Miscellaneous Connectors High Voltage Lead Assemblies 8116 Interconnection Systems AIM, LGH High Voltage Selection Guide 82750 Lead Assemblies, Connectors and Receptacles Revised 7-95 Rack and Panel Connectors Product Facis wm 15 KVDC rating up to 70,000 feet [21,336 m] (continuous) mw Extremely compact B All plastic design m@ Housings can be molded from a variety of materials m Provides highly retiable drawer-type connections m Low insertion and extraction forces m@ Hipot30 KVDC at sea level, two minutes m@ Pins and sockets (10-amp rating) are recessed for maximum safety; will accept conductor sizes to 16 AWG [1.25 mm?] w Hermetically sealed version available for soldering to metal bulkhead on single pin connector w Available with or without leads @ No tools required for field use Note: 6-Pin Plug Housing Dim. (Typ.)3.44 [87.38] L x 1.18 [29.97] W x 1.25 [31.75] H @ Can be readily adapted for No. of Pins Description Part Number in-line splice applications Receptacle-Standard 859111-1 1 Receptacle-Hermetic 862123-1 Plug-Standard 859113-1 Plug-Hermetic 862124-1 4 Receptacle 862909-1 Plug 862908-1 6 Receptacle 862536-i Plug 862672-1 Notes: 1. If bulkhead and mounting hardware are metallic and at ground potential, provisions must be made to protect the back end of the receptacle against arc-over and breakdown. 2. Connectors are available with or without feads. Leads can be furnished in virtually any length, with various insulation materials, in either standard white or a variety of optional colors, and with conductor sizes to 16 AWG [1.25 mm]. For the High Voltage Rack and Panel Connector to meet your specific requirements, consult AMP. SOURCE: Catalog 82024 Specifications 1-800-522-6752 1-800-722-1111 subject to change. Product Information Center/ AMP FAX Service Tooling/Technical Assistance Center