703
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
R10 series
General Purpose
Dry Circuit to 7.5 Amp
Multicontact AC or DC Relay
• R10-E – Clear Dust Cover Version
• R10-R – Sealed, Immersion Cleanable Type
• R10S – Super Sensitive, Logic Compatible
Coil Data @ 25°C (also see Coil Data tables)
Voltage: 3 to 115VDC and 6 to 115VAC.
Maximum Coil Power: 2.2 Watts.
Coil Temperature Rise: 30°C per Watt.
Maximum Coil Temperature: 105°C.
Operate Data @ 25°C
Initial Dielectric Strength
Between Open Contacts: 500V rms, for contact codes P and Z.
1,000V rms for contact codes W, X and Y with
coil code V.
Between All Other Conductors: 1,000V rms.
R10 Relays (DC Only) Typical Ranges of Operations
R10 R10SR10-R
Features
• Broad range of coil options provide sensitivity ranging from 25 to 750mW.
• Various contacts switch from dry circuit to 7.5 amps.
• Many mounting and termination options.
File E29244
File LR15734
Capacitance
Between Contacts: 2 pf, typ.
Between Contacts and Coil: 2 pf, typ.
Between Coil and Frame: 30 pf, typ.
Initial Insulation Resistance
Between Mutually Insulated Elements: 1010 ohms @ 25°C, 50% RH.
Consult factory for optional acetal resin material rated 1012 ohms.
Environmental Data
Storage Temperature Range: -55°C to +105°C.
Operating Temperature Range: -55°C to +75°C.
Mechanical Data
Terminal Finish: Tin plating standard.
Weight: 0.8 to 1.4 oz. (23 to 40g) approximately.
R10 Ultra-Sensitive "SS" and "JJ" Typical Ranges of Operation
Multiple of Max. Pull-In Voltage or Current
Operate Time (Milliseconds)
Release Time (Milliseconds)
(Curves for reference only. If specific
values are required, testing is required.)
Typical Operate
and Release Times
(all contact configurations)
Release Time
(no suppression)
50
40
30
20
10
1.0 1.5 2.0 3.0 4.0
10
8
6
4
2
Operate Time
Operate Time
Multiple of Max. Pull-In Voltage or Current
Operate Time (Milliseconds)
Release Time (Milliseconds)
30
(Curves for reference only. If specific
values are required, testing is required.)
25
20
15
10
Release Time
(no suppression)
5
Typical Operate
and Release Time
(all contact configurations)
12
10
8
6
4
2
1.0 1.33 1.5 2.0 2.5 3.0
Contact Data @ 25°C
Arrangements: 1 Form C (SPDT) through 8 Form C (8PDT) See Ordering
Information tables for more details regarding availability.
Contact Materials, Styles & Ratings @ +25°C
Contact Contact Contact Coil Codes Contact Ratings
Code Material Style Available Min. Typ. Max.
W Silver-Cadmium Oxide Single Button V, Q, S, J 500mA - 7.5A‡
X Silver-Cadmium Oxide Single Button V, Q, S, J 500mA - 5A§
Y Fine Silver Single Button All 100mA 2A 3A
Z Fine Silver Bifurcated All 1mA 100mA 2A
P Gold overlay on Silver Bifurcated Crossbar All Dry Circuit 1mA 3A
Ratings are at 28VDC or 155VAC unless otherwise specified. Total load must not
exceed 30A per relay.
‡ Use ungrounded frame for AC loads of 5A or greater. Max.ratings are 7.5A at 115VAC and
4A at 28VDC for coil codes S and J.
§ Use ungrounded frame for AC loads of 5A or greater. Max.ratings are 5A at 115VAC and 3A
at 28VDC for coil codes S and J.
UL Horsepower Contact Ratings (Coil Code V Only)
Contact Code No. of Poles At 110-120VAC At 220-240VAC
W 1, 2, 4 1/8 HP (3.8A) 1/6 HP (2.2A)
X 1, 2, 4, 6 1/20 HP (1.5A) 1/10 HP (1.5A)
Expected Mechanical Life: 100 million operations, typical. (Except contact
Code W: 1,000,000 operations, typical.)
Typical Expected Life For Resistive Loads @ 25°C
Type Current Voltage Contact Style Coil Code Operations††
R10 7.5A 120VAC, 60 Hz. W V,S,J 7.5 · 104
R10 7.5A 28VDC W V 7.5 · 104
R10 5.0A 120VAC, 60 Hz. X V,S,J 5 · 104
R10 5.0A 28VDC X V 5 · 104
R10 4.0A 28VDC W S,J 2 · 104
R10 3.0A 28VDC X S,J 2 · 104
R10 3.0A 28VDC or 120VAC P V,S,J 3 · 104
R10 2.0A 28VDC P,Y,Z V 1.5 · 106
R10 2.0A 28VDC P,Y,Z S,J 6 · 105
R10S 2.0A 28VDC P,Y,Z J 5 · 105
R10 1.0A 28VDC P,Y,Z V,S,J 12 · 106
R10 1.0A 28VDC P,Y,Z SS,JJ 5 · 105
R10S 1.0A 28VDC P,Y,Z J 1 · 106
R10 500mA 28VDC P,Y,Z SS,JJ 5 · 106
R10 100mA 28VDC or 120VAC P,Y,Z V,S,J 1 · 108
R10 100mA 48VDC P,Z SS,JJ 5 · 106
R10 100mA 6VDC P SS,JJ 5 · 107
R10S 100mA 28VDC or 120VAC P,Y,Z J 1 · 106
R10 50mA 6VDC P,Z V,S,J 5 · 107
R10S 30mA 6VDC P,Z J 5 · 106
R10 1mA 6VDC P SS,JJ 5 · 107
†† Relay operated at rated coil voltage or 133% of pick-up current or higher.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
704 Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
P&B
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Coil Data Tables @ 25°C
One of the boldface resistance or voltage values from a table below is to be inserted in step 6 of the ordering chart on the next page.
Typical Coil Inductance
Coil Inductance (Henrys)
Coil Resistance (Ohms)
500
100
50
10
1.0
0.5
0.110 50 100 500 1K 5K 10K 100K
Armature (open)
Armature (closed)
Standard AC Operated Relays
Coil Resistance
@ 25°C ± 20% (ohms) Volts AC @ 25°C
Pick-Up Maximum
2 & 4 Form C 6 & 8 Form C (max.) Nominal Continuous
25 15 5.0 67.2
120 90 9.0 12 14.5
500 350 18.0 24 30.0
2.0K 1.4K 36.0 48 60.0
9.0K 7.5K 86.0 115 130.0
Note: Dual coil diode rectified construction.
SS Ultra-Sensitive Voltage Adjustment
(1-4 Pole Only)
2.2 Watts Maximum Continuous Coil Dissipation @ 25°C
Coil Resistance
VDC at 25°C at 25°C ± 10% (ohms)
1 Form C 2 Form C 3 & 4 Form C,
Pick-up Pick-up Pick-up
Nominal Pick-up Power Power Power
(Max.) 20mW 40mW 80mW
3.0 2.25 220 110 52
5.0 3.75 700 350 175
6.0 4.5 1.0K 500 250
12.0 9.0 4.0K 2.0K 1.0K
18.0 13.5 9.0K 4.5K 2.2K
24.0 18.0 15.0K 7.5K 3.7K
36.0 27.0 30.0K 15.0K 7.5K
48.0 36.0 — 30.0K 15.0K
Q Special DC Voltage Adjustment
1 & 2 Form A, B, C or D 3 & 4 Form A, B, C or D
Coil Res. Pick-up Coil Res. Pick-Up Nominal
@ 25°C (Max.) Pick-up @ 25°C (Max.) Pick-Up Voltage
± 10% @ 25°C@ 25°C± 10% @ 25°C@ 25°C@ 25°C
(ohms) (VDC) (mW) (ohms) (VDC) (mW) (VDC)
52 3.1 180 32 3.8 450 5
110 4.5 185 52 4.2 340 6
450 9.2 190 185 8.4 380 12
1.8K 17.4 170 1.0K 17.2 295 24
7.5K 36.2 175 3.2K 31.1 300 48
15.0K 49.5 165 7.5K 49.3 325 72
30.0K 67.5 160 15.0K 67.5 300 115
S Sensitive DC Voltage Adjustment
2.2 Watts Maximum Continuous Coil Dissipation @ 25°C
Coil Resistance
VDC at 25°C at 25°C ± 10% (ohms)
1 & 2 Form 3 & 4 Form A, 6 Form A, 8 Form A,
A, B, C or D B, C or D B or C B or C
Nominal Pick-up Pick-up Pick-up Pick-up Pick-up
(Max.) 100mW 175mW 250mW 400mW
3.0 2.25 50 30 20 12
5.0 3.75 140 80 56 35
6.0 4.5 200 110 80 52
12.0 9.0 800 450 320 200
24.0 18.0 3.2K 1.8K 1.2K 800
48.0 36.0 13.0K 7.5K 5.2K 3.2K
72.0 54.0 28.0K 16.0 13.0K 7.5K
115.0 86.0 50.0K 40.0K 30.0K 16.0K
JJ Ultra-Sensitive Current Adjustment
(1-4 Pole Only)
Maximum Pick-Up Current (mA)
Coil 1 Form C 2 Form C 3 & 4 Form C Maximum
Resistance Pick-Up Pick-Up Pick-Up Continuous
at 25°C Power Power Power Coil Current
±10% 20mW 40mW 80mW (mA)
1.0K 4.5 6.5 9.0 45.0
2.5K 2.9 4.1 5.8 28.0
5.0K 2.1 2.9 4.1 20.0
10.0K 1.5 2.0 3.0 14.0
15.0K 1.2 1.7 2.4 11.5
30.0K 0.85 1.2 1.7 8.3
J Sensitive DC Current Adjustment
Must Operate Current (mA)
All Applicable Types Except R10S
Coil 2 Form A, 4 Form A, 6 Form A, 8 Form A, Max.
Resistance B, C or D B, C or D B, C or D B or C Coil
±10% Pick-up Pick-up Pick-up Pick-up Current
(ohms) 85mW 175mW 250mW 400mW (mA)
1.0K 8.5 13.0 16.0 20.0 45.0
2.5K 5.8 8.4 10.0 13.0 28.0
5.0K 4.1 6.2 7.2 9.0 20.0
10.0K 3.1 4.5 5.0 6.4 14.0
15.0K 2.6 3.5 4.2 5.3 11.5
30.0K 1.7 2.5 2.9 3.7 8.3
R10S Types Only
Coil 1 2 4
Resistance Form C Form C Form C
±10% Pick-up Pick-up Pick-up
(ohms) 10mW 20mW 40mW
500 4.5 (A) 6.3 (A) 9.0
1.0K 3.2 (A) 4.5 6.5
2.5K 2.0 2.9 (B) 4.1 (B)
5.0K 1.4 (B) 2.0 2.9 (C)
10.0K 1.0 1.4 (C) 2.0
16.0K 0.8 1.2 1.4
30.0K 0.6 (C) 0.8 1.2
(A) Suggested for 5VDC operation.
(B) Suggested for 12VDC operation.
(C) Suggested for 24VDC operation.
V Standard DC Voltage Adjustment
2.2 Watts Maximum Continuous Coil Dissipation @ 25°C
Coil Resistance
VDC at 25°C at 25°C ± 10% (ohms)
1, 2 & 4 Form 6 Form A, 8 Form A,
A, B, C or D B or C B or C
Nominal Pick-up Pick-up Pick-up Pick-up
(Max.) 500mW 850mW 1000mW
3.0 2.25 10 6 5
5.0 3.75 28 16 14
6.0 4.5 52 25 20
12.0 9.0 185 90 72
24.0 18.0 700 430 350
48.0 36.0 2.5K 1.5K 1.25K
72.0 54.0 5.8K 3.5K 2.8K
115.0 86.0 15.0K 9.0K 8.0K
705
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
Our authorized distributors are more likely to stock the following items for immediate delivery.
R10-E1P2-115V
R10-E1P2-V700
R10-E1P4-115V
R10-E1P4-V700
R10-E1W2-V185
R10-E1W2-V700
R10-E1W4-V185
R10-E1W4-V700
R10-E1X2-115V
R10-E1X2-24V
R10-E1X2-S800
R10-E1X2-V185
R10-E1X2-V700
R10-E1X4-115V
R10-E1X4-V185
R10-E1X4-V2.5K
R10-E1X4-V700
R10-E1X6-V430
R10-E1Y2-J1.0K
R10-E1Y2-J2.5K
R10-E1Y2-V15.0K
R10-E1Y2-V185
R10-E1Y2-V2.5K
R10-E1Y2-V700
R10-E1Y4-J10.0K
R10-E1Y4-V2.5K
R10-E1Y4-V52
Ordering Information
Typical Part Number BR10 -E 1 Y 4 -V700
1. Basic Series:
R10 = Relay with Form C contacts.
R10S = Super sensitive R10 (case and terminals E1 & E2 only, J coil adj. only).
2. Case Style:
E = Non-sealed polycarbonate cover.
R = Immersion cleanable, tape sealed plastic case (R10 only [Form C], terminal code 2 & 9 only [std. PCB]).
No ground or stud included. Not available on R10S.
3. Terminals & Mounting:
1 = Solder/plug-in terminals with #3-48 mounting stud.
2 = Printed circuit terminals (std.) .064” (1.62mm) clearance, 1.25” (31.75mm) seated ht.
6 = Side mounting plate with #6-32 stud, solder/plug-in terminals (#3-48 stud not included).
7 = Narrow (.04” [1.02mm] wide) printed circuit terminals .013” (.33mm) clearance, 1.2” (30.48mm) seated ht.
9 = Non-shouldered, narrow (.04” [1.02mm] wide) printed circuit terminals in a staggered arrangement (1 to 6 poles only).
4. Contact Style & Rating:
WX Y Z P
Single Contact Single Contact Single Contact Bifurcated, Low Bifurcated Crossbar,
V, Q, S & J Coil Adjustment Only Level Contacts Dry Circuit Contacts
Typ. 2A Typ. 100mA Typ. 1mA
Max. 7.5A† Max. 5A‡ Max. 3A Max. 2A Max. 3A
Min. 500mA Min. 500mA Min. 100mA Min. 1mA Min. Dry Circuit
R10XXXXX
R10S X X X
Ratings are at 28VDC or 115VAC. Total load must not exceed 30A per relay.
† Use ungrounded frame for AC loads of 5A or greater. Max. ratings are 7.5A at 115VAC and 4A at 28VDC for coil codes S & J.
‡ Use ungrounded frame for AC loads of 5A or greater. Max. ratings are 5A at 115VAC and 3A at 28VDC for coil codes S & J.
5. Number of Poles:
1 = 1 pole. 4 = 4 pole
2 = 2 pole. 6 = 6 pole (not available with W contacts).
3 = 3 pole. 8 = 8 pole (available on case style E only; not available with W contacts).
6. Coil (Refer to Coil Data Tables):
AC Voltage (available on R10 only) DC Voltage
Specify nominal coil voltage followed by V (example: 24V). Specify coil adjustment code letter followed by coil resistance (example: V700).
R10-E1Y4-V700
R10-E1Y6-V1.5K
R10-E1Z2-V185
R10-E1Z2-V700
R10-E1Z4-V185
R10-E1Z4-V2.5K
R10-E1Z4-V700
R10-E1Z6-V1.5K
R10-E1Z6-V430
R10-E2P4-V185
R10-E2P4-V700
R10-E2W2-V185
R10-E2X2-V185
R10-E2X2-V700
R10-E2X4-V185
R10-E2X4-V700
R10-E2Y2-V185
R10-E2Y2-V700
R10-E2Y4-V185
R10-E2Y4-V700
R10S-E1Y2-J5.0K
R10S-E2Y1-J1.0K
706 Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
P&B
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Outline Dimensions
Suggested Panel Cutout For Relay or Socket
Wiring Diagrams (Bottom Views)
Mounting Hole Layout
For Terminal & Mounting
Style 6
Solder Terminal Dimensions
PC Terminal Dimensions
A B C D Arrang.
Type 2 .131 .050 .064 1.251 Inline
Type 7 .131 .040 .013 1.20 Inline
Type 9 .170 .040 .000 1.187 Staggered
Thickness .012 012 .012 .013 –––
D
(TO TOP OF CASE)
B
A
C
R10 Wiring Diagrams
Suggested PC Board Layouts (Component Side of Boards)
Terminal Types E2 & R2 Terminal Types E9 & R9
.437
(11.10)
.187 ± .002 DIA.
(4.75 ± .05)
.147 ± .0 02 DIA.
(3.73 ± .05)
▼
▼
DUAL
COIL
R10-AC Wiring Diagram
.012
(.30)
.040
(1.02)
.090
(2.29)
.080
(2.03)
.735 MAX.
(18.67)
1.187 MAX.
(30.15)
R10S: 1.50 MAX.
(38.1)
.406
(10.31)
.135
(3.43)
.210
(5.33)
3-48 THREAD
NIB .091 DIA. x .020 HIGH
(2.31) (.51)
}
TYPE E1 ONLY
.354
(8.99)
#6-32
THREAD
.375
(9.53)
.171
(4.43)
.156
(3.96)
CASE R ONLY
Recommend tape tab
be removed after
immersion cleaning
and before relay is put
in service. Peel off to
permit proper relay
ventilation.
2 POLE .950 MAX.
(24.13, 2 POLE 1R10)
4 POLE 1.165 MAX.
(29.59, 4 POLE 1R10)
6 POLE 1.375 MAX.
(34.93)
8 POLE 1.580 MAX.
(40.13)
.437
(11.10)
.59 REF.
(15.0)
STUD ON NARROW
SIDE ONLY
CASE E
ONLY
TYPE E6 ONLY
.085 MAX.
(2.16)
TYPE E6 ONLY
.210
(5.33)
.320
(8.13)
.110
(2.79)
.450
(11.43)
.550
(13.97)
.420
(10.67)
.530
(13.46)
.400
(10.16) .630
(16.00)
.740
(18.80)
HOLES
+ .004
- .000
+ .10
- .00
DIA.
.056
1.4 2
( )
.500
(12.70)
.10 0
(2.54)
GRID
.500
(12.70)
.450
(11.43)
6
POLE
2
POLE
4
POLE
.150
(3.81) .10 0
(2.54)
+ .004
- .000
+ .10
- .00
( )
.056
1.42
HOLES
DIA.
.281 ± .015
(7.14 ± .38)
.140
(3.56)
X
.354
(8.99)
.281
(7.14)
+ .005
– .000
+ .13
– .00
.109
2.77
2 HOLES
DIA.
( )
.656 ± .015
(16.66 ± .38)
2 POLE – .343 ± .020
(8.71 ± .51)
4 POLE – .562 ± .020
(14.27 ± .51)
6 POLE – .781 ± .020
(19.84 ± .51)
8 POLE – 1.000 ± .020
(25.40 ± .51)
X =
TOLERANCE: ± .010
(± .25)
26 27 14
1 POLE
8 9 5
10 6 7
4 3 2 1
2 POLE
8 9 5
10 6 7
4 3 2 1
3 POLE
4 3 2 1
4 POLE
4 3 2 1
14 15 8
16 9 10
11 12 5
13 6 7
14 15 8
16 9 10
11 12 5
13 6 7
6 POLE
4 3 2 1
19 9 10
20 21 11
14 15 5
17 18 8
8 POLE
4 3 2 1
22 12 13
16 6 7
22 9 10
23 24 11
17 18 5
20 21 8
25 12 13
19 6 7
28 15 16
707
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
.350
(8.89)
.032
(.81)
CLEARANCE HOLE FOR
RELAY MNTG. STUD &
GROUNDING SPRING
.235
(5.97)
.330
(8.38)
.120 DIA. HOLE
(3.05)
.165
(4.19)
.312
(7.92)
.519
(13.18)
.725
(18.42)
.931
(23.65)
2 POLE
4 POLE
6 POLE
8 POLE
.065
(1.65)
.210
(5.33)
.090
(2.29)
.625
(15.88)
.045 x .090
(1.14 x 2.28)
A
B
TOLERANCES
UNLESS OTHERWISE SHOWN
±.010
± .25
( )
2 POLE .978 (24.84)
4 POLE 1.184 (30.07)
6 POLE 1.390 (35.31)
8 POLE 1.546 (40.54)
.750
(19.05)
.175
(4.45)
Suggested Panel Cutout
Suggested Board Layout (Component Side)
37D645 – Mounting Strip
Strip of .060” (1.52mm) aluminum contains ten pre-punched, breakaway
mounting plates. Each plate accomodates a 2, 4, 6 or 8 pole solder terminal
R10 relay or socket to facilitate chassis- or rack mounting.
Socket Specifications
Contact Material:
Spring brass, tin-plated.
Body Material: 2 and 4 pole: polyester.
6 and 8 pole: phenolic.
Voltage Drop: 30mV max. @ 10A.
Dielectric Strength: 1,000V rms.
Insulation Resistance: 109 megohms.
Max. Current: 10A.
Solder or PC Terminal Sockets
Rugged, molded socket body retains floating
terminals of either solder or printed circuit pin
configuration. PC terminal sockets are offered
with pins in either 0.1” (2.54mm) grid or in-line
arrangement.
Grounding Provisions
Pre-installed on sockets
Not for use at 5A AC and above.
Grounding Strip: Mounting stud of relay
contacts grounding strip. Grounding strip is
grounded with screw or rivet through round hole
in socket.
Grounding Terminal (PC sockets only):
Mounting stud of relay contacts ground terminal
through square hole in socket.
Caution:
Printed circuit sockets are manufactured with
“floating” (loose) terminals. This permits them to
align with holes in the circuit board and with the
relay terminals. During the mounting and
soldering of the socket, vertical float should be
eliminated and the terminals seated on the board.
(This may be accomplished by inserting a dummy
relay in the socket.) Failure to eliminate float may
cause fracture of the solder joint or separation of
the copper conductor from the printed circuit
board when a relay is inserted in the socket after
soldering.
Solder & PC Terminal Socket Outline Dimensions
“A” = .109 DIA.
(2.77)
.180
(4.57)
.090
(2.29)
.16
(4.1)
.32
(8.1)
“A” “A”
++ ++
1.13 5
(28.83)
2.50
(63.5)
2.000
(50.80)
.535
(13.59)
.25
(6.4)
1.205
(30.61)
.13
(3.3)
1.205
(30.61) .090 R.
(2.29)
Hold Down Spring Hold Down Strap
(PC Sockets Only)
R10 Socket & Accessory Information
Strip Terminal
All tolerances ±.010 (±.25) unless otherwise noted.
2 POLE .343 (8.71)
4 POLE .562 (14.27)
6 POLE .781 (19.84)
8 POLE 1.000 (25.40)
.281 ± .015
(7.14 ± .38)
.354
(8.99)
.140
(3.56)
.656 ± .015
(16.66 ± .38)
.281
(7.14)
++ 2 HOLES
.109 DIA.
(2.77)
Suggested Board Layout (Component Side)
.500
(12.70)
.10 0
(2.54)
GRID
.500
(12.70)
.450
(11.43)
8
POLE
6
POLE
2
POLE
4
POLE
.150
(3.81
)
.10 0
(2.54)
+ .004
- .000
+ .10
- .00
( )
.056
1.42
HOLES
HOLE FOR GROUND
TERMINAL (IF REQ’D.)
DIA.
.210
(5.33)
.320
(8.13)
.110
(2.79)
.450
(11.43)
.550
(13.97)
.420
(10.16)
.530
(13.46)
.400
(10.16)
.450
(11.43)
.150
(3.81)
.050 DIA.
(1.27)
1 HOLE
+ .004
- .000
+ .10
- .00
.056
1.42
( )
DIA. HOLES
PC Socket Dim. A Dim. B
Term. Length
.180” .180 .115
(4.57) (2.92)
.210” .210 .156
(5.33) (3.96)
Ordering Data – Stock items are boldfaced.
Socket No. of Type of Grounding
Part No. Poles Terminal Provision
27E125 2 Strip
27E126 4 Strip
27E127 6 Solder Strip
27E162 2 None
27E163 4 None
27E164 6 None
27E128 2 Strip
27E129 4 Strip
27E130 6 Strip
27E254 8 Strip
27E212 2 PC Stag. None
27E213 4 .180” long None
27E271 6 (4.57mm) None
27E258 8 None
27E193 2 Terminal
27E194 4 Terminal
27E636 2 PC Stag. Strip
27E637 4 .210” long Strip
(5.33mm)
27E631 2 Strip
27E632 4 Strip
27E340 6 PC In-line Strip
27E342 2 .180” long None
27E629 4 (4.57mm) None
27E630 6 None
27E338 4 Terminal
27E633 2 PC In-line Strip
27E634 4 .210” long Strip
27E635 6 (5.33mm) Strip
Hold Downs For Use With R10 Sockets
Part No. No. of
Poles Description
20C249 2 Wire Hold Down Spring
20C250 4 Wire Hold Down Spring
20C251 6 Wire Hold Down Spring
20C266 8 Wire Hold Down Spring
20C259 All Wire Hold Down Strap (PC only)
20C300 2 (R10S) Hold Down Spring
20C301 4 (R10S) Hold Down Spring
See following page for additional sockets & accessories.
708 Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
P&B
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
R10 Socket & Accessory Information (Continued)
.175 REF.
(4.45)
.780 MAX.
(19.81)
2 MTG. HOLES
.147 DIA.
(3.73)
.187 ± .010
(4.75 ± .25)
2 HOLES
.147 DIA.
(3.73)
.065
(1.65)
.045 x .090
(1.14 x 2.28)
SLOT IN TERMINALS
.210
(5.33)
.320 REF.
(8.13)
AB
.687
(17.45)
.25
(6.35)
C
SUGG
CHASSIS
CUTOUT
2 Pole
Terminal Wiring Code
+
6
2
1
+
10
3
4
7
59
8
BA
C
1.375 ± .010
(34.93 ± .254)
.530 MAX.
(13.46)
.062 ± .007
(1.57 ± .178)
2.75 ± .015
(69.85 ± .381)
#6-32 SCREWS .100
(2.54)
(2) MTNG. HOLES
.187 DIA.
(4.75)
+++
+++
+++
+++
6 Pole
Terminal Wiring Code
+++
+++
+++
+++
+++
+++
+
+
9
13
11
10
8
7
5
6
15
1
2
12
21
22
20
19
17
16
14
18
4
3
4 Pole
Terminal Wiring Code
+++
+++
+++
+++
+++
+
+
16
14
13
4
3
15
11
12
9
10
5
6
1
2
7
8
.187 MIN.
(4.75)
27EXXX
PC BOARD
SUGGESTED STANDOFF
(CUSTOMER SUPPLIED)
OR INSULATOR (40G432)
.375 (9.53) DIA. MIN; .625 (15.88) DIA.
MAX.
CHASSIS
40G432
INSULATOR
1.12L x .41W x .26H
(28.4 x 10.4 x 6.60)
1.375
(34.93)
.187 MIN.
(4.75)
27EXXX
PC BOARD
24A110
TRACK
24A071
MOUNTING CLIP
Suggested Track Mounting Suggested Chassis Mounting
Ordering Data – Stock items are boldfaced.
Socket No. of Type of Grounding
Part No. Poles Terminal Provision
27E317 2 Solder/ Strip
27E152 4 Bracket Strip
Socket No. of Dim. A Dim. B Dim. C
Part No. Poles Nom. Max. Min.
27E446 2 1.437 1.822 .937
(36.50) (46.27) (23.80)
27E447 4 1.687 2.072 1.125
(42.85) (52.63) (28.58)
27E448 6 1.875 2.260 1.343
(47.63) (57.40) (34.11)
Part No. No. of Dim. A Dim. B Dim. C
Poles Nom. Max. Nom.
27E460 2 1.800 2.230 .200
(45.72) (56.64) (5.08)
27E461 4 2.125 2.830 .337
(53.98) (71.88) (8.56)
27E462 6 2.812 3.830 .494
(71.42) (97.28) (12.55)
See preceding page for hold down springs.
Bracket Mount Socket
Allows solder terminal relay to mount
flat on a chassis.
Flange Mount Socket
Solder terminal socket with tin-plated
terminals and grounding strip pre-
assembled on .065” (1.65mm) steel
mounting plate. Requires only one
chassis cutout.
Track Mount Socket
Provides front wiring, screw terminal
connections for R10 family relays. No
grounding provision.
X
.075
(1.91) .437
(11.10) .150
(3.81)
.058
(1.47)
MATERIAL
THICKNESS
.484
(12.29)
.156
(3.96)
.210 TYP.
(5.33)
.045 x .090 TYP.
(1.14 x 2.28) .437
(11.10)
TAPPED #6-32 THREAD
.85 MAX.
(21.6)
+
X= 2 POLE .978
(24.84)
4 POLE 1.184
(30.07)
