SIDACtor (R) Protection Thyristors SLIC Protection Battrax(R) Series Positive/Negative - Modified DO-214 Description The Battrax(R) series offers programmable SIDACtor(R) overvoltage protection devices for SLIC applications. This series is offered in a negative Battrax version and a positive Battrax version. The B1xx0C_ is for a -VREF supply BOEUIF#$@JTGPSB 7REF supply. Designed using an SCR and a gate diode, the B1xx0C_ Battrax begins to conduct at |-VREF] ]7]XIJMFUIF#$@#BUUSBY CFHJOTUPDPOEVDUBU] 7REF] ]7] Features and Benefits t Low voltage overshoot Agency Approvals t Low on-state voltage Agency t Does not degrade with use Agency File Number ratings t Robust surge current ratings t Gate triggered tracking devices t Fails short circuit when surged in excess of E133083 Pinout Designation Applicable Global Standards PIN 3 (VREF) PIN 1 (Line) PIN 2 (Ground) Schematic Symbol t TIA-968-A t GR 1089 Intra-building t TIA-968-B t IEC 61000-4-5 t ITU K.20/21 Enhanced Level* t YD/T 1082 t ITU K.20/21 Basic Level t YD/T 950 t YD/T 993 t GR 1089 Inter-building* PIN 2 (Ground) PIN 3 (+VREF) *A-rated parts require series resistance PIN 1 (Line) PIN 3 (-VREF) Gate PIN 1 (Line) Positive Battrax B2050C_ Negative Battrax B1xx0C_ PIN 2 (Ground Electrical Characteristics Part Number B1100CALRP B1160CALRP B1200CALRP B2050CALRP B1100CCLRP B1160CCLRP B1200CCLRP B2050CCLRP Marking B10A B16A B12A B25A B10C B16C B12C B25C VDRM @lDRM=5A VS @100V/s IH IS IT VT @IT=2.2 Amps V min V max mA min mA max A max V max 100 160 200 5 100 160 200 5 100 100 100 50 100 100 100 50 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 4 4 4 4 4 4 4 4 I-VREF* I-VREF* I-VREF* * 7REF* I-VREF* I-VREF* I-VREF* * 7REF* *7* *7* *7* *7* *7* *7* *7* *7* I-VREF* I-VREF* I-VREF* * 7REF* I-VREF* I-VREF* I-VREF* * 7REF* *7* *7* *7* *7* *7* *7* *7* *7* pF Min 30 30 30 20 30 30 30 20 Max 200 200 200 200 200 200 200 200 - VREF Max Value for the negative Battrax is -200 V. - VREF Max Value for the positive Battrax is 110 V. * Off-state capacitance (CO) is measured across pins 1 & 2 at 1 MHz with a 2V bias. Notes: - Absolute maximum ratings measured at TA= 25C (unless otherwise noted). - Devices are uni-directional - All electrical characteristics shown are defined from Tip (pin 1) to Ground (pin 2), and Ring (pin 1) to Ground (pin 2) (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Capacitance* 114 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors SLIC Protection Surge Ratings Series IPP ITSM 50/60 Hz di/dt A min A min A/s max 45 75 20 500 100 200 50 500 2x10 2x10 2 8x20 1.2x50 2 10x160 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 A min A min A min A min A min A min A min A min A 20 150 150 90 50 75 75 C 50 500 400 200 150 200 175 0.2x310 0.5x700 2 1 1: Current waveform in s 2: Voltage waveform in s 1 1 1 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP $ *PP rating assumes VREFFRVBMT 7 - The device must initially be in thermal equilibrium with -40C < TJ < $ 1 Current waveform in s 2 Voltage waveform in s Thermal Considerations Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range UP C TS Storage Temperature Range UP C R0JA Thermal Resistance: Junction to Ambient 85 C/W Modified DO-214AA PIN 3 (VREF) PIN 1 (Line) PIN 2 (Ground) V-I Characteristics - Negative Battrax V-I Characteristics - Positive Battrax +I +I IT IGT IH VS VDRM VT IDRM -V IDRM -V +V +V VDRM VS VT IH IGT IT -I -I Normalized DC Holding Current vs. Case Temperature Normalized VS Change vs. Junction Temperature 2.0 10 IH 8 6 25 C 4 2 IH (TC = 25C) 12 Ratio of Percent of VS Change - % 14 0 -4 -6 1.8 1.6 1.4 25C 1.2 1.0 0.8 0.6 0.4 -8 -40 -20 0 -40 20 40 60 80 100 120 140 160 Junction Temperature (TJ) - C (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - C 115 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors SLIC Protection IPP - Peak Pulse Current - %IPP tr x td Pulse Waveform Peak Value 100 Environmental Specifications tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value High Temp Voltage Blocking 80% Rated VREF Max. (VDC Peak $PS $ PSIST.*-45% .FUIPE 1040) JEDEC, JESD22-A-101 Temp Cycling $UP $ NJOEXFMM VQUP cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC $ 3) VQUPIST&*" JEDEC, JESD22-A-101 High Temp Storage $IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low Temp Storage -65C, 1008 hrs. Thermal Shock $UP $ NJOEXFMM TFDUSBOTGFS 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) $ 3) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat $ TFDT.*-45% .FUIPE 0 0 td tr t - Time (s) Physical Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Moisture Sensitivity Level 3) $ IST SFnPXDZDMFT $1FBL +&%&$+45% -FWFM Soldering Parameters - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Pb-Free assembly (see Fig. 1) $ $ 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3C/sec. Max. TS(max) to TL - Ramp-up Rate 3C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) Peak Temp (TP) Figure 1 TP tP Critical Zone TL to TP Ramp-up Temperature Reflow Condition $ 60-150 secs. TL TS(max) tL Ramp-down Preheat TS(min) tS $ Time within 5C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6C/sec. Max. Time 25C to Peak Temp (TP) 8 min. Max. Do not exceed 25 time to peak temperature (t 25C to peak) Time $ Part Numbering Part Marking Bx xx 0 C x L RP TYPE B1: Negative Battrax SIDACtor B2: Positive Battrax SIDACtor HOLDING CURRENT 05: 5 mA 16: 160 mA 10: 100 mA 20: 200 mA REEL PACK RoHS COMPLIANT XXXX XXXXX IPP RATING PACKAGE TYPE CONSTRUCTION VARIABLE (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 116 Revised: February 22, 2011 Part Number Code (Refer to Electrical Characteristics Table) Date Code SIDACtor (R) Protection Thyristors SLIC Protection Dimensions -- Modified DO-214AA PIN 3 B D M N Dimensions P A C A B C D E F G H K M N P PIN 1 PIN 2 H E J 0.079 (2.0) 0.079 (2.0) F K G 0.079 (2.0) 0.040 (1.0) 0.110 (2.8) 0.030 (0.76) Dimensions are in inches (and millimeters). Inches Millimeters Min Max Min Max 0.130 0.201 0.077 0.159 0.030 0.075 0.002 0.077 0.006 0.022 0.027 0.052 0.156 0.220 0.087 0.181 0.063 0.096 0.008 0.104 0.016 0.028 0.033 0.058 3.30 5.10 1.95 4.05 0.75 1.90 0.05 1.95 0.15 0.56 0.69 1.32 3.95 5.60 2.20 4.60 1.60 2.45 0.20 2.65 0.41 0.71 0.84 1.47 Pad Outline (MM) Packing Options Package Type C Description Quantity Added Suffix Industry Standard Modified DO-214AA 3-leaded Tape and Reel Pack 2500 RP EIA-481-D Tape and Reel Specification -- Modified DO-214AA 0.157 (4.0) Pin 2 0.472 (12.0) 0.360 (9.2) 0.315 (8.0) Pin 1 Pin 3 12.99 (330.0) Dimensions are in inches (and millimeters). 0.512 (13.0) Arbor Hole Dia. Direction of Feed 0.49 (12.4) (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Dimensions are in inches (and millimeters). 117 Revised: February 22, 2011