Resistors Mount SOIC Surface Resistor Networks Surface Mount SOIC Surface Mount SOIC SOIC Series Resistor Networks Resistor Networks * SOIC Seriesfor COTS applications Tested Both narrow and wide body versions available Tested for COTS applications Standard JEDEC 8, 14, 16, and 20 pin packages SOIC Series Both narrow and wide body versions available Ultra-stable TaNSil(R) resistors on silicon substrates * Tested for COTS applications Standard JEDEC 8, 14, 16, and 20 pin packages RoHS compliant andversions Sn/Pb terminations available * Both narrow and wide body Ultra-stable TaNSil(R) resistors onavailable silicon substrates * Standard JEDEC 8, and 14, 16, and 20terminations pin packages available Standard Sn/Pb Pb-free * * * * * Ultra-stable TaNSil(R) resistors on silicon substrates * RoHS compliant and Sn/Pb terminations available All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) IRC's TaNSil(R) SOIC resistor networks are the perfect solution for high volume applications that demand a small wiring board footprint. The .050" lead spacing provides higher lead density, increased component count, lower resistor cost, and high reliability. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC's self-passivating TaNSil(R) resistor film. The SOIC series is ideally suited for the latest surface mount assembly techniques and each lead can be 100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses created by soldering and temperature excursions. For applications requiring high performance resistor networks in a low cost, surface mount package, specify IRC SOIC resistor networks. Electrical Data Environmental Data Resistance Range 10R to 250K Absolute Tolerance To 0.1% Ratio Tolerance to R1 To 0.05% Absolute TCR To 25ppm/C Tracking TCR To 5ppm/C Element Power Rating @ 70C Isolated Schematic Bussed Schematic 100mW 50mW Power Rating @ 70C SOIC-N Package 8-Pin 14-Pin 16-Pin 400mW 700mW 800mW Power Rating @ 70C SOIC-W Package 16-Pin 20-Pin 1.2W 1.5W Rated Operating________________ Voltage (not to exceed Power X Resistance) Operating Temperature Noise Test Per MIL-PRF-83401 Typical Delta R Max Delta R Thermal Shock 0.02% 0.1% Power Conditioning 0.03% 0.1% High Temperature Exposure 0.03% 0.05% Short-time Overload 0.02% 0.05% Low Temperature Storage 0.03% 0.05% Life 0.05% 0.1% 100 Volts -55C to +125C <-30dB General Note General Note General Note IRC reserves the right to make changes in product specification without notice or liability. All is subject to IRC's own data andmake is considered accurate at time ofspecification going to print. Electronics reserves the toto make changes in product specification without noticenotice or liability. TTinformation electronics reserves theright right changes in product without or liability. AllIRC information isissubject TTTT Electronics' data and is considered accurate at time of going to print. All information subject to electronics' own data and considered accurate at time of going to print. (c) Advanced FilmtoDivision * 4222own South Staples Street *isCorpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com BI Technologies IRC Welwyn A subsidiary of TT electronics plc www.bitechnologies.com www.irctt.com www.welwyn-tt.com www.ttelectronics.com/resistors SOIC Series Issue January 2009 Sheet 1 of 4 plcplc (c) TT Electronics electronics 11.17 11. 13 Surface Mount SOIC Resistor Networks SOIC SOICSeries Series Surface SurfaceMount MountSOIC SOIC Resistor ResistorNetworks Networks Manufacturing Capability Data ISOLATED SCHEMATIC A Surface Mount QSOP Resistor Networks Absolute TCR (ppm/C) BUSSED SCHEMATIC B Ohmic Range () Available Tolerances Available Ratio Tolerances Best Tracking (ppm/C) Ohmic Range () Available Tolerances Available Ratio Tolerances Best Tracking (ppm/C) 10-25 FGJ FG 50 10-25 FGJ FG 200 10 26-50 FGJ DFG 100 26-50 DFGJ C DData FG Manufacturing Capability 51-200 CDFGJ CDFG ISOLATED SCHEMATIC A 5 51-100 201-250K Ohmic Range () BCDFGJ ABCDFG Available Available Ratio Tolerances Tolerances 5 Best Tracking (ppm/C) 101-200 Ohmic Range 201-500 () 100 501-100K 10-25 50 10 26-50 26-50 5 10 51-100 51-100 55 Best Tracking (ppm/C) 101-200 101-200 Ohmic Range 201-500 201-500 () 100 501-100K 501-100K 10-25 10 50 Best Tracking 55 (ppm/C) 10 51-100 26-50 Ohmic Range 101-200 51-100 () 250 Surface Mount QSOP Resistor Networks Absolute TCR (ppm/C) 10-25 FGJ FG 26-50 D CD DData G 26-50 D FF G G JJ C FF G Manufacturing Capability Surface Mount QSOP Resistor Networks 51-200 51-200 250 100 Absolute TCR (ppm/C) 201-250K 201-250K Ohmic Range () CD D FF G G JJ C C CD D FF G G ISOLATED SCHEMATIC A BC CD D FF G G JJ B AA BB C FDG FG Available Ratio Tolerances Available Manufacturing Capability Data Tolerances 10-25 Absolute TCR (ppm/C) 50 250 100 F G J SCHEMATIC FG A ISOLATED 26-50 26-50 Ohmic Range 51-200 51-200 () D FF G G JJ D Available CD D FF G G JJ C Tolerances C CD D FF G G Available Ratio C CD D FF G G Tolerances 201-250K 201-250K 10-25 B BC CFD DGFFJG G JJ AB B FG G AA B C D FG FF G 55 100 26-50 DFGJ CDFG 51-200 51-200 C CD D FF G G JJ 201-250K 201-250K 26-50 26-50 51-200 DFGJ CDFG BUSSED SCHEMATIC B DFGJ Available B CDFGJ Tolerances BCDFG Available Ratio BCDFG Tolerances B CFDGFJG J A B C FD GF G FGJ DF FG G D C DFGJ CD DF FG G BUSSED SCHEMATIC B DFGJ Available B CDFGJ Tolerances B BC CD D FF G G Available Ratio B BC CD DF FG G Tolerances B CFDGFJGSCHEMATIC J A AB BC C D FFBG G FD G BUSSED DFFGGJJ 50 25 Best Tracking 20 (ppm/C) 5 200 100 50 25 Best Tracking 20 (ppm/C) 5 200 Available DFGJ Tolerances CDDFFGG Available Ratio BCCDDFFGG Tolerances 50 100 Best Tracking 25 50 (ppm/C) 201-500 101-200 10-25 BC FJG DFD FGG J J B BC CFD DGFF G G 20 25 200 50 26-50 501-100K 201-500 DCD FDG B CFDGFJG J ABBC FFGG 100 5 20 CD D FF G G C 10 5 51-100 201-500 501-100K DD FG J J BC FG DDD FFG ABC BCC FGG 50 20 5 B FF G J BC CD DG D F G D F JJG J AA B C FG CB D FD FG G C D F G 55 50 50 101-200 501-100K 51-100 26-50 D F JJ J ABB FF BC FJG DFD FGG G CC DD FG GGG DC FD 25 5 50 100 CDFGJ CDFG 10 5 201-500 101-200 51-100 BC FG DD FG J J B BCC CDD DFF FGG G 20 25 50 5 501-100K 201-500 101-200 BC FG DD FG J J ABBCCDDFFGG 5 20 25 250 25 50 B South C DStaples F GStreet J * Corpus A Christi B FTexas G 78411 USA (c) IRC Advanced 201-250K Film Division * 4222 100 SOIC Series Issue January 2009 Sheet 2 of 4 Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com General GeneralNote Note 26-50 DFGJ CDFG 50 26-50 501-100K 201-500 B CFDGFJG J 51-200 CDFGJ CDFG 5 10 51-100 201-500 501-100K DD FTechnologies G J J ABC DDD FFG B BI C FG BCC FGIRC G 201-250K 26-50 BC FG DD FG J J AB C DF FG G 5 50 www.bitechnologies.com www.irctt.com 101-200 D F JJ J ABC 501-100K BC FG BCC FGG 51-100 DD FG G DDD FFG 51-200 CDFGJ CDFG 10 TT to to make changes in product specification without noticenotice or liability. TT Electronics electronicsreserves reservesthe theright right make changes in product specification without or liability. 25 All is issubject to to TTTT Electronics' ownown datadata andand is considered accurate at time going to print. Allinformation information subject electronics' is considered accurate at of time of going to print. 100 (c) plcplc (c) TT TTElectronics electronics 201-500 101-200 DCD FDG ABBC FFGG 100 5 20 50 Welwyn 20 5 www.ttelectronics.com/resistors www.welwyn-tt.com BC FG DD FG J J B BC CD DF FG G 25 5 50 20 25 11.17 11. 13 Surface Mount SOIC Surface Mount SOIC Resistor Networks Resistor Networks SOIC Series SOIC Series N (4.902 0.102) (8.661 0.102) (9.906 0.102) (10.211 0.102) (12.751 0.102) E H A 1 2 3 0.050" Typ (5.994 0.203) (10.312 0.203) (3.886 0.102) (7.493 0.102) (1.626 0.102) (2.540 0.102) (0.191 0.254) (0.279 0.051) Note: N = number of pins (8, 14, 16) D A C 0.016" .002" 0 min / 8 max 0.007" 0.003" N N R1 2 1 3 Schematic A Isolated N % Of Rated Power 100 R1 1 .033"0.017 2 3 50 Schematic B Bussed Note: N = number of pins (8, 14, 16) 10 R1 1 2 25 3 Schematic B Bussed 70 125 Ambient Temperature (C) Note: N = number of pins (8, 14, 16) (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com General Note General Note TT Electronics reserves the right to make changes in product specification without notice or liability. TT information electronics reserves right to makeown changes in product specification orto liability. All is subjectthe to TT Electronics' data and is considered accuratewithout at time notice of going print. All information is subject to TT electronics' own data and is considered accurate at time of going to print. (c) TT Electronics plc (c) TT electronics plc SOIC Series Issue January 2009 Sheet 3 of 4 BI Technologies IRC Welwyn www.ttelectronics.com/resistors www.bitechnologies.com www.irctt.com www.welwyn-tt.com 11.17 11. 13 Surface Mount SOIC Resistor Networks SOIC Series Surface Mount Surface MountSOIC SOIC Resistor Networks Resistor Networks SOIC Series Ordering Data Prefix GUS - SS4A - 01 - 1002 - F B (Inclusion of Prefix is preferred but, historically, it may have been omitted.) Style, Schematic and Termination SS4A = SS4ALF = SS4B = SS4BLF = 8-pin SOIC-N, 4 Isolated Resistors; Sn/Pb terminations 8-pin SOIC-N, 4 Isolated Resistors; 100% tin (Pb-free) terminations 8-pin SOIC-N, 7 Bussed Resistors; Sn/Pb terminations 8-pin SOIC-N, 7 Bussed Resistors; 100% tin (Pb-free) terminations SS7A = SS7ALF = SS7B = SS7BLF = 14-pin SOIC-N, 7 Isolated Resistors; Sn/Pb terminations 14-pin SOIC-N, 7 Isolated Resistors; 100% tin (Pb-free) terminations 14-pin SOIC-N, 13 Bussed Resistors; Sn/Pb terminations 14-pin SOIC-N, 13 Bussed Resistors; 100% tin (Pb-free) terminations SS8A = SS8ALF = SS8B = SS8BLF = 16-pin SOIC-N, 8 Isolated Resistors; Sn/Pb terminations 16-pin SOIC-N, 8 Isolated Resistors; 100% tin (Pb-free) terminations 16-pin SOIC-N, 15 Bussed Resistors; Sn/Pb terminations 16-pin SOIC-N, 15 Bussed Resistors; 100% tin (Pb-free) terminations SL8A = SL8ALF = SL8B = SL8BLF = 16-pin SOIC-W, 8 Isolated Resistors; Sn/Pb terminations 16-pin SOIC-W, 8 Isolated Resistors; 100% tin (Pb-free) terminations 16-pin SOIC-W, 15 Bussed Resistors; Sn/Pb terminations 16-pin SOIC-W, 15 Bussed Resistors; 100% tin (Pb-free) terminations SL0A = SL0ALF = SL0B = SL0BLF = 20-pin SOIC-W, 10 Isolated Resistors; Sn/Pb terminations 20-pin SOIC-W, 10 Isolated Resistors; 100% tin (Pb-free) terminations 20-pin SOIC-W, 19 Bussed Resistors; Sn/Pb terminations 20-pin SOIC-W, 19 Bussed Resistors; 100% tin (Pb-free) terminations Absolute TCR Code 00 = 250ppm/C; 01 = 100ppm/C 02 = 50ppm/C; 03 = 25ppm/C Resistance Code 4-Digit Resistance Code Ex: 1002 = 10K, 50R1 = 50.1 (The USA style coding shown is preferred, but, historically, European style coding (e.g. 10K) may have been used.) Absolute Tolerance Code J = 5%; G = 2%; F = 1%; D = 0.5% C = 0.25%; B = 0.1% Optional Ratio Tolerance Code G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% Packaging Specify tubes or tape & reel. Tape and reel packaging is compliant with EIA-481-D: 8 mm through 200 mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. Tube packaging drawing detail available upon request. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com General Note General Note TT electronics Electronics reserves make changes in product specification without noticenotice or liability. TT reservesthe theright righttoto make changes in product specification without or liability. All information TTTT Electronics' own data andand is considered accurate at time of going to print. All informationisissubject subjecttoto electronics' own data is considered accurate at time of going to print. (c) TT plcplc (c) TT Electronics electronics SOIC Series Issue January 2009 Sheet 4 of 4 BI Technologies IRC Welwyn www.ttelectronics.com/resistors www.bitechnologies.com www.irctt.com www.welwyn-tt.com 11.17 11.13