NB7L1008MNGEVB NB7L1008MNG Evaluation Board User's Manual Introduction The NB7L1008 is a high performance differential 1:8 Clock/Data fanout buffer that operates up to 12 Gbps/7 GHz with a 2.5 V or 3.3 V power supply. ON Semiconductor has developed a "universal" QFN-32 evaluation board and configured it for the NB7L1008. This evaluation board was designed to provide a flexible and convenient platform to quickly evaluate, characterize and verify the operation of the NB7L1008. This evaluation board manual contains: * Information on the NB7L1008 Evaluation Board * Test and Measurement Setup Procedures www.onsemi.com EVAL BOARD USER'S MANUAL Layer Stack L1 (Rogers) High-performance SMA connectors are provided for all high-speed input & output signal access. This manual should be used in conjunction with the device datasheet, which contains full technical details on the device specifications and operation. Evaluation Board Assembly Instructions The QFN-32 evaluation board is designed for characterizing devices in a 50-W laboratory environment using high bandwidth equipment. Board Layout The NB7L1008 Evaluation Board provides a high bandwidth, 50-W controlled impedance environment and is implemented in one layer. Output Loading/Termination LVPECL Outputs Table 1. DIFFERENTIAL INPUTS DRIVEN SINGLE - ENDED (Notes 1 & 2) Symbol Min Typ Max Unit VIH Single - Ended Input High Voltage Vth + 75 - VCC mV VIL Single - Ended Input Low Voltage VEE - Vth - 100 mV Vth Input Threshold Reference Voltage Range VEE + 1100 - VCC - 100 mV 200 - 1200 mV Min Typ Max Unit VISE Characteristic Single - Ended Input Voltage (VIH - VIL) 1. Vth, VIH, VIL and VISE parameters must be complied with simultaneously. 2. Vth is applied to the complementary input when operating in single-ended mode. Table 2. DIFFERENTIAL INPUTS DRIVEN DIFFERENTIALLY (IN, INB) (Note 3) Symbol Characteristic VIHD Differential Input High Voltage VEE + 1100 - VCC mV VILD Differential Input Low Voltage VEE - VIHD - 100 mV VID Differential Input Voltage (VIHD - VILD) 100 - 1200 mV IIH Input High Current -150 40 +150 mA IIL Input Low Current -150 5 +150 mA 3. VIHD, VILD, VID and VCMR parameters must be complied with simultaneously. If the input signals to the NB7L1008 require termination, internal 50-W resistors are provided via the VT pin and grounded using a SMA grounding plug then and should be stimulated with the appropriate voltage levels. (c) Semiconductor Components Industries, LLC, 2014 July, 2017 - Rev. 2 NOTE: For this evaluation board, VT is connected to ground, thus it can only be used for LVPECL inputs. 1 Publication Order Number: EVBUM2241/D NB7L1008MNGEVB Figure 1. Test Board 1. Connect the appropriate power supplies to VCC, DUTGND. 2. Connect a signal generator to the input SMA connectors. Setup input signal levels according to the device data sheet. 3. Connect a test measurement device to the device's output SMA connectors. NOTE: The test measurement device must contain 50-W termination. Table 3. NB7L1008, LVPECL INPUTS AND LVPECL OUTPUTS Device Pin Power Supply Connector Power Supply VCC VCC = 2 V 50 W Input VT = 0 V DUTGND DUTGND = VEE = -0.5 V (for 2.5 V) and -1.3 V (for 3.3 V) Table 4. NB7L1008, CML INPUTS AND LVPECL OUTPUTS Device Pin Power Supply Connector Power Supply VCC VCC = 2 V 50 W Input VT = VCC DUTGND DUTGND = VEE = -0.5 V (for 2.5 V) and -1.3 V (for 3.3 V) Table 5. NB7L1008, LVDS INPUTS AND LVPECL OUTPUTS Device Pin Power Supply Connector Power Supply VCC VCC = 2 V 50 W Input VT = Open DUTGND DUTGND = VEE = -0.5 V (for 2.5 V) and -1.3 V (for 3.3 V) www.onsemi.com 2 NB7L1008MNGEVB Figure 2. Schematic Drawing Table 6. BILL OF MATERIALS Manufacturer Part Number Components Manufacturer Description SMA Connector Rosenberger High Performance SMA Connector, Side Launch, Gold Plated 32K243-40ME3 http://www.rosenberger.de http://www.rosenbergerna.com SMA Connector Johnson-Emerson SMA Connector, Side Launch, Gold Plated 142-0701-801 http://www.digikey.com Surface Mount Test Points Keystone* SMT Compact Test Point 5016 http://www.keylco.com Chip Capacitor AVC Corporation* 0603 0.1 mF 10% 0603C104KAT2A http://www.avxcorp.com Chip Capacitor Kemet 1206 0.01 mF 10% C1206C103K5RACTU http://www.newark.com Chip Capacitor TDK 0603 0.1 mF 10% C3216X5R1H106K160AB http://www.newark.com Evaluation Board ON Semiconductor QFN 32 Evaluation Board - 2-Layer http://www.onsemi.com Device Samples ON Semiconductor NB7L1008MNG http://www.onsemi.com *Components are available through most distributors, i.e. www.newark.com, www.Digikey.com www.onsemi.com 3 Web Site NB7L1008MNGEVB ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative EVBUM2241/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: NB7L1008MNGEVB