Star Bright
Quick Start Guide
1 /4
DOCUMENT# E-M-0065-01 Date : November 16, 2011
1 Package Contents
1.1 Confirm all components are enclosed
1. Star Bright
2. DC Plug Adaptor
3. AC Adaptor
4. USB Cable
5. Remote Controller
6. CD-ROM
CD-ROM contains
Application software,
Message samples, and
Quick Start Guide (This
document).
2 Hardware setup
2.1 Insert Remote Controller batteries
2.2 Plug the DC Plug Adaptor into DC jacks
2.3 Plug in the AC Adaptor
Note: AAA batteries not included.
To insert batteries remove the battery cover on the back and
insert two AAA batteries as shown right.
Direction of battery is also shown in the compartment.
Replace battery cover and press a button to check that the LED at
the top left of the keyboard flashes.
Note: Please do not connect or disconnect the DC Plug
Adaptor while the power is on.
Note: Please connect the AC Adaptor directly to the AC
wall outlet for stable voltage.
6
Star Bright
Quick Start Guide
2 /4
DOCUMENT# E-M-0065-01 Date : November 16, 2011
2.4 Wait 5 seconds after applying power
2.5 Check for proper Remote Controller operation
2.6 Plug the USB Cable
2.7 USB Installation
Note: Please do not use the Remote Controller at this
time.
Note: Wording of the display may vary.
To test the Remote
Controller, press buttons
„1‟ though „F‟ on the
Remote Controller to
switch between the pre-
loaded messages. The
Remote Controller is
considered working when
messages switch via
pushing different number
keys.
Connect the USB Cable to the Star Bright‟s USB Port located on the back of
the middle. Then connect the opposite end of the USB Cable to the
available USB Port on your PC.
The display will automatically install Printer when the
display is initially connected.
The following pop ups shown on the left will appear when
the display is recognized. No driver software is required.
Star Bright
Quick Start Guide
3 /4
DOCUMENT# E-M-0065-01 Date : November 16, 2011
Check that the printer is installed as “Generic / Text Only”.
3 Software setup
3.1 Install Star Bright Message Editor from table of contents
1. Insert enclosed CD-ROM.
2. The table of contents will show up automatically.
3. Click the Star Bright Message Editor OPEN icon.
4. Run installer program “Star Bright Message Editor ver. 2.1.EXE”.
5. Follow the instructions on the installer program.
6. When the installer is successfully completed, the Star Bright Message
Editor shortcut will appear on your desktop.
3.2 Manual installation of Star Bright Message Editor
To manually install Star Bright Message Editor, please follow
the instructions below:
1. Open the Software folder in the CD-ROM.
2. Run Star Bright Message Editor ver. 2.1.EXE.
3. Follow the instructions.
Star Bright
Quick Start Guide
4 /4
DOCUMENT# E-M-0065-01 Date : November 16, 2011
4 Create and send messages
4.1 Basic steps
Type text message
Add display action
Send the message
The new message will
appear on the
Star Bright
4.2 Using Wizard
Select Wizard under File menu
Follow the instructions
And add message text
Send the message
The new message will
appear on the
Star Bright
4.3 Using Templates
Select Templates under File menu
Edit sample messages
Send the message
The new message will
appear on the
Star Bright
5 Contact
Please direct all inquires to Noritake Sales office below.
Or, go to online: http://www.noritake-elec.com/contact_us.htm
West Coast
Midwest
East Coast
Los Angeles Branch
21081 S. Western Ave. Ste 180
Torrance, CA 90501
Tel. (888) 795 - 3423
Electronics Div. HQ
Chicago Branch
2635 Clearbrook Dr.
Arlington Heights, IL 60005
Tel. (800) 779 - 5846
New Jersey Branch
15-22 Fair Lawn Ave.
Fair Lawn, NJ 07410
Tel. (888) 296 - 3423
