1 Pt100 KN 2515 The KN Series Ceramic Wire Wound PRTDs are suitable for general applications requiring temperature stability. Applications: Industrial resistance thermometers, especially in chemical, power generation plants and analytical equipment. Construction: A platinum coil is sealed inside a high purity aluminum oxide ceramic body. Lead wires are shear force resistant and assure proper connection to extension leads and cables. Models Description Tolerance IEC 60751 L 1Pt100 KN 2515 W0.3 W0.15 W0.1 W0.03 32.206.370 32.206.372 32.206.374 32.206.099 Response time Self Heating 0C (K/mW) Water current Air stream V=3m/s V=0.4m/s Dimensions mm Order No. +2 25- 0 D d l 1.50.15 0.200.01 10.00.5 0.07 t 0.5 t 0.9 t 0.5 t 0.9 0.2 0.4 5.3 16.0 Technical Specification Nominal resistance: 100 Ohm @ 0 C Temperature range: W0.3 (Class B) = -196 to +660 C Insulation resistance > 100 MOhm @ 25 C after assembly: Measuring current: 1 mA W0.15 (Class A) = -196 to +600 C Tolerance class: W0.1 (Class 1/3 B) = -100 to +350 C W0.03 (Class 1/10 B) = -50 to +300 C (Special HST Class proportional to W0.3) Temperature coefficient: Tc = 3850 ppm/K Leads: Palladium-gold alloy - According to IEC 60751:2008 - Other standards and narrower tolerances are available on request Temperature stability: Excellent long-term stability Also available: - Platinum-gold alloy - Different temperature coefficients (3916 ppm/K - old JIS) - Extension leads - Two separated coils can be embedded in one ceramic body Status 01/2009. Technical modifications reserved. (Heraeus exceeds IEC 60751: -100 to +450 C) The measuring point is located at 8 mm from the end of the sensor body Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com www.hst-us.com Status: HSTUSA 10/09 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Heraeus: 32206372 32206374 32206170 32206099 32206370