5220 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole Typ 5220, Fuseholder 2-pole Screw-On Version Typ 5220, Fuseholder 2-pole Snap-In Version C14 Approvals and Compliances 70 C Description - Panel Mount : Snap-in or screw-on mounting from front side - 3 Functions : Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm 2-pole , Line filter in standard and medical version - Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - Ultra-compact design Recessed faston connectors High quality filter case made of stainless steel Highly resistant since potted filter Characteristics - All single elements are already wired - Plug removal necessary for fuse-link replacement - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 References Alternative: version without line filter 6220 Alternative: Standard version Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material: Housing 1 - 10 A @ Ta 40 C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 C / 125 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 A (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 C to 85 C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 3 mm Thermoplastic, black, UL 94V-0 appliance inlet/-outlet Fuseholder Rated Power Acceptance @ Ta 23 C Power Acceptance @ Ta > 23C Line Filter MTBF C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I 2-pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 1.6 W (2-pole) Admissible power acceptance at higher ambient temperature see derating curves Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 2'300'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5220 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 101307 UL Approvals UL UL File Number: E72928 EMC Products 1 5220 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] Screw-on mounting type 5220 2.5 43.6 0.2 34 2 EMC Products 5 9 32 +0.50 0 36 +0.50 0 max.R3 29 o 6.3x90 44 36 o 3.5 M3 5220 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Snap-in mounting type 5220 32 5 9 43.8 0.2 34 29 36 max.R3 +0.20 0 3.5 +0.20 0 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [M] 1 Standard Version 2 x 11 47 2.2 - 2 Standard Version 2x4 47 2.2 - 4 Standard Version 2 x 1.6 47 2.2 - 6 Standard Version 2 x 0.7 47 2.2 - 8 Standard Version 2 x 0.6 47 2.2 - 10 Standard Version 2 x 0.4 47 2.2 - 1 Medical Version (M5) 2 x 11 47 - 1 2 Medical Version (M5) 2x4 47 - 1 4 Medical Version (M5) 2 x 1.6 47 - 1 6 Medical Version (M5) 2 x 0.7 47 - 1 8 Medical Version (M5) 2 x 0.6 47 - 1 10 Medical Version (M5) 2 x 0.4 47 - 1 10 Standard and Medical Version 2 x 11 47 2.2 1 Diagrams 5220 Standard version L 1) 1) Line 2) Load L' F1 L1 Cy PE N 5220 Medical version F2 Cx L2 Cy L 2) PE' N' 1) F1 PE N L' F2 L1 Cx 2) PE' R L2 N' 1) Line 2) Load EMC Products 3 5220 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Derating Curves 2-pole Admissible power acceptance in Watt 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta C Attenuation Loss - - - - 50 differential mode _____ 50 common mode Standard version 1A 2A 8A 10 A 4A 6A 4A 6A Medical version (M5) 1A 2A 8A 10 A All Variants Rated Current [A] Filter-Type Panel mounting 1 Standard Version Snap-in 2-pole 5220.0143.1 2 Standard Version Snap-in 2-pole 5220.0243.1 4 Standard Version Snap-in 2-pole 5220.0443.1 6 Standard Version Snap-in 2-pole 5220.0643.1 4 EMC Products Fuseholder Order Number 5220 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current [A] Filter-Type Panel mounting Fuseholder Order Number 8 Standard Version Snap-in 2-pole 5220.0843.1 10 Standard Version Snap-in 2-pole 5220.1043.1 1 Standard Version Screw 2-pole 5220.0123.1 2 Standard Version Screw 2-pole 5220.0223.1 4 Standard Version Screw 2-pole 5220.0423.1 6 Standard Version Screw 2-pole 5220.0623.1 8 Standard Version Screw 2-pole 5220.0823.1 10 Standard Version Screw 2-pole 5220.1023.1 1 Medical Version (M5) Snap-in 2-pole 5220.0143.3 2 Medical Version (M5) Snap-in 2-pole 5220.0243.3 4 Medical Version (M5) Snap-in 2-pole 5220.0443.3 6 Medical Version (M5) Snap-in 2-pole 5220.0643.3 8 Medical Version (M5) Snap-in 2-pole 5220.0843.3 10 Medical Version (M5) Snap-in 2-pole 5220.1043.3 1 Medical Version (M5) Screw 2-pole 5220.0123.3 2 Medical Version (M5) Screw 2-pole 5220.0223.3 4 Medical Version (M5) Screw 2-pole 5220.0423.3 6 Medical Version (M5) Screw 2-pole 5220.0623.3 8 Medical Version (M5) Screw 2-pole 5220.0823.3 10 Medical Version (M5) Screw 2-pole 5220.1023.3 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-CheckSCHURTER Packaging unit 10 Pcs Accessories Description Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Countersunk, B 4700.0002 EMC Products 5 5220 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 5220 Connector Overview complete 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 4012 Connector further types to 5220 ... 02.12.2017 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 6 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 5220.0623.1 5220.0443.3 5220.0643.3 5220.0143.1 5220.0423.3 5220.0123.1 5220.0123.3 5220.0223.1 5220.0223.3 5220.0223.7 5220.0243.1 5220.0423.1 5220.0423.6 5220.0443.3.01 5220.0623.3 5220.0823.1 5220.1023.3 5220.1043.1 5220.0443.1 5220.0643.1 5220.0243.3 5220.1023.1 5220.0143.3 5220.1043.3