www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51031
1Revision: 16-Jun-08
P11
Vishay Sfernice
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
FEATURES
•12.5 mm square single turn panel control
•Five shaft diameters and 29 terminal styles
•Multiple assemblies - up to seven modules
•Tests according to CECC 41 000
•GAM T1
•P11S version for industrial, military and aeronautics
applications
•P11A version for professional audio applications
•Low current compatibility
•Shaft and panel sealed version
•Up to twenty-one indent positions
•Rotary and push/push switch options
•Concentric shafts
•Custom designs
•Trimmer version T11 (see document no. 51021)
RoHS
COMPLIANT
VERSATILE MODULAR COMPACT ROBUST
CONFIGURATION EXAMPLE
Single module, single shaft, solder lugs, metric bushing and shaft
Single module, single shaft, vertical mounting, PC pins with support plate, metric bushing and shaft
Dual modules, single shaft, PC pins with front support plates, imperial bushing and shaft
22
(0.866)
5.07
(0.200)
8
(0.315)
4.65
(0.183)
B
DETAIL B
0,9
(0.035)
1.8
(0.071)
M6 x 0.75
3
Ø (0.118)
2.4
(0.094)
12.5
(0.492)
4.65
(0.183)
12.5
(0.492) 5
(0.197)
6.85
(0.270)
13.1
(0.516)
4.9
(0.193)
M10 x 0.75
6
Ø (0.236) 9.5
(0.374)
16
(0.626)
12.7
(0.500)
8
(0.315)
2.54
(0.100)
2.54
(0.100)
3/8" x 3/8"
12.5
(0.492)
13.1
(0.516)
2.54
(0.100)
2.54
(0.100)
8
(0.325)
9.5
(0.374)
3.6
(0.143)
6.35
Ø (0.250)
19.05
(0.750) 7.62
(0.300)
Document Number: 51031 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 16-Jun-08 2
P11
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A) Vishay Sfernice
GENERAL SPECIFICATIONS
Note:
(1) Consult Vishay Sfernice for other ohmic values
ELECTRICAL (INITIAL)
P11A P11S
Resistive Element Conductive plastic Cermet
Electrical Travel 270° ± 10° 270° ± 10°
Resistance Range (1) linear law 1 kΩ to 1 MΩ20 Ω to 10 MΩ
non linear law 470 Ω to 500 kΩ100 Ω to 2.2 MΩ
Tolerance standard ± 20 % ± 20 %
on request - ± 5 % or ± 10 %
Power Rating at 70 °C
linear law 0.5 W at + 70 °C 1 W at + 70 °C
non linear law 0.25 W at + 70 °C 0.5 W at + 70 °C
multiple assemblies 0.25 W at + 70 °C per module 0.5 W at + 70 °C per module
Temperature Coefficient (Typical) ± 500 ppm ± 150 ppm
Limiting Element Voltage 350 V 350 V
End Resistance (Typical) 2 Ω2 Ω
Contact Resistance Variation linear law 1 % 2 % or 3 Ω
Independent Linearity (Typical) linear law ± 5 % ± 5 %
Insulation Resistance 106 MΩ min. 106 MΩ min.
Dielectric Strength 1500 VRMS min. 1500 VRMS min.
Attenuation 90 dB max./0.05 dB min. -
Mechanical Rotation Life 50 000 cycles 50 000 cycles
MECHANICAL (INITIAL)
Mechanical Travel 300° ± 5°
Operating Torque (Typical):
Single and Dual Assemblies:
3 mm, 4 mm (1/8") Dia. Shafts
6 mm (1/4") Dia. Shafts
Three to Seven Modules (Per Module):
0.5 to 1.3 Ncm max. (0.7 to 1.8 oz.-inch max.)
0.7 to 1.5 Ncm max. (1.0 to 2.1 oz.-inch max.)
0.2 to 0.3 Ncm max. (0.3 to 0.45 oz.-inch max.)
End Stop Torque (All Bushing Except G)
3 mm, 4 mm (1/8") Dia. Shafts
6 mm (1/4") Dia. Shafts
25 Ncm max. (2.1 lb-inch max.)
80 Ncm max. (6.8 lb-inch max.)
End Stop Torque for Bushing G
All Shafts Dia. 40 Ncm max. (3.4 lb-inch max.)
Tightening Torque
6 mm, 7 mm (1/4") Dia. Bushings
10 mm (3/8") Dia. Bushings
150 Ncm max. (13 lb-inch max.)
250 Ncm max. (21 lb-inch max.)
Weight 7 g to 9 g per module (0.25 to 0.32 oz.)
ENVIRONMENTAL
P11A P11S
Operating Temperature Range - 55 °C to + 125 °C - 55 °C to + 125 °C
Climatic Category 55/125/21 55/125/56
Sealing IP64 IP64
Storage Temperature - 55 °C to + 125 °C - 55 °C to + 150 °C
MARKING
•Potentiometer Module
VISHAY logo, nominal ohmic value (Ω, kΩ, MΩ), two stars
identify P11A version, tolerance in % - variation law,
manufacturing date (four digits), “3” for the lead 3
•Switch Module
Version, manufacturing date (four digits), “c” for common lead
•Indent Module
Version, manufacturing date (four digits)
PACKAGING
•Box
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51031
3Revision: 16-Jun-08
P11
Vishay Sfernice 12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
PERFORMANCES
TESTS CONDITIONS TYPICAL VALUE AND DRIFTS
P11S P11A
Load Life 1000 h at + 70 °C
(90'/30')
total resistance shift
contact resistance variation
± 2 %
± 4 %
± 10 %
± 5 %
Temperature Cycle - 55 °C to + 125 °C, 5 cycles total resistance shift ± 0.2 % ± 0.5 % typical
Moisture + 40 °C, 93 % relative humidity total resistance shift
insulation resistance
56 days
± 2 %
> 1000 MΩ
21 days
± 5 %
> 10 MΩ
Rotational Life P11S/P11A: 50 000 cycles total resistance shift
contact resistance variation
± 5 %
± 5 %
± 6 %
± 4 %
Climatic Sequence
Dry heat at + 125 °C/damp heat
cold - 55 °C/damp heat
5 cycles
total resistance shift ± 1 % -
Shock 50 g, 11 ms
3 shocks - 3 directions
total resistance shift
resistance setting change
± 0.2 %
± 0.5 %
± 0.2 %
± 0.5 % typical
Vibration 10 to 55 Hz
0.75 mm or 10 g, 6 h
total resistance shift
voltage setting change
± 0.2 %
± 0.5 % typical
± 0.2 %
± 0.5 % typical
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL STYLE
NUMBER
OF
MODULES
BUSHING LOCATING
PEG SHAFT SHAFT
STYLE LEADS
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
P11 S =
CERMET ELEMENT
A =
CONDUCTIVE PLASTIC
(AUDIO)
1
2
3
4
5
6
7
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
P11S CERMET P11A CONDUCTIVE PLASTIC
LINEAR LAW
TYPICAL TCR
- 55 °C/+ 125 °C
LINEAR LAW NON LINEAR LAW
MAX.
POWER
AT 70 °C
MAX.
WORKING
VOLTAGE
MAX. CUR.
THROUGH
WIPER
MAX.
POWER
AT 70 °C
MAX.
WORKING
VOLTAGE
MAX. CUR.
THROUGH
WIPER
MAX.
POWER
AT 70 °C
MAX.
WORKING
VOLTAGE
MAX. CUR.
THROUGH
WIPER
P11S P11A
ΩWV mAWV mAWV mAppm/°C
22
47
50
100
200
470
500
1K
2.2K
4.7K
5K
10K
22K
47K
50K
100K
220K
470K
500K
1M
2.2M
4.7M
1
1
0.56
0.26
0.25
0.12
0.05
0.02
4.69
6.85
7.07
10
14.8
21.6
22.4
31.6
46.9
63.5
70.7
100
148
217
224
316
350
350
350
350
350
350
213
146
141
100
67.4
46.1
44.7
31.6
21.3
14.5
14.1
10
6.7
4.6
4.47
3.16
1.59
0.75
0.70
0.35
0.16
0.07
0.5
0.5
0.26
0.12
0.25
15.3
15.8
22.4
33.2
48.5
50.0
79.7
105
153
158
224
332
350
350
350
32.7
31.6
22.4
15.1
10.3
10.0
7.07
4.77
3.26
3.16
2.24
1.51
0.74
0.70
0.35
0.5
0.5
0.5
0.26
0.25
22.4
33.2
48.5
50.0
79.7
105
153
158
224
332
350
350
22.4
15.1
10.3
10.0
7.07
4.77
3.26
3.16
2.24
1.51
0.74
0.70
± 150 ± 500
2Q0EASY 0 0 M1P S1 013A
Document Number: 51031 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 16-Jun-08 4
P11
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A) Vishay Sfernice
Notes:
• Hardware supplied in separate bags
• Slotted bushing for locking nut option
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL STYLE
NUMBER
OF
MODULES
BUSHING LOCATING
PEG SHAFT SHAFT
STYLE LEADS
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
P11
Ø L Old Codes
A 1/4" 1/4" 7, 77, 77-3
B 1/4" 3/8" 71
C 1/4" 1/2" 72
D 1/4" 3/8" 71H
E 1/4" 1/2" 72H
F 3/8" 3/8" 2, 03, 0-
G 8 8 TP, QP, VP, 2P, 7P
Q7 8 Q
T6 8 T
V 10 9.5 V, CC, CC-3
BUSHING DIMENSIONS
PANEL CUT OUT
AB
CK
J
Ø H
G
Bushings
F and V
G
Ø H
Bushings A, B,
C, D, E, T and Q
7.2
(0.284)
Ø 8.5
(0.335)
Bushing G
PANEL AND SHAFT SEALED: BUSHING G
BUSHING D AND E WITH LOCKING NUT
All models have the same bushing Dia. 8 mm - L 8 mm
Ø 8 (0.315)
6.7 (0.264)
8
(0.315)
AB
C
Wrench 10 or 3/8"
J
BUSHINGS GTQVABCDEF
DIMENSIONS mm (± 0.5) DIMENSIONS INCHES (± 0.01)
A Shafts Ø all Dia. 3 4 6 1/8" 1/8" 1/8" 1/8" 1/8" 1/4"
B Bushing Ø 8 6 7 10 1/4" 1/4" 1/4" 1/4" 1/4" 3/8"
C L 8 8 8 9.5 1/4" 3/8" 1/2" 3/8" 1/2" 3/8"
JLead Versions
X.. Y.. 6.7 5 5 7 0.200 0.200 0.200 0.200 0.200 0.278
K 10.4 9.1 9.1 11.1 0.357 0.357 0.357 0.357 0.357 0.436
G Panel 7.2 5.2 6.2 8.2 0.197 0.197 0.197 0.197 0.197 0.323
H Cutout Ø 8.5 6.5 7.5 10.5 0.268 0.268 0.268 0.268 0.268 0.394
Threat 0.75 32 threads/inch
Wrench Nut 12 8 10 12 0.313 0.313 0.313 0.313 0.313 0.500
Style slotted slotted
2Q0EASY 0 0 M1P S1 013A
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51031
5Revision: 16-Jun-08
P11
Vishay Sfernice 12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL STYLE
NUMBER
OF
MODULES
BUSHING LOCATING
PEG SHAFT SHAFT
STYLE LEADS
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
Old Codes
A = B24
B = B30
C = B53
0 = Without
peg
LOCATING PEGS (Anti-Rotation Lug)
The locating peg is provided by a plate mounted on the bushing
and positioned by the module sides. Four set positions are
available, clock face orientation: 12, 3, 6, 9. CODE VERSION
BUSHING
A, B, C, D,
E, T, Q
BUSHING
F, V
EFFECTIVE
HIGH PEG
All P11 bushings have a double flat. When panel mounting
holes have been punched accordingly, an anti-rotation lug is
not necessary.
A
Ø d mm 2 2 0.7
L mm 6.2 6.2
B
Ø d mm 2 2 0.7
L mm 7.75 7.75
C
Ø d mm - 3.5 1.1
L mm - 13.5
Locating pegs are supplied in separate bags with nuts and
washers
12
L
3
6
9
Ø d
2Q0EASY 0 0 M1P S1 013A
Document Number: 51031 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 16-Jun-08 6
P11
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A) Vishay Sfernice
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL STYLE
NUMBER
OF
MODULES
BUSHING LOCATING
PEG SHAFT SHAFT
STYLE LEADS
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
Ø L Old Codes S = Slotted
AA 3 9.5 K R = Round
AB 3 12.5 M F = Flatted
AJ 3 22 R K = Knurled/
splined
AP = Custom shaft
BA 1/8" 3/8" CK D = Custom
BB 1/8" 1/2" CM
BG 1/8" 5/8" CDM
BG 1/8" 5/8" CD
BH 1/8" 3/4" CH
BJ 1/8" 7/8" CR
CC = Concentric shaft
EA 4 9.5 E
EB 4 12.5 F
EJ 4 22 G
FG 6 16 D
FH 6 19 I
FL 6 25 N
FR 6 50 S
GG 1/4" 5/8" VD
GH 1/4" 3/4" VHM, VH
GJ 1/4" 7/8" VR
GL 1/4" 1" VN
GO 1/4" 1.5" VL
SHAFTS
The shaft length are always measured from the mounting face.
Standard shafts are designed by a 3 letter code (3 digits). Shafts
slots are aligned to ± 10° of the wiper position.
All standard shafts are slotted except flatted and splined, see
exeptions for bushing.
BUSHING: Q
SPLINED SHAFT: FHK
FLATTED SHAFT
CUSTOM SHAFTS
When special shafts are required - flat, threated ends, special
shaft lengths, etc. a drawing is required.
STANDARD COMBINATION OF SHAFT STYLES AND BUSHINGS
SHAFT DIA. BUSHING’ CODE SHAFT LENGTH AND STYLE AVAILABLE IN STANDARD (Others on request)
3 T AAS ABS AJS
3.17 A BAS BBS BGS BGF BHS BJS
3.17 B BBS BGS BHS BJS
3.17 C BGS BHS BJS
4 Q EAS EBS EJS FHK
6 V FGS FLS FRS
6.35 F GGS GHS GJS GLS GOS GHF
Ø 7
Ø 6
19
19.1
8 ± 0.5
Ø 6.35
+ 0
- 0.05
5.5 ± 0.05
BUSHING: F
SHAFT: GHF
BUSHING: A
SHAFT: BGF
15.9
8 ± 0.5
2.4 ± 0.05
Ø 3.17
+ 0
- 0.03
0.3 at 45°
2Q0EASY 0 0 M1P S1 013A
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51031
7Revision: 16-Jun-08
P11
Vishay Sfernice 12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL STYLE
NUMBER
OF
MODULES
BUSHING LOCATING
PEG SHAFT SHAFT
STYLE LEADS
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
Available leads
A00 W00 X00 Y00 Z00
A10 W10 X03 Z03
A13 W20 X04 Z04
A14 X10 Z10
A20 X13 Z13
A23 X14 Z14
A24 X20 Z20
X23 Z23
X24 Z24
FIRST DIGIT SECOND DIGIT THIRD DIGIT
Y
Soldering lugs - 4.70 mm (0.185") pin
spacing
0
5.08 mm (0.200") pin spacing for X, Z, W
pins section 0.9 x 0.3 mm
2
(0.035" x 0.012")
0
5.08 mm (0.200") space between modules
3
7.62 mm (0.300") space between modules
X
PCB pins
1
2.54 mm (0.100") pin spacing for X, Z, W
pin section 0.6 x 0.3 mm
2
(0.024" x 0.012")
4
10.16 mm (0.400") space between modules
Z
PCB pins with front support plate
A
PCB pins with front and back support plates
2
5.08 mm (0.200") pin spacing for X, Z, W
pins section 0.6 x 0.3 mm
2
(0.024" x 0.012")
W
PCB pins - vertical mounting with 2 extra
pins - 1 module only
DIMENSIONS
THE POSITION OF EACH MODULE IS FREE
BUSHINGS GTQVABCDE F
DIMENSIONS mm (± 0.5) DIMENSIONS INCHES (± 0.01)
E Leads Z00 3.15 1.85 1.85 3.85 0.071 0.071 0.071 0.071 0.071 0.150
E Leads Z1. Z2. A.. 2.8 1.6 1.6 3.6 0.063 0.063 0.063 0.063 0.063 0.140
F Leads Z0.: 5.08 mm (0.200") Leads A.. Z1. Z2.: 3.81 mm (0.150")
J Leads X.. Y.. 6.7 5 5 7 0.200 0.200 0.200 0.200 0.200 0.278
E Leads Z0. with Rotary Switch 1.45 0.15 0.15 2.15 0.006 0.006 0.006 0.006 0.006 0.0846
3.71
(0.146)
6.85
(0.270)
J
13
(0.512)
4.7
(0.185)
12.5
(0.492)
12.5
(0.492)
4.7
(0.185)
2.4
(0.09)
1.8
(0.07)
5
(0.197)
0.9
(0.035)
0.9
(0.035)
SOLDER LUGS Y
1
2.54
(0.100)
5.08
(0.200)
X12X-X
23 123
PCB PIN OUT
HORIZONTAL MOUNTING
EF
6.35
(0.250)
3
2
1
A/A2
(0.150)
3.81
(0.150)
A1
3.81
FRONT AND REAR SUPPORT PLATES FRONT SUPPORT PLATE
2.54
(0.100)
5.08
(0.200)
3.81
(0.150)
5.08
(0.200)
5.08
(0.200)
3.81
(0.150)
2Z1ZZ
123 123 123
VERTICAL MOUNTING
AB
CK4
(0.157)
12.7
(0.500)
12.7
(0.500)
5.08
(0.200)
2.54
(0.100)
12.7
(0.500)
W-W2
1 2 3
W1
12 3
REAR SUPPORT
PLATE
2Q0EASY 0 0 M1P S1 013A
Document Number: 51031 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 16-Jun-08 8
P11
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A) Vishay Sfernice
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL STYLE
NUMBER
OF
MODULES
BUSHING LOCATING
PEG SHAFT SHAFT
STYLE LEADS
RESISTANCE CODE/
TOLERANCE/
TAPER OR SPECIAL
Resistance Code:
102 = 1 kΩ to
105 = 1 MΩ
Tolerance Code:
M = 20 %, K = 10 %, J = 5 %
Taper: A, L, W, F, S, R
or
special code given by
Vishay
RESISTANCE CODE
See Conversion Table for ohmic value
VARIATION LAWS
ac
bcw
(2)
(3)
(1)
CIRCUIT DIAGRAM
R
FS
W
L
A
90 %
50 %
20 %
10 %
Vs%
Ve
Mechanical travel 300°
°13°13
Electrical travel
with switch 238°
15°
15° Electrical travel 270°
50 %
TOLERANCE
Standard: M = ± 20 %
On request: K = ± 10 %, J = ± 5 % (cermet only)
POWER RATING CHART
SPECIAL CODES GIVEN BY VISHAY
OPTION AVAILABLE
• Custom shaft
• Design on request
• Specific linearity
• Specific interlinerarity
• Specific variation law
• Multiple assemblies with various modules
130706050403020100
0
1
Ambient Temperature (°C)
Rated Power (W)
1201101009080
0.5
P11S Linear Law
P11S Non Linear Law
P11A Linear Law
0.25
P11A Non Linear Law
2Q0EASY 0 0 M1P S1 013A
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51031
9Revision: 16-Jun-08
P11
Vishay Sfernice 12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: ROTARY SWITCH MODULES
• Rotary switchs
• Current up to 2 A
• Actuation CW or CCW position
MODULES: RS ON/OFF SWITCH
RSI CHANGEOVER SWITCH
The position of each module is free.
RS and RSI rotary switches are housed in a standard P11 module
size 12.7 x 12.7 x 5.08 mm (0.5" x 0.5" x 0.2"). They have the
same terminal styles as the assembled electrical modules.
An assembly can comprise 1 or more switch modules.
Switch actuation is described as seen from the shaft end.
D:means actuation in maximum CCW position
F:means actuation in maximum CW position
The switch actuation travel is 25° with a total mechanical travel of
300° ± 5° and electrical travel of electrical module is 238° ± 10°.
RDS SINGLE POLE SWITCH, NORMALLY OPEN
In full CCW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CW direction.
RSF SINGLE POLE SWITCH, NORMALLY OPEN
In full CW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CCW direction.
RSID SINGLE POLE CHANGEOVER
In full CCW position, the contact is made between 3 and 2 and
open between 3 and 1. Switch actuation (CW direction) reverses
these positions.
RSIF SINGLE POLE CHANGEOVER
In full CW position, the contact is made between 1 and 2 and
open between 1 and 3. Switch actuation (CCW direction)
reverses these positions.
SWITCH SPECIFICATIONS
Switching Power Maximum 62.5 VA ν
15 VA =
Switching Current Maximum 0.25 A 250 V ν
0.5 A 30 V =
Maximum Current Through Element 2 A
Contact Resistance 30 mΩ
Dielectric
Strength
Terminal to Terminal 1000 VRMS
Terminal to Bushing 2000 VRMS
Maximum Voltage Operation 250 V ν
30 V =
Insulation Resistance Between Contacts 106 MΩ
Life at Pmax. 10 000 actuations
Minimal Travel 25°
Operating Temperature - 40 °C to + 85 °C
ELECTRICAL DIAGRAM
Note:
• Common
ORDERING INFORMATION (First order only)
RSD SPST: Single pole, open switch in CCW position - 2 pins
RSF SPST: Single pole, open switch in CW position - 2 pins
RSID SPDT: Single pole, changeover switch in CCW position - 3 pins
RSIF SPDT: Single pole, changeover switch in CW position - 3 pins
RSIF
CW POSITION
1* 32
RSID
CCW POSITION
13*2
RSD
RSF
13
RSID
Document Number: 51031 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 16-Jun-08 10
P11
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A) Vishay Sfernice
P11 OPTION: PUSH/PUSH OR MOMENTARY/PUSH SWITCH MODULES
• Push/push or momentary push
• Current up to 2 A
MODULES: PUSH/PUSH SWITCH RSPP
MOMENTARY/PUSH SWITCH RSMP
They have to be the last element of potentiometer
Options:
2 reversing switches F2 4 reversing switches F4
6 reversing switches F6 8 reversing switches F8
Not available with panel sealed option.
Number of modules before the switch limited to 3 modules.
Length of shaft (FMF) 25 mm maximum.
RSPP F2: PUSH/PUSH SWITCH WITH TWO REVERSING
SWITCHES
Idle position: The contact is made between 1 and 2 and a and b.
It is open between 2 and 3 and b and c.
Pushed position: The contact is made between 2 and 3
and b and c. It is open between 1 and 2 and a and b.
SWITCH SPECIFICATIONS
Switching Power Maximum 50 VA ν
Switching Current Maximum 0.5 A ν
Maximum Current Through Element 2 A
Contact Resistance 100 mΩ
Dielectric
Strength
Terminal to Terminal 1500 VRMS
Terminal to Bushing 2000 VRMS
Maximum Voltage Operation 250 V ν
Insulation Resistance Between Contacts 103 MΩ
Life at Pmax. 100 000 actuations
Minimal Travel 3.3 mm to 4.7 mm
Operating Temperature - 20 °C to + 70 °C
ELECTRICAL DIAGRAM
ORDERING INFORMATION (First order only for special code creation)
RSPP: Push/push F2: 2 reversing switches (standard version)
RSMP: Momentary/push F4: 4 reversing switches
F6: 6 reversing switches
F8: 8 reversing switches
3.3
(0.013)
1.3
(0.051)
40.8 (1.60)
28
(1.10)
(0.15)
4
3.6 (0.14)
a b c
1 2 3
(0.15)
4
RSPP F2
213
bac
IDLE POSITION PUSHED POSITION
RSPP F2
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51031
11 Revision: 16-Jun-08
P11
Vishay Sfernice 12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
P11 OPTION: CONCENTRIC SHAFTS
The CC concentric shaft versions allies the total flexibility of the P11 modular
system to the advantage of having two separate shafts.
The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules situated
immediately behind the panel, before the spacer module.
The inner 3 mm or 1/8" or 0.07" dia. shaft drives the modules situated after the
spacer module.
Spacer is available with a choice of two spacer thickness:
5.08 mm designations or 2.54 mm designation. See dimensional drawing
BUSHING
CODE
OUTER SHAFT DIAMETER INNER SHAFT DIAMETER
DIAMETER LENGTH L SHAFT STYLE DIAMETER LENGTH l SHAFT STYLE
V 6 16 R 3 28.5 R
F 6.35 (1/4") 16 R 3.17 (1/8") 28.5 R
A 3.17 (1/8") 12.7 (1/2") R 1.8 (0.07") 22.2 (7/8") R
ORDERING INFORMATION (First order only for special code creation)
2.54: Mechanical spacer of 2.54 mm
5.08: Mechanical spacer of 5.08 mm
Customer should define witch modules is driven by each shaft (see example of ordering information at the end of the data sheet)
P11 OPTION: DETENT MODULES
The valley detents mechanism is housed in a standard P11
module. Up to 21 detents position available.
Count detents as follows: 1 for CCW position, 1 for full CW
position, plus the other positions forming equal resistance
increments (linear taper) - not equal angles.
Available now: CVID - CVIF - CVIM
CV3 - CV11 - CV21
ORDERING INFORMATION (First order only for special code creation)
CV1M 1 detent at half travel
CV1M J84 CV1M with accuracy of center point ± 2 % (all laws except S)
CV1D 1 detent at CCW position
CV1F 1 detent at CW position
CV3 3 detents
CV11 11 detents
CV21 21 detents
P11 OPTION: NEUTRAL MODULES “EN”
Neutral or screen module is housed in a standard P11 module.
It is used as a screen between two electrical modules.
The leads can be connected to ground.
ORDERING INFORMATION (First order only for special code creation)
EN Neutral module
Spacer module
5.082.54
L
l
CVID CVIM CVIF CV1 1
ββα =
270 °
n - 1
β = α+ 15 °
α
5.08
CV1M
EN
Document Number: 51031 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 16-Jun-08 12
P11
12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A) Vishay Sfernice
P11 OPTION: CENTER CURRENT TAP “J”
The extra terminal is a solder lug connected at 50 % of electrical
travel and siluated in the potentiometer module opposite the
terminals.
Center tap short circuit 11° of travel.
ORDERING INFORMATION (First order only)
JCenter tap
P11 OPTION: SPECIAL LINEARITY - CONFORMITY
The independent linearity (conformity for the non linear laws) is
the maximum gap ΔV between the actual variation curve and the
theorical variation curve the nearest to it. The linearity and the
conformity are expressed in percentage of the total applied
voltage E
They are measured over 90 % of actual electrical travel
(centered).
On request linearity can be guaranteed in linear law.
ORDERING INFORMATION (First order only)
J123 Linearity ± 3 % (linear law)
J145 Linearity ± 2 % (linear law) For other request, contact us.
P11 OPTION: SPECIAL INTERLINEARITY - INTERCONFORMITY
It is the maximum deviation between the actual voltage outputs
of 2 or more pot modules in the same assembly. It is expressed
as a percentage of the total applied voltage, or in dB attenuation.
Interlinearity is measured between 2 pot modules, over 10 to
90 % of the attenuation.
The interlinearity or interconformity is expressed as a
percentage of the total applied voltage:
Or in decibels by comparison between outputs V1 and V2
ORDERING INFORMATION (First order only)
J44 Interlinearity ± 2 % (linear law) For other request, contact us.
V
E
V
Limits of
linearity test
Effective electrical travel
linearity conformity ± ΔVmax.
E
-----------------------
=
V
E
C
V1
V2
Limits of test
Effective electrical travel
V1V2
I % C
E
-------
=
I dB 20 log V1
V2
------
=
J
J123
J44
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51031
13 Revision: 16-Jun-08
P11
Vishay Sfernice 12.5 mm Modular Panel Potentiometers
Cermet (P11S) or Conductive Plastic Elements (P11A)
EXAMPLES OF FIRST ORDER INFORMATION
FIRST EXAMPLE: Triple module (switch is counted as a module)
MODEL
P11
STYLE
S3 MODULES BUSHING Q
(Ø7: L8)
WITHOUT LOCATING
PEG
CUSTOM SHAFT
SLOTTED SOLDER LUGS SPECIAL TO BE DEFINED
BY VISHAY
ORDERING INFORMATION:
PART NUMBER P11S3Q0APSY00.....
SHAFT AND BUSHING See drawing of special shaft attached
MODULE NO. 1 RSID
MODULE NO. 2 103 M A J123
MODULE NO. 3 503 M A J
SECOND EXAMPLE: Concentric shaft with 2 modules on each shaft
MODEL
P11
STYLE
S5 MODULES BUSHING V
(Ø10: L9,5)
WITHOUT LOCATING
PEG
STANDARD
CONCENTRIC
SHAFT CCR
SOLDER LUGS SPECIAL TO BE DEFINED
BY VISHAY
ORDERING INFORMATION:
PART NUMBER P11S5V0CCRY00.....
SHAFT AND BUSHING
MODULE NO. 1 CV1M Driven by outer shaft
MODULE NO. 2 502 K A Driven by outer shaft
MODULE NO. 3 5.08 Mechanical spacer 5,08 mm
MODULE NO. 4 103 K A J44 Driven by inner shaft
MODULE NO. 5 103 K A J44 Driven by inner shaft
PART NUMBER DESCRIPTION (used on some Vishay document or label, for information only)
P11S 2 Q 0 EA S Y00 10K 20 % A e3
MODEL MODULES BUSHING LOCATING
PEG SHAFT SHAFT
STYLE LEADS VALUE TOL. TAPER SPECIAL SPECIAL LEAD (Pb)-
FREE
3Q0APSY 01P S1 0
5V0CCRY 01P S1 0
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
