-OMNI-BEAM Logic Modules OMNI-BEAM sensors easily accept the addition of timing logic, when needed. Two multiple-function logic modules are available (see photo, upper right). Model OLMS5 is programmable for ON-delay, OFF-delay, or ON/OFF-delay timing logic. Models OLM8 and OLM8M1 offer either ONE-SHOT or DELAYED ONE-SHOT functions. Programming of the logic function, the timing range, and the output state is done via a set of four switches located on the logic module. Both logic modules feature 15-turn clutched potentiometers for accurate timing adjustments. The logic module simply slides into the sensor head housing and inter- connects without wires (see photo, lower right). Timing adjustments are easily accessible at the top of the sensor head, and are protected by the sensor head's transparent, gasketed LEXAN cover. OMNI-BEAM Logic Module Specifications: Operating Temperature: 0 to +50C (+32 to +122F) when used in OMNI-BEAM E-series sensors. Timing Adjustments: Two 15-turn clutched potentiometers with brass elements, accessible from outside at top of sensor block, beneath gasketed cover. Timing Repeatability: Plus or minus 2% of timing range (maximum). Assumes conditions of constant temperature and power supply. Useful Time Range: Useful range is from maximum time down to 10% of maximum for all models. When timing potentiometer is set fully counterclockwise, time will be approximately 1% of maximum for models OLMS5 and OLM8, and 2% of maximum for model OLM8M1. = AWN EE the photoelectric specialist Plug-in timing logic modules are available for either delay or pulse timing functions. The logic module slides into the sensor head a and interconnects without wires. OLMS Delay Timer Logic Module Timing Logic Function Switch Positions Model OLMS is programmable for ON-DELAY or OFF- and Timing Range(s) 62 BA DELAY or ON/OFF DELAY timing functions. Each ON-DELAY 1 second maximum ON OFF OFF OFF eley emote ee eee eee eS | ON DRLAY 15 seconds maximum OFF ON OFF OFF - od PIERCE POM SUREE 8S ORE OF Shor ae usiet | OFEDELAY 1 second maximum OFF__OFF ON OFF OFF DELAY 15 seconds maximum OFF OFF OFF ON am ON-DELAY & 1 second maximum SOA OFF-DELAY 1 second maximum ON OFF ON OFF ON-DELAY & 1 second maximum OFF-delay ey ey OFF-DELAY 15 seconds maximum ON OFF OFF ON SCV. a = ON-DELAY & = 15 seconds maximum OFF-DELAY 1 second maximum OFF ON ON OFF ON/OFF. we} we is see 40.9 | Hl) 000 | ON-DELAY & 15 seconds maximum me a, ie , a OFF-DELAY 15 seconds maximum OFF ON OFF ON NOTE 1: if both ranges of either delay function are selected (i.e., if both 1 secund and 15 second switches are "on"), the delay time range becomes 16 seconds, maximum. NOTE 2: with switches #1 and #2 "off" (ao ON-DELAY programmed), ON-DELAY is adjustable from "negligible" up to 100 milliseconds, maximum. NOTE 3: with switches #3 and #4 "off" (no OFF-DELAY programmed), OFF-DELAY is adjustable from negligible up to 100 milliseconds, maximum. OLM8(M1) Pulse Timer Logic Modules Logic Function and Timing Ranges: Switch Positions Models OLM8 and OLM8M1 are programmable for ei- models OLM8 & OLM8MI* #1 #2 #3 #4 ther a ONE-SHOT ("single-shot") pulse timer or a DE- LAYED ONE-SHOT logic timer. DELAY and PULSE ONE-SHOT 1 (.1) second max. pulse OFF OFF OFF ----- times may be independently adjusted and separately pro- | QNE-SHOT 15 (J.5) seconds max. pulse OFF OFF ON ----- grammed for either a long or short adjustment range. OLM8M1 maximum times are 1/10 those of modelOLM8. DELAYED 1 (.1) second max. delay ONE-SHOT _ 1(./) second max. pulse ON OFF OFF ----- One-shot gue, gules DELAYED 15 (1.5) seconds max. delay OUT i J ____ ONE-SHOT 1 (.1) second max. pulse OFF ON OFF ----- SIGNAL _ DELAYED 1 (.1) second max. delay Delayed slay Pulso Daley Pulso ONE-SHOT 15 (1.5) seconds max. pulse ON OFF ON) ---- one erat |, Se Oey DELAYED 15 (1.5) seconds max. delay SOV is ONE-SHOT 15 (1.5) seconds max. pulse OFF ON ON ~~ ----- For normally open outputs (outputs conduct during pulse time) OFF NOTH te ELAS g - ile. Pills gare a For normally closed outputs (outputs open during pulse time) ON : 1s non-retriggerabdle. se 1s rel ggera ec ie oe : . oe : DELAY time is less than the ONE-SHOT pulse time. * Timing specifications for model OLM8M1 are printed in italics NOTE 2: if both ranges of the delay function are selected (i.e., if both 1 second and 15 second switches are "on"), the delay time range becomes 16 (1.6) seconds, maximum. NOTE 3: with switches #1 and #2 "off" (no DELAY programmed), DELAY is adjustable from "negligible" up to 10 (4.5) milliseconds, maximum. Printed in USA Banner Engineering Corp. 9714 10th Ave. No. Minneapolis, MN 55441 Tel. (763) 544-3164 FAX (763) 544-3573 P/N 03533