SFH 203 P
1Version 1.3 | 2018-06-21
Produktdatenblatt | Version 1.1
www.osram-os.com
SFH 203 P
Radial T1 3/4
Silicon PIN Photodiode
Applications
—Electronic Equipment
—Highbay Industrial
—Industrial Automation (Machine controls, Light
barriers, Vision controls)
—Smoke Detectors
—White Goods
Features:
—ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
—Wavelength range (S10%) 400 nm to 1100 nm
—Short switching time (typ. 5 ns)
—5 mm LED plastic package
Ordering Information
Type Photocurrent Photocurrent Ordering Code
typ.
Ev = 1000 lx; Std. Light A; VR = 5 V Ev = 1000 lx; Std. Light A; VR = 5 V
IPIP
SFH 203 P ≥ 5 µA 9.5 µA Q62702P0942
SFH 203 P
2Version 1.3 | 2018-06-21
Maximum Ratings
TA = 25 °C
Parameter Symbol Values
Operating Temperature Top min.
max.
-40 °C
100 °C
Storage temperature Tstg min.
max.
-40 °C
100 °C
Reverse voltage VRmax. 20 V
Reverse voltage
t ≤ 2 min
VRmax. 50 V
Total power dissipation Ptot max. 150 mW
ESD withstand voltage
acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
VESD 2 kV
SFH 203 P
3Version 1.3 | 2018-06-21
Characteristics
TA = 25 °C
Parameter Symbol Values
Wavelength of max sensitivity
λ
S max typ. 850 nm
Spectral range of sensitivity
λ
10% typ. 400 ... 1100
nm
Radiant sensitive area A typ. 1.00 mm²
Dimensions of active chip area L x W typ. 1 x 1
mm x mm
Half angle
φ
typ. 75 °
Dark current
VR = 20 V
IRtyp.
max.
1 nA
5 nA
Spectral sensitivity of the chip
λ
= 850 nm
S
λ
typ. 0.62 A / W
Quantum yield of the chip
λ
= 850 nm
η
typ. 0.90 Electrons
/ Photon
Open-circuit voltage
Ev = 1000 lx; Std. Light A
VOmin.
typ.
300 mV
350 mV
Short-circuit current
Ev = 1000 lx; Std. Light A
ISC typ. 9.3 µA
Rise time
VR = 20 V; RL = 50 Ω;
λ
= 850 nm
trtyp. 0.005 µs
Fall time
VR = 20 V; RL = 50 Ω;
λ
= 850 nm
tftyp. 0.005 µs
Forward voltage
IF = 100 mA; E = 0
VFtyp. 1.3 V
Capacitance
VR = 0 V; f = 1 MHz; E = 0
C0typ. 11 pF
Temperature coe󰘲cient of voltage TCVtyp. -2.6 mV / K
Temperature coe󰘲cient of short-circuit current
Std. Light A
TCItyp. 0.18 % / K
Noise equivalent power
VR = 20 V;
λ
= 850 nm
NEP typ. 0.029 pW /
Hz1/2
Detection limit
VR = 20 V;
λ
= 850 nm
D* typ. 3.5e12 cm x
Hz1/2 / W
SFH 203 P
4Version 1.3 | 2018-06-21
λ
OHF01129
0
rel
S
400 600 800 1000 1200
20
40
60
80
%
100
nm
Relative Spectral Sensitivity 1), 2)
Srel = f (
λ
)
Directional Characteristics 1), 2)
Srel = f (
φ
)
SFH 203 P
5Version 1.3 | 2018-06-21
Dark Current 1), 2)
IR = f (VR) ; E = 0
E
OHF01025
V
0
10
P
Ι
-1
10
10
1
10
2
10
4
10
0
10
0
V
O
µ
Am
V
Ι
P
V
O
10
3
lx
1
10
2
10 10
3
10
2
1
10
Photocurrent/Open-Circuit Voltage 1), 2)
IP (VR = 5 V) / VO = f (Ev)
Capacitance 1), 2)
C = f (VR); f = 1 MHz; E = 0;
SFH 203 P
6Version 1.3 | 2018-06-21
Dark Current 2)
IR = f (TA); E = 0; VR = 20 V
T
OHF00394
A
0
tot
P
020 40 60 80 ˚C 100
mW
20
40
60
80
100
120
140
160
Power Consumption
Ptot = f (TA);
SFH 203 P
7Version 1.3 | 2018-06-21
Dimensional Drawing 3)
0.6 (0.024)
0.4 (0.016)
5.9 (0.232)
5.5 (0.217)
1.0 (0.039)
0.5 (0.020)
3.85 (0.152)
3.35 (0.132)
5.0 (0.197)
4.2 (0.165)
29 (1.142)
27 (1.063)
1.8 (0.071)
1.2 (0.047)
2.54 (0.100)
spacing
0.6 (0.024)
0.4 (0.016)
0.8 (0.031)
0.4 (0.016)
ø5.1 (0.201)
ø4.8 (0.189)
Chip position
Area not flat
GEOY6648
Cathode
Approximate Weight: 268.0 mg
Package marking: Cathode
SFH 203 P
8Version 1.3 | 2018-06-21
Pad 1: anode
Recommended Solder Pad 3)
SFH 203 P
9Version 1.3 | 2018-06-21
TTW Soldering
IEC-61760-1 TTW
0
0s
OHA04645
50
100
150
200
250
300
t
T
˚C
235 ˚C - 260 ˚C
First wave
20 40 60 80 100 120 140 160 180 200 220 240
Second wave
10 s max., max. contact time 5 s per wave
Preheating
T
∆
100 ˚C
120 ˚C
130 ˚C
Typical
Cooling
ca. 3.5 K/s typical
ca. 2 K/s
ca. 5 K/s
Continuous line: typical process
Dotted line: process limits
< 150 K
SFH 203 P
10 Version 1.3 | 2018-06-21
Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of
lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED speci󰘰ed in this
data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-
sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the
eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light
sources have a high secondary exposure potential due to their blinding e󰘯ect. When looking at bright light
sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-
tion, annoyance, visual impairment, and even accidents, depending on the situation.
Packing information is available on the internet (online product catalog).
For further application related informations please visit www.osram-os.com/appnotes
SFH 203 P
11 Version 1.3 | 2018-06-21
Disclaimer
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language word-
ings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please 󰘰nd the latest version in the OSRAM OS Webside.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
sales o󰘲ce.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For
packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to
invoice you for any costs incurred.
Product safety devices/applications or medical devices/applications
OSRAM OS components are not developed, constructed or tested for the application as safety relevant
component or for the application in medical devices.
In case Buyer – or Customer supplied by Buyer– considers using OSRAM OS components in product safety
devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales
partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordi-
nate the customer-speci󰘰c request between OSRAM OS and Buyer and/or Customer.
SFH 203 P
12 Version 1.3 | 2018-06-21
Glossary
1) Testing temperature: TA = 25°C
2) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data
or calculated correlations of technical parameters can only re󰘱ect statistical 󰘰gures. These do not nec-
essarily correspond to the actual parameters of each single product, which could di󰘯er from the typical
data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical
improvements, these typ. data will be changed without any further notice.
3) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are speci󰘰ed with ±0.1 and
dimensions are speci󰘰ed in mm.
SFH 203 P
13 Version 1.3 | 2018-06-21
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.