) = f(t) for 125A models with Itsm =2000A 2000 1000 40 50 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19