NC3MXX-14-D 3 pole male cable connector for 8 mm - 10 mm cable O.D. with Nickel housing and silver contacts Special version of the XLR cable connector XX Series for large cable diameters. Incorporating all features of the XX Series. Bulk packed, to be ordered in multiples of 100. Features & Benefits * Unique cage design of female contact for low contact * Female connector with improved solid metal latch * Improved chuck type strain relief provides higher pull- * Colored rings and boots available for coding or * Rugged zinc diecast shell, longlasting and dependable resistance and high integrity which is larger and easier to handle out force and makes assembly easier and faster identification NC3MXX-14-D * Female contact incorporates a solder barrier to * Additional ground spring contacts for better shell * Boot with polyurethane gland gives high protection to * Sleek and ergonomic design - valuable and handy * Branded with unique hologram - guarantees genuine prevent solder running into the contact mating area ground continuity cable bending stresses and authentic Neutrik product 1/2 Technical Information Product Title NC3MXX-14-D Electrical Capacitance between contacts 4 pF Contact resistance 3 m Dielectric strength 1,5 kVdc Insulation resistance > 10 G (initial) Rated current per contact 16 A Rated voltage < 50 V Mechanical Cable O.D. 8 mm - 10 mm Insertion force 20 N Withdrawal force 20 N Lifetime > 1000 mating cycles Wiresize max. 2.5 mm Wiresize max. 14 AWG Environmental Standard compliance IEC 61076-2-103 Temperature range -30 C to +80 C NC3MXX-14-D 2/2