RP15-2412SFW/P - RECOM Power

15 Watt

2” x 1”

Single &

Dual Output

●4:1 Wide Input Voltage Range

●15 Watts Regulated Output Power

●1.6kVDC Isolation

●Over Current and Over Voltage Protection

●Six-Sided Shield

●No Derating to 65°C

●Standard 2” x 1” Package and Pinning

●Efficiency to 86%

Features

Regulated

Converters

Selection Guide 24V and 48V Wide Input Types

Part Number Input Output Output Input (4,5) Efficiency (6) Capacitive (7)

Range Voltage Current Current Load max.

VDC VDC mA mA % µF

RP15-243.3SFW 9-36 3.3 4500 60/773 84 14750µF

RP15-2405SFW 9-36 5 3000 60/777 86 7200µF

RP15-2412SFW 9-36 12 1250 75/771 85 1250µF

RP15-2415SFW 9-36 15 1000 75/762 86 800µF

RP15-483.3SFW 18-75 3.3 4500 30/422 84 14750µF

RP15-4805SFW 18-75 5 3000 30/381 86 7200µF

RP15-4812SFW 18-75 12 1250 40/385 85 1250µF

RP15-4815SFW 18-75 15 1000 40/381 86 800µF

RP15-2405DFW 9-36 ±5 ±1500 85/801 82 ±3600µF

RP15-2412DFW 9-36 ±12 ±625 100/771 85 ±625µF

RP15-2415DFW 9-36 ±15 ±500 100/762 86 ±400µF

RP15-4805DFW 18-75 ±5 ±1500 45/400 82 ±3600µF

RP15-4812DFW 18-75 ±12 ±625 50/385 85 ±625µF

RP15-4815DFW 18-75 ±15 ±500 50/381 86 ±400µF

* add /Pfor CTRL function with Positive Logic (1=ON, 0=OFF)

* add /Nfor CTRL function with Negative Logic (0=ON, 1=OFF)

* add suffix -HC for premounted heatsink and clips

Ordering Examples

RP15-2405SFW/P = 24V 4:1 Input, 5V Output, Positive Logic CTRL pin fitted

RP15-4805DFW-HC = 48V 4:1Input, ±5V Output, No CTRL pin, Heatsink fitted RP15-4805SFW

Description The RP15-FW series wide range input DC/DC converters are certified to UL 60950-1

and to cUL 60950-1. This makes them ideal for all telecom and industrial

applications where approved safety standards are required.

The industry standard 2” x 1” package meets military standards for thermal shock and

vibration tolerance.

Derating graphs are valid only for the shown

part numbers.

If you need detailed derating information about

a part number not shown here please contact

our technical customer service at

info@recom-development.at

125

100

Ambient Temperature Range (°C)

-40 -10 0 50 60 70 80 90 100

Output Power (%)

Natural Convection

-25 110

75Vin

Nom Vin

Please Read Application Notes

UL-60950-1 Certified

E196683

REV:0/2014 P-53

www.recom-international.com

RP15-FW

POWERLINE

DC/DC-Converter

with 3 year Warranty

RoHS

2011/65/EU

6/6

Derating Graph

(Ambient Temperature)

POWERLINE

DC/DC-Converter

RP15-S_DFW

Series

Specifications (typical at nominal input and 25°C unless otherwise noted)

Input Voltage Range 24V nominal input 9-36VDC

48V nominal input 18-75VDC

Input Filter Pi Type

Input Surge Voltage (100 ms max.) 24V Input 50VDC

48V Input 100VDC

Input Reflected Ripple (nominal Vin and full load) 20mAp-p

Start Up Time (nominal Vin and constant resistor load) 20ms typ.

Remote ON/OFF (1) DC-DC ON Open or 3.0V < Vr < 12V

DC-DC OFF Short or 0V < Vr < 1.2V

Remote OFF input current Nominal input 2.5mA

Output Power 15W max.

Output Voltage Accuracy (full Load and nominal Vin) ±1%

Minimum Load 0%

Line Regulation (low line, high line at full load) ±0.2%

Load Regulation (0% to 100% full load) Single ±0.5%

Dual ±1%

Cross Regulation Dual Output (asymmetrical 25% <>100%load) Dual ±5%

Ripple and Noise (20MHz bandwith, with 1µF MLCC on output) 3.3, 5.0V 50mVp-p

(measured with a 104pF ceramic across the output) 12, 15, ±5, ±12, ±15V 75mVp-p

Temperature Coefficient ±0.02%/°C max.

Transient Response (25% load step change) 250µs

Input Voltage Variation, dv/dt complies with ETS300 132, part 4.4 5V/ms

Over Load Protection (% of full load at nominal Vin) 150% typ

Overvoltage Protection (Single) Zener Diode Clamp

Undervoltage Protection See Application Notes

Short Circuit Protection Continuous, automatic recovery

Efficiency see „Selection Guide“ table

Isolation Voltage (rated for one minute) In to Out and I/O to case 1600VDC min.

Isolation Resistance 10 GΩmin.

Isolation Capacitance 1500pF max.

Operating Frequency 400kHz typ.

Operating Temperature Range 5.1, 12, 15, ±12, ±15V -40°C to +75°C

3.3, ±5V -40°C to +65°C

with derating -40°C to +105°C

Maximum Case Temperature +105°C

Storage Temperature Range -55°C to +125°C

Thermal Impedance (8) Natural convection 12°C/Watt

with Heatsink 10°C/Watt

Case Material Nickel plated copper

Base Material Non-conductive black plastic

Potting Material Epoxy (UL94-V0)

Weight 27g

continued on next page

RP15-FW

REV: 0/2014 www.recom-power.com

P-54

Specifications (typical at nominal input and 25°C unless otherwise noted)

POWERLINE

DC/DC-Converter

RP15-S_DFW

Series

Notes :

1. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.

Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SFW/P)

Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SFW/N).

If no suffix is specified, the control pin will be omitted.

2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).

3. RP15-24xxW meets Class A. RP15-48xxW requires 1µF MLCC across input to meet Class A.

An external capacitor (220µF/Low ESR) is required to meet EN61000-4-4 and -5

See application notes for Class B commom mode filter suggestion.

4. Typical value at nominal input voltage and no load.

5. Maximum value at nominal input voltage and full load

6. Typical value at nominal input voltage and full load.

7. Test by minimum Vin and constant resistor load.

8. Optional Heatsink Part Number 7G-0020-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips

(add suffix -HC). See Application Notes for heatsink details.

2” x 1” Package Style

Package Style and Pinning (mm)

20.30

50.80

dia.

1.0

10.20

12.70

15.20

Bottom View

2.50

5.10

25.40

5.6

10.20

Pin Pitch Tolerance ±0.35 mm

Pin Connections

Pin # Single Dual

1 +Vin +Vin

2 -Vin -Vin

3 +Vout +Vout

4 No Pin Com

5 -Vout -Vout

6* CTRL* CTRL*

* Optional. See Note 1.

Packing Quantity Refer to App Notes for tube dimensions 9 pcs per TubeC

onducted Emissions (3) EN55022 Class A

Radiated Emissions (3) EN55022 Class A

ESD EN61000-4-2 Perf. Critera B

Radiated Immunity EN61000-4-3 Perf. Critera A

Fast Transient (3) EN61000-4-4 Perf. Critera B

Surge (3) EN61000-4-5 Perf. Critera B

Conducted Immunity EN61000-4-6 Perf. Critera A

Thermal Shock MIL-STD-810D

Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z

Relative Humidity 5% to 95% RH

MTBF (2) Bellcore-TR-NWT-000332 2350 x 103hours

REV 01/2014 P-55

www.recom-international.com

RP15-FW

The product information and specifications are subject to change without prior notice. All products are designed for non-safety critical commercial and industrial applications.

The Buyer agrees to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life and/or damage property.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

RECOM:

RP15-2405DFW/P RP15-2405SFW/P RP15-2412DFW/P RP15-2412SFW/P RP15-2415DFW/P RP15-2415SFW/P

RP15-243.3SFW/P RP15-4805DFW/P RP15-4805SFW/P RP15-4812DFW/P RP15-4812SFW/P RP15-4815DFW/P

RP15-4815SFW/P RP15-483.3SFW/P