Rev.1.00, Aug.29.2003, page 1 of 5
HRC0103C
Silicon Schottky Barrier Diode for Rectifying
REJ03G0069-0100Z
(Previous: ADE-208-1598)
Rev.1.00
Aug.29.2003
Features
• Low forward voltage drop and suitable for high efficiency rectifying..
• Ultra small Flat Package (UFP) is suitable for surface mount design.
Ordering Information
Type No. Laser Mark Package Code
HRC0103C S9 UFP
Pin Arrangement
12
S9
Cathode mark
Mark
1. Cathode
2. Anode
HRC0103C
Rev.1.00, Aug.29.2003, page 2 of 5
Absolute Maximum Ratings
(Ta = 25°C)
Item Symbol Value Unit
Peak reverse voltage VRM *130 V
Reverse voltage VR30 V
Average rectified current IO *1100 mA
Peak forward surge current IFM 300 mA
Non-Repetitive peak forward surge current IFSM *21A
Junction temperature Tj 125 °C
Storage temperature Tstg –55 to +125 °C
Notes: 1. See from Fig.3 to Fig.5.
2. 10 ms sine wave 1 pulse.
Electrical Characteristics
(Ta = 25°C)
Item Symbol Min Typ Max Unit Test Condition
VF1 ——0.4 I
F = 10 mAForward voltage
VF2 ——0.6
V
IF = 100 mA
IR1 ——0.1 V
R = 5 VReverse current
IR2 ——0.2
µA
VR = 10 V
Capacitance C — — 8.0 pF VR = 0.5 V, f = 1 MHz
Thermal resistance Rth(j-a) — 550 — °C/W Polyimide board *1
Note: 1. Polyimide board
Unit: mm
3.0
0.8
1.5
20h×15w×0.8t
1.5
HRC0103C
Rev.1.00, Aug.29.2003, page 3 of 5
Main Characteristics
0 1020304050
0 0.2 0.4 0.6 0.8 1.0
0
0.005
0.020
0.015
0.010
03020 40
0.025
Pulse test
Forward voltage V
F
(V)
Fig.1 Forward current vs. Forward voltage
10
–3
10
–2
10
–5
10
–4
1.0
10
–6
10
–1
10
–3
10
–8
10
–5
10
–4
10
–7
10
–6
Reverse voltage V
R
(V)
Fig.2 Reverse current vs. Reverse voltage
Reverse current I
R
(A)
Forward current I
F
(A)
Ta = 75°C
Ta = 25°C
Pulse test
Ta = 75°C
Ta = 25°C
Ta = 50°C
t
T
0V
Tj = 125°CD=2/3
D=5/6
sin(θ=180°)
10
0.030
0.150.10
0
Reverse power dissipation Pd (W)
Fig4.
Reverse
power dissipation vs. Reverse voltage
Reverse voltage V
R
(V)
Fig3. Forward power dissipation vs.
Forward current
Forward current I
F
(A)
Forward power dissipation Pd (W)
DC
0.050
0.02
0.08
0.12
D=1/6
D=1/3
t
T
0A
Tj = 25°C
0.04
0.06
0.10
D=1/2
D = —
T
t
sin(θ=180°)D = —
T
t
D=1/2
HRC0103C
Rev.1.00, Aug.29.2003, page 4 of 5
0 50 10025 75 125
0
80
40
120
100
60
20
Average rectified current I
O
(
m
A)
Ambient temperature Ta (
°C
)
Fig.5 Average rectified current vs. Ambient temperature
D=1/2
V
R
=V
RRM
/2
Tj =125°C
Rth(j−a)=550°C/W
D=1/6
D=1/3
DC
−25
sin(θ=180°)
HRC0103C
Rev.1.00, Aug.29.2003, page 5 of 5
Package Dimensions
Package Code
JEDEC
JEITA
Mass
(reference value)
UFP
—
Conforms
0.0016 g
1.2 ± 0.10
1.6 ± 0.10
0.3 ± 0.05
0.8 ± 0.10
0.6 ± 0.10
0.13 ± 0.05
As of January, 2003
Unit: mm
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with
them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of
nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they
do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts,
programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these
materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers
contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed
herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page
(http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information
as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage,
liability or other loss resulting from the information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially
at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained
herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be
imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 0.0
