GT5-2P-DS(B) - Hirose Connector

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

7

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Termination of coaxial cables in automotive, medical and instrumentation applications

utilizes a single motion to crimp the center conductor, shield and outer insulation.

GT5 Series

— Connectors for coaxial shielded cables —

<

Several types and configurations: In-line, board mounted, combinations of

coaxial cable with signal/power, Multi-position and color/ keying variations.

>

Features

USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)

Cost efficient termination

Highly efficient and reliable single motion "Twin Crimp TM " termination allows high volume production

with semi-automatic equipment.

Space-saving Design

Lock-release latching system

Shock / vibration resistant electrical connections

Verification of the full contact insertion

Color and polarizing variations

Excellent High Frequency Performance

Refer to V.S.W.R. data on the following pages.

Applications

In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems,

RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of

communication equipment, office automation equipment, LAN systems.

*"Twin Crimp" is a registered trade mark of Hirose Electric.

SAE/USCAR-19

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

8

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

BTest Data (Using 1.5D-2V Type cable)

BTermination sequence

3.5

9.5 5

2. Crimp the cable to the terminal.

4. Fully insert the retainer.3. Insert the terminal in the housing until is fully locked.

1. Strip the cable.

High Frequency Characteristics (V.S.W.R.)

Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.

3.0

2.8

2.6

2.4

2.2

2.0

1.8

1.6

1.4

1.2

1

1.0 2.0 3.0GHZ

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

5.8

4.6

21.7

23.05

5.85.8 5.85.8

23.05

9

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Terminals for coaxial shielded cable

F Connector Terminals

*

GT5-30/0.7-1.5SCF(70)

GT5-2428/1.1-2.2SCF

GT5-2428/1.6-2.5SCF(70)

GT5-30/1.6-2.9SCF(70)

GT5-2428/1.6-2.9SCF(70)

GT5-2022/1.6-2.9SCF(70)

GT5-2022/F2.7-3.5SCF

(70)

GT5-2022/F3.3-3.8SCF

(70)

GT5-30/F3.3-5SCF(70)

GT5-2428/F3.3-5SCF(70)

GT5-2022/F3.3-5SCF(70)

GT5-30/F4-5SCF(70)

GT5-2428/F4-5SCF(70)

GT5-2022/F4-5SCF(70)

755-0065-1-70

755-0123-6-70

755-0078-3-70

755-0022-9-70

755-0002-1-70

755-0071-4-70

755-0077-0-70

755-0054-5-70

755-0016-6-70

755-0012-5-70

755-0034-8-70

755-0020-3-70

755-0024-4-70

755-0036-3-70

#30 or equivalent

#24 to 28 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

Part Number CL No.

Inner Insulation Diameter

0.6 to 0.9mm

1.0 to 1.4mm

1.5 to 2.0mm

2.0 to 2.5mm

2.5 to 2.9mm

3.0 to 3.6mm

1.4 to 1.8mm

2.0 to 2.4mm

2.3 to 2.7mm

2.6 to 3.4mm

3.3 to 3.7mm

3.6 to 4.0mm

4.6 to 5.0mm

1,300 pcs. per reel

1,100 pcs. per reel

Outer Diameter

Packaging RoHS

RoHS

YES

Conductor Size (AWG)

Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.

Part

Insulator

Crimp terminals

Outer terminals

Material

PBT

Phosphor bronze

Brass

Finish

Color: Dark gray

Tin plating

*

GT5-30/0.7-1.5PCF(70)

GT5-30/1.6-2.9PCF(70)

GT5-2428/1.6-2.9PCF

(70)

GT5-2022/1.6-2.9PCF

(70)

GT5-2022/F2.7-3.5PCF

(70)

GT5-2022/F3.3-3.8PCF

(70)

GT5-30/F3.3-5PCF(70)

GT5-2428/F3.3-5PCF

(70)

GT5-2022/F3.3-5PCF

(70)

GT5-30/F4-5PCF(70)

GT5-2428/F4-5PCF(70)

GT5-2022/F4-5PCF(70)

755-0017-9-70

755-0021-6-70

755-0001-9-70

755-0094-0-70

755-0076-8-70

755-0053-2-70

755-0015-3-70

755-0011-2-70

755-0033-5-70

755-0019-4-70

755-0023-1-70

755-0035-0-70

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

#30 or equivalent

#24 to 28 or equivalent

#20 to 22 or equivalent

Part Number CL No.

Inner Insulation

Diameter

0.6 to 0.9mm

1.5 to 2.0mm

2.0 to 2.5mm

2.5 to 2.9mm

3.0 to 3.6mm

1.4 to 1.8mm

2.6 to 3.4mm

3.3 to 3.7mm

3.6 to 4.0mm

4.6 to 5.0mm

900 pcs. per reel

Outer

Diameter Packaging

Conductor Size (AWG)

Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.

Part

Insulator

Crimp terminals

Outer terminals

Material

PBT

Brass

Finish

Color: Dark gray

Tin plating

M Connector Terminals

Low-insertion M Connector Terminals

Part

Insulator

Crimp terminals

Outer terminals

Material

PBT

Brass

Finish

Color: Dark gray

Tin plating

GT5L-30/0.7-1.5PCF(70)

GT5L-30/1.6-2.9PCF(70)

GT5L-2428/1.6-2.9PCF

(70)

GT5L-2428/1.6-2.5PCF

(70)

755-0068-0-70

755-0067-7-70

755-0066-4-70

755-0079-6-70

#30 or equivalent

#24 to 28 or equivalent

Part Number HRS No.

Inner Insulation

Diameter

0.6 to 0.9mm

1.5 to 2.0mm

1.4 to 1.8mm

2.6 to 3.4mm

2.3 to 2.7mm

900 pcs. per reel

Outer

Diameter Packaging

Conductor Size (AWG) RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

10

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

9.6

13

11.1

25

F Connectors

For Single-Conductor coaxial shielded cable

Housings

14.8

7.85

2.8

25

9.6

11.1

13

1.2

GT5R-1S/HU

GT5-1S-HU

Retainer (-Optional-Used with the housings: GT5-1S-HU,

GT5-1PP-HU, GT5N-1PP-HU, GT5H-1PP-HU)

Housing (Not requiring use of the retainer)

Part Number

GT5-1P/S-R

CL No. Material Color

755-0006-2 PBT Dark gray

Part Number

GT5R-1S-HU

CL No. Material Color

755-0047-0 PBT Light gray

(26.35)

Retainer

GT5-1S-HU

GT5-1S-HU(A)

GT5-1S-HU(B)

GT5-1S-HU(C)

GT5-1S-HU(D)

GT5-1S-HU(E)

GT5-1S-HU( I )

GT5-1S-HU(J)

GT5-1S-HU(K)

755-0004-7

755-0037-6

755-0038-9

755-0080-5

755-0081-8

755-0082-0

-

Light gray

Brown

Green

Blue

Purple

Pink

Black

Cream white

Pastel orange

Figure q

Figure w

Figure e

Figure r

Figure t

Figure y

Figure u

Figure i

Figure o

GT5-1PP-HU(70)

GT5-1PP-HU(A)(70)

GT5-1PP-HU(B)(70)

GT5-1PP-HU(C)(70)

GT5-1PP-HU(D)(70)

GT5-1PP-HU(E)(70)

GT5-1PP-HU( I )

GT5-1PP-HU(J)

GT5-1PP-HU(K)

GT5-1P-DS(70)

GT5-1P-DS(A)(70)

GT5-1P-DS(B)(70)

GT5-1P-DS(C)(70)

GT5-1P-DS(D)(70)

GT5-1P-DS(E)(70)

GT5-1P-DS( I )

GT5-1P-DS(J)

GT5-1P-DS(K)

Part Number CL No. Material Color

Key polarizing

code

Corresponding M Connector

Housing- In-line

Corresponding M Connector

Assembly- Board Mounting

-

A

B

C

D

E

I

J

K

USCAR-19

Coding

PBT

B

Shown with inserted retainer.

Figure qFigure wFigure e

Figure rFigure tFigure y

Figure uFigure iFigure o

B

Keying Configurations

RoHS

YES

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

14.3

11.8

13.4

9.85

0.8

30

25

12.2

9.2

6.8

30

25

17

13.5

9.95

15.9

3

0.6

11

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Part

Housing

Ground terminal

Material

PBT

Phosphor bronze

Finish

____

Tin plating

Housings

14.8

13.4

Outside ground connection

Mounting bracket

attachment side

30

(41.4)

(11.4)

20.25

(1.35)

GT5H-1PP-HU

GT5-1P/S-R

GT5-1S-HU

GT5-1P/S-R

(41.4)



30 (11.4)

(1.35)(1.35)

GT5N-1PP-HU

GT5-1P/S-R

GT5-1S-HU

GT5-1P/S-R

Figure qFigure wFigure e

Figure rFigure tFigure y

Figure uFigure iFigure o

M Connectors

GT5-1PP-HU(70)

GT5-1PP-HU(A)(70)

GT5-1PP-HU(B)(70)

GT5-1PP-HU(C)(70)

GT5-1PP-HU(D)(70)

GT5-1PP-HU(E)(70)

GT5-1PP-HU( I )(70)

GT5-1PP-HU(J)(70)

GT5-1PP-HU(K)(70)

755-0005-0-70

755-0039-1-70

755-0040-0-70

755-0103-9-70

755-0104-1-70

755-0105-4-70

-

Light Gray

Brown

Green

Blue

Purple

Pink

Black

Cream white

Pastel orange

Figure q

Figure w

Figure e

Figure r

Figure t

Figure y

Figure u

Figure i

Figure o

-

A

B

C

D

E

I

J

K

Part Number CL No. Corresponding F Connector

Housing Color

Key polarizing

code

USCAR-19

Coding

Note : Refer to pages 27 for panel mounting in-line bracket.

GT5-1S-HU

GT5-1S-HU(A)

GT5-1S-HU(B)

GT5-1S-HU(C)

GT5-1S-HU(D)

GT5-1S-HU(E)

GT5-1S-HU( I )

GT5-1S-HU(J)

GT5-1S-HU(K)

Housings (For use with H type

mounting bracket)

Housing (For use with N type mounting

bracket)

BFully mated connector assemblies.

Part Number

GT5H-1PP-HU (10)

CL No.

755-0093-7 10

Color Material Corresponding F Connector

Housing

Light Gray PBT GT5-1S-HU

GT5R-1S-HU

B

Keying Configurations

(31.35)

Retainer(GT5-1P/S-R)

B

Shown with inserted retainer.

RoHS

YES

RoHS

YES

Part Number

GT5N-1PP-HU

CL No.

755-0090-9

Color Material Corresponding F Connector

Housing

Light Gray PBT GT5-1S-HU

GT5R-1S-HU

RoHS

YES

Retainer(GT5-1P/S-R)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Part Number

GT5A-1PP-HU(70)

CL No.

755-0025-7-70

Part Material

Housing

Ground terminal

PBT

Brass

15

12.4

9.95

11.8

13

4

14

11.15

13.4

30 9.5

7

6.2

15

12.4

9.95

11.8

26

13.4

14

11.15

30 19

7

6.2

11.6

5.8

19

10.4

M3

30

15

GT5-1P/S-R

GT5-1S-HU

M3

Panel 

thickness:1.6

12

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Housings

Panel mounting, enhanced

shielding type

Finish

Color: Light gray

Tin plating

Corresponding F Connector Housing

GT5-1S-HU, GT5R-1S-HU

[]

BRecommended Panel Cut-out

BMounted and fully mated connector

assemblies

Note 1: Retainer is unnecessary.

Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws.

Note 1: Retainer is unnecessary.

Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws.

RoHS

YES

Part Number

GT5P-1PP-HU(70)

CL No.

755-0030-7-70

Part Material

Housing

Ground terminal

PBT

Brass

Finish

Color: Light gray

Tin plating

Corresponding F Connector Housing

GT5-1S-HU, GT5R-1S-HU

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

7

8.1

Assembly Diagram (1:1)

4

3.2

13.4

11.15

14

3.6

2.6

27.4

12.3

GT5-1S-HU

GT5-1P/S-R

Chassis

30

12.65

11.8

12.8

19

26

12.65

3.2

30

11.8

16.8

19

26

2.6

1.2

11.15

5

13.4

15.9

7

8.1

5

Assembly Diagram(1:1)

27.4

12.3

1

GT5-1S-HU

GT5-1P/S-R

Chassis

13

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Note 1: Retainer is unnecessary.

Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws.

Note 1: Retainer is unnecessary.

Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws.

BMounted and fully mated connector

assemblies

BMounted and fully mated connector

assemblies

Part Number

GT5B-1PP-HU(70)

CL No.

755-0051-7-70

Part Material

Housing

Ground terminal

PBT

Copper alloy

Finish

Color: Light gray

Tin plating

Corresponding F Connector Housing

GT5-1S-HU, GT5R-1S-HU

RoHS

YES

Part Number

GT5S-1PP-HU(70)

CL No.

755-0050-4-70

Part Material

Housing

Ground terminal

PBT

Copper alloy

Finish

Color: Light gray

Tin plating

Corresponding F Connector Housing

GT5-1S-HU, GT5R-1S-HU

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

GT5E-1P-DS(70)

14

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

20.4

15.4

21.3

GT5-1

GT5-1P/S-R

Note

GT5-1P-DS(70)

T=1.6

15.4

7.7

Panel

Connector assembly, Printed

Circuit Board Mounting Type

GT5-1P-DS(70)

GT5-1P-DS(A)(70)

GT5-1P-DS(B)(70)

GT5-1P-DS(C)(70)

GT5-1P-DS(D)(70)

GT5-1P-DS(E)(70)

GT5-1P-DS(I)(70)

GT5-1P-DS(J)(70)

GT5-1P-DS(K)(70)

755-0007-5-70

755-0041-3-70

755-0042-6-70

755-0083-3-70

755-0084-6-70

755-0085-9-70

-

Figure q

Figure w

Figure e

Figure r

Figure t

Figure y

Figure u

Figure i

Figure o

GT5-1P-DS

GT5-1P-DS(A)

GT5-1P-DS(B)

GT5-1P-DS(C)

GT5-1P-DS(D)

GT5-1P-DS(E)

GT5-1P-DS(I)

GT5-1P-DS(J)

GT5-1P-DS(K)

GT5-1S-HU

GT5-1S-HU(A)

GT5-1S-HU(B)

GT5-1S-HU(C)

GT5-1S-HU(D)

GT5-1S-HU(E)

GT5-1S-HU(I)

GT5-1S-HU(J)

GT5-1S-HU(K)

Part Number CL No. Color

Key polarizing

code

M Connector-Board Type

Corresponding F Connector

Housing

Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board

thickness of 1.6 mm) for the mounting screws.

* Eight types of keys are available.

Please use a mating F connector housing of a matching key type.

Light Gray

Brown

Green

Blue

Purple

Pink

Black

Cream white

Pastel orange

Part

Housing

0.64 x 1.1 Terminals

Insulator

Outer terminals

Material

PBT

Brass

PBT

Phosphor bronze

Finish

-

Tin plating

Dark gray

Tin plating

BRecommended PCB Mounting Pattern

BFully Mated connector assemblies

11.8

13.9

3

12.8

13.9

12.8

13.9

Figure qFigure wFigure e

Figure rFigure tFigure y

Figure uFigure iFigure o

12.8

RoHS

YES

GT5E-1P-DS(70) 755-0092-4-70

GT5-1S-HU

GT5R-1S-HU

Part Number CL No. Finish

Corresponding F

Connector Housing

Natural

Tin plating

Dark gray

Tin plating

Material

Part

PA

Brass

PBT

Phosphor bronze

Brass

Housing

0.64 x 1.1 Terminals

Insulator

Outer terminals

Lock pin

YES

RoHS

BFully Mated connector assemblies

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

16.6

25

13.3

11.50.4

1.2

Note 1: Used with separate retainer (GT5-2P/S-R).

Note 2: Please use a mating F connector of a matching key type.

15

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

F Connectors

Two-position type-Each Single-Conductor coaxial shielded cable

Figure qFigure wFigure eFigure r

GT5-2P/S-R

25

41.4

CAV NO

30

25

1.2

21.8

4.75

min.

17.75

5

2.8

1

1.52

0.6

Tin plating

14.5 8

5

1.3

1.5

4.2

7.8

9.8

6.8

1.6

GT5-2P/S-R

GT5-2S-HU

GT5-2P/S-R

Housings

GT5-2S-HU

GT5-2S-HU(A)

GT5-2S-HU(B)

GT5-2S-HU(C)

GT5-2S-HU(D)

755-0044-1

755-0059-9

755-0060-8

755-0097-8

755-0098-0

Figure q

Figure w

Figure e

Figure r

Figure q

D2

A2

B2

C2

Part Number CL No. Color

Key polarizing

code

USCAR-19

Coding

Light Gray

Brown

Green

Blue

Light Gray

Material

PBT

BShown with inserted retainer.

M Connectors

Housings[Panel Mounted Housing]

Figure qFigure wFigure eFigure r

GT5-2PP-HU(70)

GT5-2PP-HU(A)(70)

GT5-2PP-HU(B)(70)

GT5-2PP-HU(C)(70)

GT5-2PP-HU(D)(70)

755-0045-4-70

755-0063-6-70

755-0064-9-70

755-0099-3-70

____

Part Number CL No.

Key polarizing

code

Note1: Used with separate retainer (GT5-2P/S-R).

Coding D2 at USCAR-19 is GT5-2PP-HU.

Note2: Refer to page 27 for panel mounting in-line bracket.

Figure q

Figure w

Figure e

Figure r

Figure q

Color

Light Gray

Brown

Green

Blue

Light Gray

BRecommended Mounting Bracket dimensions.

BFully mated connector assemblies

Part

Housing

Ground terminal

Material

PBT

Phosphor bronze

Finish

-

Tin plating

BKeying Configurations

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

CAV NO

14.8

10.92.8

30

25

18.8

13.4

15.8



22.4

14.15

4

18.8

27.4

7.77 21.3

5.45

16

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

41.4

GT5-2S-HU

GT5-2P/S-R

3

Figure qFigure wFigure eFigure r

GT5-2P-DS (70)

Recommended Panel Cut-out

GT5-2P-DS (A)(70) GT5-2P-DS (B)(70) GT5-2P-DS (C)(70)

Housing

Retainer – 2 position (Used with GT5-2S-HU, GT5-2PP-HU,

and GT5N-2PP-HU)

Housing

GT5N-2PP-HU 755-0055-8

Part Number CL No. Color

Note :Used with separate retainer (GT5-2P/S-R).

Light gray

Material

PBT

BFully Mated connector assemblies

GT5-2P/S-R 755-0046-7

Part Number CL No. Color

Dark gray

Material

PBT

GT5-2P-DS(70)

GT5-2P-DS(A)(70)

GT5-2P-DS(B)(70)

GT5-2P-DS(C)(70)

GT5-2P-DS(D)(70)

755-0043-9-70

755-0061-0-70

755-0062-3-70

755-0101-3-70

755-0102-6-70

Figure q

Figure w

Figure e

Figure r

Figure q

D2

A2

B2

C2

Part Number CL No. Color

Key polarizing

code

USCAR-19

Coding

Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws

(for a board thickness of 1.6 mm) for the mounting screws.

Coding D2 at USCAR-19 is GT5-2P-DS.

Light Gray

Brown

Green

Blue

Light Gray

Material

PBT

BRecommended Board Mounting

Pattern

BMounted and fully mated

connector assemblies

BKeying Configurations

RoHS

YES

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

17

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Power Supply Terminals

F Connector Terminals

M Connector Terminals

2.3 2.8

19

2.8

1.9

2.7

20.7

GT7-2022SCF(70)

GT7A-2022SCF(70)

757-0001-1-70

757-0003-7-70

#20 to 22

Part Number CL No.

5,000pcs.per reel

3,000pcs.per reel

Material Finish Conductor Size (AWG) Outer

Diameter Packaging

Note 1: Sold by the reel. (See above table for number of Packaging.)

Note 2: This component is used only with applicable HRS housings.

Copper alloy Tin plating 1.4 to 2.4mm

2.6 to 3.1mm

Note 1: Sold by the reel. (See above table for number of Packaging.)

Note 2: This component is used only with applicable HRS housings.

RoHS

YES

GT7-2022PCF(70)

GT7A-2022PCF(70)

757-0002-4-70

757-0004-0-70

#20 to 22

Part Number CL No.

5,000pcs.per reel

3,000pcs.per reel

Material Finish Conductor Size (AWG) Outer

Diameter Packaging

Brass Tin plating 1.4 to 2.4mm

2.6 to 3.1mm

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

21.1

25

12.5

10.8

Retainer

18

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Combinaton Type (Two Single-Conductor Coaxial shielded Cables + One Power contact)

F Connectors

17.28

16.62.8

Housing

Note : Used with separate retainer (GT5-2/1S-R).

BShown with inserted retainer.

Retainer (exclusively for GT5-2/1S-HU)

GT5-2/1S-R 755-0003-4

Part Number CL No. Color

Dark gray

Material

PBT

M Connectors

Connector assembly, Printed

Circuit Board mounting

31.9

26.9

21.3 23.3

13.4

GT5-2/1P-DS(70) 755-0014-0-70

Part Number CL No.

Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board

thickness of 1.6 mm) for the mounting screws.

Housing

0. 64x1.1 Terminal

Insulator

Outer terminal

Tub terminal for DS 070

PBT

Brass

PBT

Phosphor bronze

Brass

Color: Light gray

Tin plating

Dark gray

Tin plating

Part Material Finish

For inner conductor

Thickness :

1.6mm

For outside conductor

For power supply

B

Recommended Board Mounting Pattern

26.9

23.7

4-R3.25

Board

13.3

0.3

B

Recommended Panel Cut-out

GT5-2/1S-HU 755-0009-0

Part Number CL No. Color

Light gray

Material

PBT

RoHS

YES

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

15.36

16.63.5

15.8

30

25

13.4

23.3

19

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

M Connectors

GT5-2/ 1PP-R

30 26.3

13.4

Mounting bracket 

attachment side

Outside ground connection

Retainer

1.52

0.6

1

1.6

6.8

4.2

7.8

17.75

1.5

4.75min.

5

8

2.8

14.5

9.8

Tin plating finish

Housing - with External Ground

BShown with inserted retainer.

Part Number

GT5N-2/1PP-HU

CL No.

755-0013-8

Material Color

PBT Light gray

Note : Used with separate retainer GT5-2/1PP-R.

Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU)

Part Number

GT5-2/1PP-R

CL No.

755-0010-0

Material Color

PBT Dark gray

B

Recommended Mounting Bracket Dimensions

Housing - without External Ground

Part Number

GT5-2/1PP-HU(70)

CL No.

755-0008-8-70

Part Material Finish

Housing

Ground terminal

PBT

Phosphor bronze

Color: Light gray

Tin plating

Note 1: Used with separate retainer (GT5-2/1PP-R ).

Note 2: Refer to page 27 for panel mounting in-line bracket.

RoHS

YES

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

14.8

27.6

2.8

35.8

31.9

9.2

3

1.2

30

21.5

14.6

13.8

16.2

31.9

8.5

33.6

31.9

12.5

11.5

25

20

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

F Connector

GT5-4P/S-R

Part Number

GT5-4S-HU

CL No.

755-0056-0

Material Color

USCAR-19

Coding

PBT Light gray D4

Note: Used with separate retainer (GT5-4P/S-R).

M Connector

Part Number

GT5N-4PP-HU

CL No.

755-0057-3

Material Color

USCAR-19

Coding

PBT Light gray D4

Note 1: The product should be used with a low-force insertion/withdrawal

M connector terminal.

Note 2: Used with separate retainer GT5-4P/S-R.

Retainer (Used with GT5-4S-HU and GT5N-4PP-HU)

Part Number

GT5-4P/S-R

CL No.

755-0058-6

Material Color

PBT Dark gray

4-Position – Single conductor shielded Coaxial cable BShown with inserted retainer.

RoHS

YES

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

12.6 Lot No.

35.8

40.8

45.8

24

10

5.25

CAV NOPIN No

10.6

34

0.5

3

14.3

15.1

21.3

21

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

M Connector

Panel Outline

For outer conductors

For center conductors

36.2

14.2

0.3

PCB

2-R3

2-R0.5

21.3

Panel

M3 Screw

Board

BRecommended Board Mounting Pattern

BRecommended Panel Cut-out

BMounted and fully mated connector assemblies

GT5-4P-DS(70) 755-0087-4-70 D4

Part Number CL No.

USCAR-19

Coding

Connector assembly, Printed Circuit Board Mounting

Housing

0.64✕1.1Terminal

Insulator

Outer terminal

PBT

Brass

PBT

Phosphor bronze

Light gray

Tin plating

Dark gray

Tin plating

Item Material Color / Finish

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

15.4

15.9

8.7

16.618.65

36

22

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

For Single Conductor Coaxial shielded Cable - Waterproof Type

F Connector

Housing

Part Number

GT5W-1S-HU

CL No.

755-0027-2

MaterialColor

PBT Light gray

Note: Specific retainer is determined by the type of the cable used.

Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS

representative for other diameters.

Retainer (Used with GT5W-1PP-HU, GT5JW-1PP-HU,

GT5W-1S-HU and GT5W-1P-HU)

Part Number

GT5W-1P/S-R

CL No.

755-0028-5

MaterialColor

PBT

Silicon rubber Compound

Dark gray

Dark blue

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

34

18.4

18.2

23

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

M Connectors

Housing

Part Number

GT5W-1P-HU

CL No.

755-0026-0

Part Material Color

Housing

Connector seal

PBT

Silicon rubber Compound

Light gray

White

Note: Use correct retainer.

Please check elsewhere for information about the bracket for

GT5JW-1PP-HU.

BMounted and fully mated connector assemblies

BRecommended Bracket Dimensions Diagram(for GT5W-1PP-HU)

Housings - Bracket Mounting

GT5W-1PP-HU

GT5JW-1PP-HU

755-0070-1

755-0069-2

Part Number CL No. Part

Housing

Connector seal

Material

PBT

Silicon rubber Compound

Color

Light gray

White

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

24

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

G Terminals

For Direct Coaxial Shielded

Cable Termination

14.6

10.8

2.5

6.3

9.3

0.4

28

1

3

6.9

19

1.5D-2V or equivalent

3.5

27

R1

1.9

Part Number

GTB-1.6CF(70)

CL No.

755-0049-5-70

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

3.5 1.5D-2V or equivalent

3.5 Heat-shrink 

tubing

Pre-

solder

3.5

Part Number

G-1.6PCF(70)

CL No.

755-0029-8-70

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

6.3

6.9

3

2

0.4

10.6

7

1.9

R1

1.5D-2V or equivalent

Heat-shrink tubing

72 3.5

1.2

2.3

2.9

Lands

BBoard Termination Pattern

BRecommended Completed Termination cross section

B

Board Termination Pattern

BCompleted Termination cross section

B

Board Termination Pattern

BCompleted Termination cross section

0.6

1.2

2.3

2.8

Lands

Part Number

GTA-1.6CF (70)

CL No.

755-0032-2 -70

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

RoHS

YES

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

2.9

0.6

1.2

Lands

R0.3

25

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

For Direct Coaxial Cable Termination

10.5

15

0.5 2

0.8

2.5

9

3

5.25

3.3

1

0.25

6.15

0.25

1.9

Pre-solder

2.8 3.5

R1

BRecommended Board

Termination Pattern

BCompleted Termination Cross Section

13.6

9.8

8.55

0.5 1.5

2.5

4.75

2.4

2.6

0.25

0.8

2.8

0.25

0.15

1.9

2.4

1.8

1.1

Lands

0.5

1.9

Pre-solder

7.4 0.7 3.5

R1

0.7D

equivalent

BRecommended Board

Termination Pattern

BRecommended Board

Termination Pattern

BRecommended Completed Termination cross

section

BRecommended Completed Termination cross

section

Part Number

GTA-0.7CF

CL No.

755-0074-2

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

Part Number

GTB-0.7CF

CL No.

755-0075-5

Material Finish Packaging

Brass Tin plating 1,500 pcs. Per reel

Lands

RoHS

YES

RoHS

YES

Part Number

GTE-3.7CF

CL No.

755-0122-3

Material Finish Packaging

Brass Tin plating 1,100 pcs. Per reel YES

RoHS

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

26

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Bottom Shield cover

5.4

5.6

5

2.63

3.3

6.45

5.6 T=0.25

R1.6

Part Number

GT5-1P/S-CSB(70)

CL No.

755-0048-2-70

Material Finish

Brass Tin plating

Mounted Condition Installed

Top Shield cover

For Improved Electronic Noise Compatibility

RoHS

YES

Part Number

GT5C-1P-CSB( 70)

CL No.

755-0088-7-70

Material Finish

Brass Tin plating

RoHS

YES

2.5

5

8

3

R1

3.5

0.2

Raised point of 

contact

8.2

A

B B

6

6.5

2.5

0.6

T-0.4

5

(0.25)

7.5

634

(0.52)

C

4.6

Setscrew (M2.5)

Panel

For use with 

coaxial cables 

2.9 to 3.4 mm. 

outside diameter.

For Mid-Cable Termination

Part Number

GT-1.6PG-C(70)

CL No.

755-0031-0-70

Material Finish Packaging

Brass Tin plating 1

BRecommended Panel Cut-out

BAttachment Diagram

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

9.8

4.5

24.5

7.5

T=1

1.1

12

8

27

GT5 Series

GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

Automatic crimping machine

* Crimp height setting tables are available for each cable type. Please contact your

nearest Hirose Electric account representative.

Different cables will require different crimp height settings.

BTermination Tools

User's manuals are available. Please ask your Hirose Electric account representative.

Panel Mounting In-line Bracket

Item

Specification

Stroke length

Number of strokes

Weight

Motor

Crimping speed

Specification

1.5tons

30mm

200spm(50Hz)

75kg

0.2kW

2000 to 4000pcs. Per hour

Remarks

200spm(60Hz)

AC100V

Specifications

Part Number CM-105

Part Number

GT-BK(70)

CL No.

751-0039-6-70

Material Finish Used with connectors

SPCC Tin plating

GT5-1PP-HU(70), GT5-1PP-HU(B)(70)

GT5-1PP-HU(A)(70), GT5-1PP-HU(D)(70)

GT5-1PP-HU(C)(70), GT5-1PP-HU(I)(70)

GT5-1PP-HU(E)(70), GT5-1PP-HU(K)(70)

GT5-1PP-HU(J)(70), GT5-2PP-HU(70)

GT5-2/1PP-HU(70), GT5-2PP-HU(B)(70)

GT5-2PP-HU(A)(70), GT5-2PP-HU(D)(70)

GT5-2PP-HU(C)(70)

YES

RoHS

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

28

GT5 Series

GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

GT5-30/0.7-1.5PCF(70)

GT5-30/0.7-1.5SCF(70)

GT5-2428/1.1-2.2SCF

GT5-2428/1.6-2.5PCF(70)

GT5-2428/1.6-2.5SCF(70)

GT5-30/1.6-2.9PCF(70)

GT5-30/1.6-2.9SCF(70)

GT5-2428/1.6-2.9PCF(70)

GT5-2428/1.6-2.9SCF(70)

GT5-2022/1.6-2.9SCF(70)

GT5-2022/F2.7-3.5PCF(70)

GT5-2022/F2.7-3.5SCF(70)

GT5-2022/F3.3-3.8PCF(70)

GT5-2022/F3.3-3.8SCF(70)

GT5-2428/F3.3-5PCF(70)

GT5-2428/F3.3-5SCF(70)

GT5-2022/F3.3-5PCF(70)

GT5-2022/F3.3-5SCF(70)

GT5-30/F4-5PCF(70)

GT5-30/F4-5SCF(70)

GT5-2428/F4-5PCF(70)

GT5-2428/F4-5SCF(70)

GT5-2022/F4-5PCF(70)

GT5-2022/F4-5SCF(70)

G-1.6PCF(70)

GTA-0.7CF

GTB-0.7CF

GTA-1.6CF(70)

GTB-1.6CF(70)

Name of Applicabe Terminal Name of Applicabe Applicator CL No.

AP105-GT5-30/0.7-1.5P

AP105-GT5-30/0.7-1.5S

AP105-GT5-2428/1.1-2.2S-ID

AP105-GT5-2428/1.6-2.5P

AP105-GT5-2428/1.6-2.5S

AP105-GT5-30/1.6-2.9P-ID

AP105-GT5-30/1.6-2.9P

AP105-GT5-30/1.6-2.9P-A

AP105-GT5-30/1.6-2.9S-ID

AP105-GT5-30/1.6-2.9S

AP105-GT5-2428/1.6-2.9P

AP105-GT5-2428/1.6-2.9PWS

AP105-GT5-2428/1.6-2.9P-B

AP105-GT5-2428/1.6-2.9S

AP105-GT5-2428/1.6-2.9SWS

AP105-GT5-2428/1.6-2.9S-B

AP105-GT5-2022/1.6-2.9S

AP105-GT5-2022/F2.7-3.5P

AP105-GT5-2022/F2.7-3.5S

AP105-GT5-2022/F3.3-3.8P

AP105-GT5-2022/F3.3-3.8S

AP105-GT5-2428/F3.3-5P-ID

AP105-GT5-2428/F3.3-5S-ID

AP105-GT5-2022/F3.3-5P-ID

AP105-GT5-2022/F3.3-5P

AP105-GT5-2022/F3.3-5P2.2D-ID

AP105-GT5-2022/F3.3-5S-ID

AP105-GT5-2022/F3.3-5S

AP105-GT5-2022/F3.3-5S2.2D-ID

AP105-GT5-30/F4-5P-ID

AP105-GT5-30/F4-5S-ID

AP105-GT5-2428/F4-5P-ID

AP105-GT5-2428/F4-5P-3C2V

AP105-GT5-2428/F4-5S-ID

AP105-GT5-2428/F4-5S-3C2V

AP105-GT5-2022/F4-5P-ID

AP105-GT5-2022/F4-5P

AP105-GT5-2022/F4-5P-18ID

AP105-GT5-2022/F4-5P-RG58

AP105-GT5-2022/F4-5S-ID

AP105-GT5-2022/F4-5S

AP105-GT5-2022/F4-5S-18ID

AP105-GT5-2022/F4-5S-RG58

AP105-G-1.6P

AP105-GTA .B-0.7P

AP105-GTA .B-1.6P

CL901-5021-8

CL901-5080-7

CL901-5171-0

CL901-5100-2

CL901-5101-5

CL901-5019-6

CL901-5017-0

CL901-5040-2

CL901-5020-5

CL901-5018-3

CL901-5029-0

CL901-5031-1

CL901-5103-0

CL901-5030-9

CL901-5032-4

CL901-5104-3

CL901-5088-9

CL901-5091-3

CL901-5092-6

CL901-5075-7

CL901-5076-0

CL901-5037-8

CL901-5038-0

CL901-5058-8

CL901-5059-0

CL901-5070-3

CL901-5060-0

CL901-5061-2

CL901-5071-6

CL901-5033-7

CL901-5034-0

CL901-5035-2

CL901-5056-2

CL901-5036-5

CL901-5057-5

CL901-5054-7

CL901-5052-1

CL901-5121-2

CL901-5105-6

CL901-5055-0

CL901-5053-4

CL901-5102-8

CL901-5106-9

CL901-5041-5

CL901-5047-1

●Harnes Tool

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Hirose Electric:

AP105-GT5-2022/F3.3-3.8P AP105-GT5-2022/F3.3-3.8S AP105-GT5-2022/F3.3-5P AP105-GT5-2022/F3.3-5P(01

AP105-GT5-2022/F3.3-5P(69 AP105-GT5-2022/F3.3-5P(70 AP105-GT5-2022/F3.3-5P-ID AP105-GT5-2022/F3.3-5S

AP105-GT5-2022/F3.3-5S(01 AP105-GT5-2022/F3.3-5S(69 AP105-GT5-2022/F3.3-5S(70 AP105-GT5-2022/F3.3-5S-

ID AP105-GT5-2022/F4-5P AP105-GT5-2022/F4-5P(61) AP105-GT5-2022/F4-5P(62) AP105-GT5-2022/F4-5P(63)

AP105-GT5-2022/F4-5P(64) AP105-GT5-2022/F4-5P(65) AP105-GT5-2022/F4-5P(66) AP105-GT5-2022/F4-5P(67)

AP105-GT5-2022/F4-5P(68) AP105-GT5-2022/F4-5P-18ID AP105-GT5-2022/F4-5S AP105-GT5-2022/F4-5S(61)

AP105-GT5-2022/F4-5S(62) AP105-GT5-2022/F4-5S(63) AP105-GT5-2022/F4-5S(64) AP105-GT5-2022/F4-5S(65)

AP105-GT5-2022/F4-5S(66) AP105-GT5-2022/F4-5S(67) AP105-GT5-2022/F4-5S(68) AP105-GT5-2022/F4-5S-18ID

AP105-GT5-2428/1.6-2.5S AP105-GT5-2428/1.6-2.9P AP105-GT5-2428/1.6-2.9PWS AP105-GT5-2428/1.6-2.9S

AP105-GT5-2428/1.6-2.9SWS AP105-GT5-2428/F4-5P-3C2V AP105-GT5-2428/F4-5P-ID AP105-GT5-2428/F4-5S-

3C2V AP105-GT5-2428/F4-5S-ID AP105-GT5-30/0.7-1.5P AP105-GT5-30/0.7-1.5P(01) AP105-GT5-30/0.7-1.5P(61)

AP105-GT5-30/0.7-1.5P(62) AP105-GT5-30/0.7-1.5P(63) AP105-GT5-30/0.7-1.5P(64) AP105-GT5-30/0.7-1.5P(65)

AP105-GT5-30/0.7-1.5P(66) AP105-GT5-30/0.7-1.5P(67) AP105-GT5-30/0.7-1.5P(68) AP105-GT5-30/0.7-1.5P(69)

AP105-GT5-30/0.7-1.5S AP105-GT5-30/0.7-1.5S(61) AP105-GT5-30/0.7-1.5S(62) AP105-GT5-30/0.7-1.5S(63)

AP105-GT5-30/0.7-1.5S(64) AP105-GT5-30/0.7-1.5S(65) AP105-GT5-30/0.7-1.5S(66) AP105-GT5-30/0.7-1.5S(67)

AP105-GT5-30/0.7-1.5S(68) AP105-GT5-30/1.6-2.9P AP105-GT5-30/1.6-2.9P(01) AP105-GT5-30/1.6-2.9P(61)

AP105-GT5-30/1.6-2.9P(62) AP105-GT5-30/1.6-2.9P(63) AP105-GT5-30/1.6-2.9P(64) AP105-GT5-30/1.6-2.9P(65)

AP105-GT5-30/1.6-2.9P(66) AP105-GT5-30/1.6-2.9P(67) AP105-GT5-30/1.6-2.9P(68) AP105-GT5-30/1.6-2.9P(69)

AP105-GT5-30/1.6-2.9P(70) AP105-GT5-30/1.6-2.9P-ID AP105-GT5-30/1.6-2.9S AP105-GT5-30/1.6-2.9S(01)

AP105-GT5-30/1.6-2.9S(61) AP105-GT5-30/1.6-2.9S(62) AP105-GT5-30/1.6-2.9S(63) AP105-GT5-30/1.6-2.9S(64)

AP105-GT5-30/1.6-2.9S(65) AP105-GT5-30/1.6-2.9S(66) AP105-GT5-30/1.6-2.9S(67) AP105-GT5-30/1.6-2.9S(68)

AP105-GT5-30/1.6-2.9S(69) AP105-GT5-30/1.6-2.9S(70) AP105-GT5-30/1.6-2.9S-ID AP105-GT5-30/F4-5P-ID

AP105-GT5-30/F4-5P-ID(01) AP105-GT5-30/F4-5P-ID(61) AP105-GT5-30/F4-5P-ID(62) AP105-GT5-30/F4-5P-ID(63)

AP105-GT5-30/F4-5P-ID(64) AP105-GT5-30/F4-5P-ID(65) AP105-GT5-30/F4-5P-ID(66) AP105-GT5-30/F4-5P-

ID(67) AP105-GT5-30/F4-5P-ID(68) AP105-GT5-30/F4-5P-ID(69) AP105-GT5-30/F4-5P-ID(70) AP105-GT5-30/F4-

5S-ID