OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B.1 01/09
Page 1 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Near Infrared Light Ring Series
OPA80 and OPA83 Series
Ordering Information
OPA80 _ 5 _ Vcc 12 Volts, Light Ring with Daylight Light Sensor
OPA81 _ 5 _ Vcc 12 Volts, Light Ring with NO Daylight Light Sensor
OPA82 _ 5 _ Vcc 5 Volts, Light Ring with Daylight Light Sensor
OPA83 _ 5 _ Vcc 5 Volts, Light Ring with NO Daylight Light Sensor
W 5 Y Z
Type of Optical component Package = W Z =
Meets RoHS requirements
Through Hole - 3 mm package T3 Qty of LEDs
Surface Mount - SM Y = Ring Size ID & OD 12 Volt 5 Volt
A .625" ID & 1.25" OD 12 10
= 5 B 1.0" ID & 1.75" OD 18 16
C 1.25" ID & 2.0" OD 18 16
D 1.5" ID & 2.25" OD 24 20
Example: OPA80T35CZ
12 VDC power,
Light Ring with Daylight Lig ht Sensor,
Through Hole 3mm package,
IR - 850 nm center wavelength LED,
Ring Size = 1.25" ID & 2.0" OD with 18 LEDs
Near IR 850 nm center wavelength
Features
• Designed for Near Infrared wavelength Cameras
• Daylight Light sensor available
• Variety of ring sizes
• Surface Mount or Through Hole Emitters
Description:
The OPA80 through OPA83 seri es are designed to easily illuminate an area with infrared light for a variety of
uses including security cameras, spot lighting, etc..
The light ring can be purchased with an ambient light sensing device for minimal current drain during high
ambient light conditions. This is great for battery usage and for security came ras during daylight.
A choice of through hole and surface mount LED packages, near infrared wavelength and ring sizes are
available.
Custom mounting, electrical, cablin g and connectors are available. Contact your local repres entative or
OPTEK for more information.
Product Photo Here
RoHS
Applications include:
• Security camera lighting
• Spot lighting
• Flash lighting