Luminous Intensity
Iv (mcd) @ 10 mA
Color Part Number Min. Max.
HLMP-3315 13.8 -
Red HLMP-3317 22.00 -
HLMP-3316-I00xx 22.0 -
HLMP-3316-IJ0xx 22.0 70.4
HLMP-3415 9.2 -
Yellow HLMP-3416 14.7 -
HLMP-3416-G00xx 14.7 -
HLMP-3416-IJ0xx 37.6 120.2
HLMP-3517 6.7 -
Green HLMP-3519 10.6 -
HLMP-3519-F00xx 10.6 -
HLMP-3519-IJ0xx 43.6 139.6
T-13/4 (5 mm) High Intensity
LED Lamps
Technical Data
Features
• High Intensity
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
• Popular T-13/4 Diameter
Package
• Selected Minimum
Intensities
• Narrow Viewing Angle
• General Purpose Leads
• Reliable and Rugged
• Available on Tape and Reel
Description
This family of T-13/4 nondiffused
LED lamps is specially designed
for applications requiring higher
on-axis intensity than is
achievable with a standard lamp.
The light generated is focused to
a narrow beam to achieve this
effect.
HLMP-331x Series
HLMP-341x Series
HLMP-351x Series
Selection Guide
2
Package Dimensions
Part Numbering System
HLMP - 3 x 1 x - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B1: Right Angle Housing, Uneven Leads
B2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Brightness Level
5, 7: Less Brightness
6, 9: Higher Brightness
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
3
Electrical Characteristics at TA = 25°C
Device
Symbol Description HLMP- Min. Typ. Max. Units Test Conditions
IVLuminous Intensity 3315 13.8 40.0 mcd IF = 10 mA (Figure 3)
3316 22 60.0
3415 9.2 40.0 mcd IF = 10 mA (Figure 8)
3416 14.7 50.0
3517 6.7 50.0 mcd IF = 10 mA (Figure 13)
3519 10.6 70.0
2θ1/2Including Angle 3315 35 Deg. IF = 10 mA
Between Half 3316 35 See Note 1 (Figure 6)
Luminous Intensity
Points 3415 35 Deg. IF = 10 mA
3416 35 See Note 1 (Figure 11)
3517 24 Deg. IF = 10 mA
3519 24 See Note 1 (Figure 16)
λPEAK Peak Wavelength 331X 635 nm Measurement at Peak
341X 583 (Figure 1)
351X 565
∆λ1/2 Spectral Line Halfwidth 331X 40 nm
341X 36
351X 28
λdDominant Wavelength 331X 626 nm See Note 2 (Figure 1)
341X 585
351X 569
τsSpeed of Response 331X 90 ns
341X 90
351X 500
C Capacitance 331X 11 pF VF = 0; f = 1 MHz
341X 15
351X 18
RθJ-PIN Thermal Resistance 331X 260 °C/W Junction to Cathode
341X Lead
351X
VFForward Voltage 331X 1.9 2.4 V IF = 10 mA (Figure 2)
341X 2.0 2.4 IF = 10 mA (Figure 7)
351X 2.1 2.7 IF = 10 mA (Figure 12)
VRReverse Breakdown Volt. All 5.0 V IR = 100 µA
ηVLuminous Efficacy 331X 145 lumens See Note 3
341X 500 Watt
351X 595
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and
ηv is the luminous efficacy in lumens/watt.
4
Absolute Maximum Ratings at TA = 25°C
Parameter 331X Series 341X Series 351X Series Units
Peak Forward Current 90 60 90 mA
Average Forward Current[1] 25 20 25 mA
DC Current[2] 30 20 30 mA
Power Dissipation[3] 135 85 135 mW
Reverse Voltage (IR = 100 µA) 5 5 5 V
Transient Forward Current[4] 500 500 500 mA
(10 µsec Pulse)
LED Junction Temperature 110 110 110 °C
Operating Temperature Range -55 to +100 -55 to +100 -20 to +100 °C
Storage Temperature Range -55 to +100
Lead Soldering Temperature 260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at
1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
Figure 1. Relative Intensity vs. Wavelength.
5
High Efficiency Red HLMP-331X Series
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 2. Forward Current vs.
Forward Voltage Characteristics. Figure 4. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration (IDC MAX
as per MAX Ratings).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
6
Yellow HLMP-341X Series
Figure 8. Relative Luminous Intensity
vs. DC Forward Current.
Figure 7. Forward Current vs.
Forward Voltage Characteristics. Figure 9. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak Current.
Figure 10. Maximum Tolerable Peak
Current vs. Pulse Duration (IDC MAX
as per MAX Ratings).
Figure 11. Relative Luminous Intensity vs. Angular Displacement.
7
Green HLMP-351X Series
Figure 13. Relative Luminous
Intensity vs. DC Forward Current.
Figure 12. Forward Current vs.
Forward Voltage Characteristics. Figure 14. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 15. Maximum Tolerable Peak
Current vs. Pulse Duration (IDC MAX
as per MAX Ratings).
Figure 16. Relative Luminous Intensity vs. Angular Displacement. T-13/4
Lamp.
8
Intensity Range
(mcd)
Color Bin Min. Max.
H 15.5 24.8
I 24.8 39.6
J 39.6 63.4
K 63.4 101.5
L 101.5 162.4
M 162.4 234.6
N 234.6 340.0
O 340.0 540.0
Red P 540.0 850.0
Q 850.0 1200.0
R 1200.0 1700.0
S 1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
Table 2. Intensity Bin Limit Table 2. (Cont'd) Table 2. (Cont'd)
Maximum tolerance for each bin limit is ± 18%.
Intensity Range
(mcd)
Color Bin Min. Max.
G 16.6 26.5
H 26.5 42.3
I 42.3 67.7
J 67.7 108.2
K 108.2 173.2
L 173.2 250.0
M 250.0 360.0
Yellow N 360.0 510.0
O 510.0 800.0
P 800.0 1250.0
Q 1250.0 1800.0
R 1800.0 2900.0
S 2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
Intensity Range
(mcd)
Color Bin Min. Max.
E 7.6 12.0
F 12.0 19.1
G 19.1 30.7
H 30.7 49.1
I 49.1 78.5
J 78.5 125.7
K 125.7 201.1
L 201.1 289.0
Green M 289.0 417.0
N 417.0 680.0
O 680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S 4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
9
Color Categories
Lambda (nm)
Color Cat # Min. Max.
6 561.5 564.5
5 564.5 567.5
Green 4 567.5 570.5
3 570.5 573.5
2 573.5 576.5
1 582.0 584.5
3 584.5 587.0
Yellow 2 587.0 589.5
4 589.5 592.0
5 592.0 593.0
Tolerance for each bin limit is ± 0.5 nm.
Mechanical Option Matrix
Mechanical Option Code Definition
00 Bulk Packaging, minimum increment 500 pcs/bag
01 Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag
B1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
B2 Right Angle Housing, even leads, minimum increment 500 pcs/bag
Note:
All Categories are established for classification of products. Products may not be available in all categories. Please contact your local
Agilent representative for further clarification/information.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
July 16, 2001
Obsoletes 5964-9293E (4/96)
5988-2146EN
