MC100ES6254 2.5/3.3V DIFFERENTIAL LVPECL 2x2 CLOCK SWITCH AND FANOUT BUFFER The Freescale MC100ES6254 is a bipolar monolithic differential 2x2 clock switch and fanout buffer. Designed for most demanding clock distribution systems, the MC100ES6254 supports various applications that require a large number of outputs to drive precisely aligned clock signals. The device is capable of driving and switching differential LVPECL signals. Using SiGe technology and a fully differential architecture, the device offers superior digital signal characteristics and very low clock skew error. Target applications for this clock driver are high performance clock/data switching, clock distribution or data loopback in computing, networking and telecommunication systems. 2.5/3.3 V DIFFERENTIAL LVPECL 2x2 CLOCK SWITCH AND FANOUT BUFFER Features * * * * * * * * * * * Fully differential architecture from input to all outputs SiGe technology supports near-zero output skew Supports DC to 3 GHz operation(1) of clock or data signals LVPECL compatible differential clock inputs and outputs LVCMOS compatible control inputs Single 3.3 V or 2.5 V supply 50 ps maximum device skew(1) Synchronous output enable eliminating output runt pulse generation and metastability Standard 32 lead LQFP package Industrial temperature range 32-lead Pb-free package available Functional Description MC100ES6254 is designed for very skew critical differential clock distribution systems and supports clock frequencies from DC up to 3.0 GHz. Typical applications for the MC100ES6254 are primary clock distribution, switching and loopback systems of highperformance computer, networking and telecommunication systems, as well as on-board clocking of OC-3, OC-12 and OC-48 speed communication systems. Primary purpose of the MC100ES6254 is high-speed clock switching applications. In addition, the MC100ES6254 can be configured as single 1:6 or dual 1:3 LVPECL fanout buffer for clock signals, or as loopback device in high-speed data applications. The MC100ES6254 can be operated from a 3.3 V or 2.5 V positive supply without the requirement of a negative supply line. FA SUFFIX 32-LEAD LQFP PACKAGE CASE 873A-04 AC SUFFIX 32-LEAD LQFP PACKAGE Pb-FREE PACKAGE CASE 873A-04 ORDERING INFORMATION Device Package MC100ES6254FA LQFP-32 MC100ES6254FAR2 LQFP-32 MC100ES6254AC LQFP-32 (Pb-Free) MC100ES6254ACR2 LQFP-32 (Pb-Free) 1. The device is functional up to 3 GHz and characterized up to 2.7 GHz. IDTTM / ICSTM 2.5V/3.3V LVPECL CLOCK SWITCH AND FANOUT BUFFER 1 MC100ES6254 REV. 6 OCTOBER 18, 2007 MC100ES6254 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Semiconductor, Inc. NETCOM MC100ES6254/D VCC Bank A CLK0 CLK0 0 QA1 QA1 QA2 QA2 1 VCC Bank B CLK1 CLK1 0 SEL0 SEL1 QB0 QB0 QB1 QB1 QB2 QB2 Sync VCC GND OEA CLK0 CLK0 SEL0 GND VCC Figure 1. MC100ES6254 Logic Diagram 24 23 22 21 20 19 18 17 QA2 25 16 QB2 QA2 26 15 QB2 VCC 27 14 VCC QA1 28 13 QB1 MC100ES6254 VCC QA0 31 10 QB0 QA0 32 9 QB0 1 2 3 4 5 6 7 8 VCC 11 GND 30 OEB VCC CLK1 QB1 CLK1 12 SEL1 29 GND QA1 VCC Freescale Semiconductor, Inc... 1 OEA OEB QA0 QA0 Figure 2. 32-Lead Package Pinout (Top View) IDTTM 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 2 2 For More Information On This Product, MC100ES6254 TIMING SOLUTIONS MC100ES6254 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Semiconductor, Inc. NETCOM MC100ES6254/D Table 1. PIN CONFIGURATION Freescale Semiconductor, Inc... Pin I/O Type Function CLK0, CLK0 Input LVPECL Differential reference clock signal input 0 CLK1, CLK1 Input LVPECL Differential reference clock signal input 1 OEA, OEB Input LVCMOS Output enable SEL0, SEL1 Input LVCMOS Clock switch select QA[0-2], QA[0-2] QB[0-2], QB[0-2] Output LVPECL Differential clock outputs (banks A and B) GND Supply GND Negative power supply VCC Supply VCC Positive power supply. All VCC pins must be connected to the positive power supply for correct DC and AC operation Table 2. FUNCTION TABLE Control Default 0 1 OEA 0 QA[0-2], Qx[0-2] are active. Deassertion of OE can be QA[0-2] = L, QA[0-2] = H (outputs disabled). Assertion asynchronous to the reference clock without generation of OE can be asynchronous to the reference clock of output runt pulses without generation of output runt pulses OEB 0 QA[0-2], Qx[0-2] are active. Deassertion of OE can be QA[0-2] = L, QA[0-2] = H (outputs disabled). Assertion asynchronous to the reference clock without generation of OE can be asynchronous to the reference clock of output runt pulses without generation of output runt pulses 00 Refer to Table 3 SEL0, SEL1 Table 3. CLOCK SELECT CONTROL SEL0 SEL1 CLK0 routed to CLK1 routed to Application Mode 0 0 QA[0:2] and QB[0:2] --- 1:6 fanout of CLK0 0 1 --- QA[0:2] and QB[0:2] 1:6 fanout of CLK1 1 0 QA[0:2] QB[0:2] Dual 1:3 buffer 1 1 QB[0:2] QA[0:2] Dual 1:3 buffer (crossed) Table 4. ABSOLUTE MAXIMUM RATINGSa Symbol Min Max Unit VCC Supply Voltage -0.3 3.6 V VIN DC Input Voltage -0.3 VCC+0.3 V DC Output Voltage -0.3 VOUT IIN IOUT TS a. Characteristics VCC+0.3 V DC Input Current 20 mA DC Output Current 50 mA 125 C Storage temperature -65 Condition Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation at absolute-maximum-rated conditions is not implied. IDTTM 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 3 TIMING SOLUTIONS For More Information On This Product, MC100ES6254 3 MC100ES6254 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Semiconductor, Inc. NETCOM MC100ES6254/D Table 5. GENERAL SPECIFICATIONS Symbol Characteristics Min Typ Unit VTT Output termination voltage MM ESD Protection (Machine model) HBM ESD Protection (Human body model) 2000 V CDM ESD Protection (Charged device model) 1500 V Latch-up immunity 200 LU VCC - 2 JA V mA 4.0 Thermal resistance junction to ambient JESD 51-3, single layer test board JESD 51-6, 2S2P multilayer test board JC Thermal resistance junction to case pF 86.0 75.4 70.9 65.3 59.6 C/W C/W C/W C/W C/W Natural convection 100 ft/min 200 ft/min 400 ft/min 800 ft/min 59.0 54.4 52.5 50.4 47.8 60.6 55.7 53.8 51.5 48.8 C/W C/W C/W C/W C/W Natural convection 100 ft/min 200 ft/min 400 ft/min 800 ft/min 23.0 26.3 C/W MIL-SPEC 883E 110 C TJ=+110 C Operating junction temperature (continuous operation) MTBF = 9.1 years Functional temperature range Inputs 83.1 73.3 68.9 63.8 57.4 b TFunc Condition V 200 CIN Freescale Semiconductor, Inc... Max a TA=-40 Method 1012.1 a. Output termination voltage VTT=0 V for VCC=2.5 V operation is supported but the power consumption of the device will increase. b. Operating junction temperature impacts device life time. Maximum continuous operating junction temperature should be selected according to the application life time requirements (See application note AN1545 and the application section in this data sheet for more information). The device AC and DC parameters are specified up to 110C junction temperature allowing the MC100ES6254 to be used in applications requiring industrial temperature range. It is recommended that users of the MC100ES6254 employ thermal modeling analysis to assist in applying the junction temperature specifications to their particular application. Table 6. DC CHARACTERISTICS (VCC = 3.3 V 5% or 2.5 V 5%, TJ = 0 to +110C) Symbol Characteristics Min Typ Max Unit Condition LVCMOS control inputs (OEA, OEB, SEL0, SEL1) VIL Input voltage low VIH Input voltage high IIN Input Currenta 0.8 2.0 V V 100 A VIN=VCC or VIN=GND LVPECL clock inputs (CLK0, CLK0, CLK1, CLK1) VPP VCMR AC differential input voltageb 0.1 1.3 V Differential operation Differential cross point voltagec 1.0 VCC-0.3 V Differential operation LVPECL clock outputs (QA0-2, QA0-2, QB0-2, QB0-2) a. VOH Output High Voltage VOL Output Low Voltage IGND Maximum Quiescent Supply Current without output termination current VCC=3.3 V 5% VCC=2.5 V 5% VCC-1.2 VCC-1.005 VCC-0.7 V IOH = -30 mAd VCC-1.9 VCC-1.9 VCC-1.705 VCC-1.705 VCC-1.5 VCC-1.3 V IOL = -5 mAe 52 85 mA GND pin Input have internal pullup/pulldown resistors that affect the input current. b. VPP is the minimum differential input voltage swing required to maintain AC characteristic. c. VCMR (DC) is the crosspoint of the differential input signal. Functional operation is obtained when the crosspoint is within the VCMR (DC) range and the input swing lies within the VPP (DC) specification. d. Equivalent to a termination 50 to VTT. e. ICC calculation: ICC = (number of differential output pairs used) * (IOH + IOL) + IGND IDTTM 2.5/3.3V Differential 2x2 Switch and Fanout Buffer I LVPECL = (number ofClock differential output pairs used) * (V -V )/R +(V CC OH TT load OL-VTT)/Rload) Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 4 4 For More Information On This Product, + IGND MC100ES6254 TIMING SOLUTIONS MC100ES6254 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Semiconductor, Inc. NETCOM MC100ES6254/D Table 7. AC CHARACTERISTICS (VCC = 3.3 V 5% or 2.5 V 5%, TJ = 0 to +110C)a Symbol VPP VCMR Freescale Semiconductor, Inc... VO(P-P) Characteristics Min Typ Max Unit Differential input voltageb (peak-to-peak) 0.3 1.3 V Differential input crosspoint voltagec 1.2 VCC-0.3 V Differential output voltage (peak-to-peak) fO < 1.1 GHz fO < 2.5 GHz fO < 3.0 GHz 0.45 0.35 0.20 fCLK Input Frequency tPD Propagation delay CLK, 1 to QA[] or QB[] V V V 0.7 0.55 0.35 0 360 485 Condition 3000d MHz 610 ps Differential tsk(O) Output-to-output skew 50 ps Differential tsk(PP) Output-to-output skew(part-to-part) 250 ps Differential tSK(P) Output pulse skewe 60 ps DCO Output duty cycle tREF < 100 MHz tREF < 800 MHz 50.6 54.8 % % DCfref = 50% DCfref = 50% Output cycle-to-cycle jitter RMS (1 ) 1 ps SEL0 SEL1 tJIT(CC) 49.4 45.2 tr , tf Output Rise/Fall Time 0.05 300 ps 20% to 80% tPDLf Output disable time 2.5T + tPD 3.5T + tPD ns T = CLK period tPLDg Output enable time 3T + tPD 4T + tPD ns T = CLK period a. AC characteristics apply for parallel output termination of 50 to VTT. b. VPP is the minimum differential input voltage swing required to maintain AC characteristics including tpd and device-to-device skew. c. VCMR (AC) is the crosspoint of the differential input signal. Normal AC operation is obtained when the crosspoint is within the VCMR (AC) range and the input swing lies within the VPP (AC) specification. Violation of VCMR (AC) or VPP (AC) impacts the device propagation delay, device and part-to-part skew. d. The MC100ES6254 is fully operational up to 3.0 GHz and is characterized up to 2.7 GHz. e. Output pulse skew is the absolute difference of the propagation delay times: | tPLH - tPHL |. f. Propagation delay OE deassertion to differential output disabled (differential low: true output low, complementary output high). g. Propagation delay OE assertion to output enabled (active). CLKX CLKX 50% OEX tPDL (OEX to Qx[]) tPLD (OEX to Qx[]) Qx[] Outputs disabled Qx[] Figure 3. MC100ES6254 output disable/enable timing Differential Pulse Generator Z = 50 ZO = 50 RT = 50 ZO = 50 DUT MC100ES62 RT = 50 VTT 4. MC100ES6254 AC test reference IDTTM 2.5/3.3V Differential LVPECL 2x2 Clock SwitchFigure and Fanout Buffer Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 5 TIMING SOLUTIONS For More Information On This Product, VTT MC100ES6254 5 MC100ES6254 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Semiconductor, Inc. NETCOM MC100ES6254/D APPLICATIONS INFORMATION Example Configurations 2x2 clock switch System A CLK0 CLK1 3 SEL0 SEL1 System B 3 MC100ES6254 Freescale Semiconductor, Inc... SEL0 SEL1 Switch configuration 0 0 CLK0 clocks system A and system B 0 1 CLK1 clocks system A and system B 1 0 1 1 CLK0 clocks system A and CLK1 clocks system B CLK1 clocks system B and CLK1 clocks system A 1:6 Clock Fanout Buffer CLK0 CLK1 0 0 SEL0 SEL1 MC100ES6254 Understanding the junction temperature range of the MC100ES6254 To make the optimum use of high clock frequency and low skew capabilities of the MC100ES6254, the MC100ES6254 is specified, characterized and tested for the junction temperature range of TJ=0C to +110C. Because the exact thermal performance depends on the PCB type, design, thermal management and natural or forced air convection, the junction temperature provides an exact way to correlate the application specific conditions to the published performance data of this data sheet. The correlation of the junction temperature range to the application ambient temperature range and vice versa can be done by calculation: TJ = TA + Rthja Ptot Assuming a thermal resistance (junction to ambient) of 54.4C/W (2s2p board, 200 ft/min airflow, refer to table 4) and a typical power consumption of 467 mW (all outputs terminated 50 to VTT, VCC=3.3 V, frequency independent), the junction temperature of the MC100ES6254 is approximately TA + 24.5C, and the minimum ambient temperature in this example case calculates to -24.5C (the maximum ambient temperature is 85.5C. Refer to Table 8). Exceeding the minimum junction temperature specification of the MC100ES6254 does not have a significant impact on the device functionality. However, the continuous use the MC100ES6254 at high ambient temperatures requires thermal management to not exceed the specified maximum junction temperature. Refer to the Application Note AN1545 for a power consumption calculation guideline. Table 8. Ambient temperature ranges (Ptot = 467 mW) Loopback device Rthja (2s2p board) System-Tx CLK0 QA[] Transmitter SEL0 SEL1 System-Rx QB[] CLK1 Receiver MC100ES6254 a. SEL0 SEL1 Switch configuration 0 0 System loopback 0 1 Line loopback 1 0 Transmit / Receive operation 1 1 System and line loopback TA, mina TA, max Natural convection 59.0C/W -28C 82C 100 ft/min 54.4C/W -25C 85C 200 ft/min 52.5C/W -24.5C 85.5C 400 ft/min 50.4C/W -23.5C 86.5C 800 ft/min 47.8C/W -22C 88C The MC100ES6254 device function is guaranteed from TA=-40C to TJ=110C Maintaining Lowest Device Skew The MC100ES6254 guarantees low output-to-output bank skew of 50 ps and a part-to-part skew of maximum 250 ps. To ensure low skew clock signals in the application, both outputs of any differential output pair need to be terminated identically, even if only one output is used. When fewer than all nine output pairs are used, identical termination of all output pairs within the output bank is recommended. If an entire output bank is not used, it is recommended to leave all of these outputs open and unterminated. This will reduce the device power consumption while maintaining minimum output skew. IDTTM 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 6 6 For More Information On This Product, MC100ES6254 TIMING SOLUTIONS MC100ES6254 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Semiconductor, Inc. NETCOM MC100ES6254/D VCC VCC 33...100 nF 0.1 nF MC100ES6254 Figure 5. VCC Power Supply Bypass Freescale Semiconductor, Inc... Power Supply Bypassing The MC100ES6254 is a mixed analog/digital product. The differential architecture of the MC100ES6254 supports low noise signal operation at high frequencies. In order to maintain its superior signal quality, all VCC pins should be bypassed by high-frequency ceramic capacitors connected to GND. If the spectral frequencies of the internally generated switching noise on the supply pins cross the series resonant point of an individual bypass capacitor, its overall impedance begins to look inductive and thus increases with increasing frequency. The parallel capacitor combination shown ensures that a low impedance path to ground exists for frequencies well above the noise bandwidth. IDTTM 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 7 TIMING SOLUTIONS For More Information On This Product, MC100ES6254 7 MC100ES6254 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Semiconductor, Inc. NETCOM MC100ES6254/D OUTLINE DIMENSIONS 4X 0.20 H 6 A-B D D1 PIN 1 INDEX 3 e/2 D1/2 32 A, B, D 25 1 E1/2 A F B 6 E1 E 4 F DETAIL G Freescale Semiconductor, Inc... 8 17 9 7 D/2 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DATUMS A, B, AND D TO BE DETERMINED AT DATUM PLANE H. 4. DIMENSIONS D AND E TO BE DETERMINED AT SEATING PLANE C. 5. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL NOT CAUSE THE LEAD WIDTH TO EXCEED THE MAXIMUM b DIMENSION BY MORE THAN 0.08-mm. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSION AND ADJACENT LEAD OR PROTRUSION: 0.07-mm. 6. DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.25-mm PER SIDE. D1 AND E1 ARE MAXIMUM PLASTIC BODY SIZE DIMENSIONS INCLUDING MOLD MISMATCH. 7. EXACT SHAPE OF EACH CORNER IS OPTIONAL. 8. THESE DIMENSIONS APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.1-mm AND 0.25-mm FROM THE LEAD TIP. 4 D A-B D H SEATING PLANE DETAIL G D 4X 0.20 C E/2 28X e 32X C 0.1 C DETAIL AD PLATING BASE METAL b1 c c1 b 8X (1) 0.20 R R2 A2 5 8 C A-B D SECTION F-F R R1 A M 0.25 GAUGE PLANE A1 (S) L (L1) DETAIL AD DIM A A1 A2 b b1 c c1 D D1 e E E1 L L1 q q1 R1 R2 S FA SUFFIX CASE 873A-03 ISSUE B LQFP PACKAGE CASE 873A-02 ISSUE B IDTTM 2.5/3.3V Differential LVPECL 2x2 Clock Switch and Fanout Buffer Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 8 8 For More Information On This Product, MILLIMETERS MIN MAX 1.40 1.60 0.05 0.15 1.35 1.45 0.30 0.45 0.30 0.40 0.09 0.20 0.09 0.16 9.00 BSC 7.00 BSC 0.80 BSC 9.00 BSC 7.00 BSC 0.50 0.70 1.00 REF 0 7 12 REF 0.08 0.20 0.08 --0.20 REF DATE 03/10/00 MC100ES6254 TIMING SOLUTIONS MC100ES6254 MPC92459 PART NUMBERS 900 2.5/3.3V MHzPRODUCT Differential Low Voltage LVPECL LVDS Clock 2x2 Clock Synthesizer Switch and Fanout Buffer INSERT NAME AND DOCUMENT TITLE NETCOM NETCOM Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales For Tech Support 800-345-7015 408-284-8200 Fax: 408-284-2775 netcom@idt.com 480-763-2056 Corporate Headquarters Asia Pacific and Japan Europe Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 (outside U.S.) Integrated Device Technology Singapore (1997) Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 (c) 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA XX-XXXX-XXXXX