R46KN333045N0M - KEMET Electronics Corporation

09/2008

155

Ø d ±0.05 p ≤15 22.5 ≤ p ≤ 27.5 p = 37.5

0.6 or 0.8* 0.8 1.0

*See size table.

All dimensions are in mm.

GENERAL TECHNICAL DATA

Dielectric: polypropylene lm.

Plates: metal layer deposited by evaporation under vacuum.

Winding: non-inductive type.

Leads: tinned wire.

Protection: plastic case, thermosetting resin lled.

Box material is solvent resistant and ame retardant according to

UL94 V0.

Marking: Manufacturer’s logo, series, capacitance, tolerance,

rated voltage, capacitor class, dielectric code, climatic category,

passive ammability category, manufacturing date code, approvals,

manufacturing plant.

Climatic category: 40/110/56 IEC 60068-1

Operating temperature range: -40 to +110°C

Related documents: IEC 60384-14, EN 60384-14.

ELECTRICAL CHARACTERISTICS

Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc

Capacitance range: 0.022µF to 10µF

Capacitance values: E6 series (IEC 60063 Norm).

Capacitance tolerances (measured at 1 kHz):

±10% (K); ±20% (M).

tolerance ±5% (J) available upon request

Dissipation factor (DF):

tgδ 10-4 at +25°C ±5°C: ≤15 (8)* at 1kHz

* Typical value

Insulation resistance:

Test conditions

Temperature: +25°C±5°C

Voltage charge time: 1 min

Voltage charge: 100 Vdc

Performance

≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF

≥30000 s (150000 s )* for C>0.33µF

* Typical value

Test voltage between terminations (on all pieces):

1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C

R.46 SVERSION

X2 CLASS (IEC 60384-14) - MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

SELF-HEALING PROPERTIES

Typical applications: This special R46 release is designed

for applications in series with the main .

PRODUCT CODE: R46

Pitch Box thickness (B) Maximum dimensions (mm)

(mm) (mm) B max H max L max

10.0 All B +0.2 H +0.1 L +0.2

15.0 <7.5 B +0.2 H +0.1 L +0.3

15.0 ≥7.5 B +0.2 H +0.1 L +0.5

22.5 All B +0.2 H +0.1 L +0.3

27.5 All B +0.2 H +0.1 L +0.3

37.5 All B +0.3 H +0.1 L +0.3

TEST METHOD AND PERFORMANCE

Damp heat, steady state:

Test conditions 1st

Temperature: +40°C ± 2°C

Relative humidity (RH): 93% ±2%

Test duration: 56 days

Test conditions 2nd

Temperature: +60°C ± 2°C

Relative humidity (RH): 95% ±2%

Test duration: 500 hours

Test conditions 3rd

Temperature: +40°C ± 2°C

Relative humidity (RH): 93% ±2%

Test duration: 500 hours

Voltage value: 230 Vac, 50 Hz

Performance

Dielectric strength: no dielectric breakdown or

ashover at 4.3 x VR (d.c.)/1 min

Capacitance change |∆C/C|: ≤5%

Insulation resistance: ≥50% of initial limit.

Endurance:

Test conditions

Temperature: +110°C ± 2°C

Test duration: 1000 h

Voltage applied: 1.25 x VR +1000Vac 0.1 s/h

Performance

Dielectric strength: no dielectric breakdown or

ashover at 4.3 x VR (d.c.)/1 min

Capacitance change |∆C/C|: ≤10%

Insulation resistance: ≥50% of initial limit.

Resistance to soldering heat:

Test conditions

Solder bath temperature: +260°C ± 5°C

Dipping time (with heat screen):10 s ± 1 s

Performance

Capacitance change |∆C/C|: ≤2%

Loose Taped

Fig.1 Fig.2

09/2008 156

Rated Cap.

(*)

275 Vac / 560 Vdc

Std dimensions

Ø d Max

dv/dt at

390Vdc

Part Number

B H L p (V/ µs)

0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - S0 -

0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - S0 -

0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - S0 -

0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - S0 -

0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - S1 -

0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - S0 -

0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - S1 M

0.10 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3100 - - S0 -

0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - S1 M

0.15 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3150 - - S0 -

0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - S3 -

0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - S1 M

0.22 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3220 - - S0 -

0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - S2 -

0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - S3 -

0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - S1 -

0.33 µF 8.5 14.5 18.0 15.0 0.8 400 R46 KI 3330 - - S3 M

0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - S0 -

0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - S2 -

0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - S0 -

0.47 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - S1 M

0.56 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - S0 -

0.68 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - S0 M

0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - S0 -

0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - S1 M

0.33 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3330 - - S0 -

0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - S1 M

0.47 µF 8.5 17.0 26.5 22.5 0.8 200 R46 KN 3470 - - S0 -

0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - S0 -

1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - S2 M

1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - S1 -

1.2 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4120 - - S0 -

0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - S0 -

0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - S1 -

1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - S1 -

1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - S1 -

2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - S2 -

3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - S2 -

4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - S2 -

1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - S1 -

2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - S2 M

2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - S1 -

3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - S1 -

4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - S2 M

4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - S1 -

6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - S2 -

10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - S1 -

R.46 SVERSION

X2 CLASS (IEC60384-14) - MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

SELF-HEALING PROPERTIES

Table 1

Standard

packaging style

Lead

length

(mm)

Taping style Ordering

code

(Digit 10 to 11)

(mm)

Fig.

(No.)

Pitch

(mm)

AMMO-PACK

12.70

19.05

10.0/15.0

22.5

REEL Ø500mm

12.70

19.05

10.0/15.0

22.5/27.5

Loose, short leads

Loose, long leads

04 +2

25 -1/+2

30 +5

Loose, insulated

rigid leads

Loose, insulated

exible leads

30 +5

150 ±5

(**) ENEC mark has replaced all the following European

National marks:

APPROVALS

Rated voltage (K=275Vac)

Mechanical version and packaging (Table 1)

Tolerance: K (±10%); M (±20%)

300Vac Available upon request

E12 Series available upon request

All dimensions are in mm

(**)

ENEC

IEC 60384-14 Class X2 File No.V4413

UL 1414

(up to 1µF, 85°C;

250Vac)

Across-the-line File No.E97797

CSA - C22.2 No.1

(up to 1µF, 85°C;

250Vac)

Across-the-line

certied for

Canada

File No.E97797

UL 1283

(310 Vac)

Electromagnetic

Interference

Filters

File No.E85238

CSA - C22.2 No.8

(310 Vac)

Electromagnetic

Interference

Filters certied

for Canada

File No.E85238

GB/T 14472 Class X2 File CQC03001008199

CQC03001008842

Approved according to IEC 60384-14

According to IEC 60065

Note: Ammo-pack is the preferred packaging for taped version.