https://www.phoenixcontact.com/us/products/1407730 Contact insert - HC-B 10-I-PT-M - 1407730 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON pin insert, B10 series, 10 + PE-pos., push-in connection Product Features For fast coding with plastic profile Conductor connection without tools Significant time savings during conductor connection Test connection for 2 mm test plug Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 60.0 g Custom tariff number 85366990 Country of origin China Technical data General Connection method Push-in connection Degree of pollution 3 Overvoltage category III Number of positions 10+PE Insertion/withdrawal cycles 500 Size B10 Connection in acc. with standard IEC / EN Conductor cross section 0.14 mm ... 2.5 mm Connection cross section AWG 26 ... 14 Stripping length 8 mm ... 10 mm 03/11/2016 Page 1 / 4 https://www.phoenixcontact.com/us/products/1407730 Contact insert - HC-B 10-I-PT-M - 1407730 Technical data General Assembly instructions Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HCB10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles. Connection Connectors may only be operated when there is no load/the power is switched off. Can be used for solid wires and stranded wires with ferrule. Ambient conditions Ambient temperature (operation) -40 C ... 125 C (including heating up of contacts) Material data Flammability rating according to UL 94 V0 Contact material Copper alloy Contact surface material Ag/Sn (tarnish protection) Contact carrier material PA Standards/regulations PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2) PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Electrical characteristics Rated voltage (III/3) 500 V Rated surge voltage 6 kV Rated current 16 A Standards and Regulations Connection in acc. with standard IEC / EN Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 3.0 EC000438 03/11/2016 Page 2 / 4 https://www.phoenixcontact.com/us/products/1407730 Contact insert - HC-B 10-I-PT-M - 1407730 Classifications ETIM ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / EAC / EAC / GL Ex Approvals Approvals submitted Approval details CSA mm/AWG/kcmil 14 Nominal current IN 10 A Nominal voltage UN 600 V UL Recognized mm/AWG/kcmil 14 03/11/2016 Page 3 / 4 https://www.phoenixcontact.com/us/products/1407730 Contact insert - HC-B 10-I-PT-M - 1407730 Approvals Nominal current IN 13 A Nominal voltage UN 600 V EAC EAC GL Drawings 6 1 7 2 8 3 9 4 10 5 Diagram Current strength [A] Schematic diagram 32 28 24 20 16 12 8 4 0 0 2 = 2,5 mm HC-B 06 PT 2 = 2,5 mm HC-B 10 PT 2 = 2,5 mm HC-B 16 PT 2 = 2,5 mm HC-B 24 PT 10 20 30 40 50 60 70 80 90 100 110 Ambient temperature [C] Connector pin assignment, connection side Derating diagram for 2.5 mm Dimensional drawing Dimensional drawing 49 20 27 O3,4 35 57 59 27 34 34,4 63,4 57 Dimensional drawing Mounting cutout when used without housing Phoenix Contact 2016 (c) - all rights reserved http://www.phoenixcontact.com 03/11/2016 Page 4 / 4