Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-63 –
010
0d±0.05
Sleeve
14 min.
3 min.
L=
(=08L15, 016L15, 018L15 : L±1.5)
Pressure relief
06.3
But exclude 7 mm
height
=L16 : L±1.0
L20 : L±2.0
+
–
04 to 08
0D±0.5
F±0.5
0D±0.5
■ Features
● Endurance : 105 °C 1000 h to 5000 h
● Low impedance
● RoHS directive compliant
Radial Lead Type
Series: FC Type: A
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 10 0 V.DC
Nominal Cap. Range 2.2 μF to 15000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan d
W.V. (V) 6.3 10 16 25 35 50 63 100 (120 Hz/+20 °C)
tan d0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
For capacitance value > 1000 μF, add 0.02 per every 1000 μF.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC
and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to
20 °C, the capacitors shall meet the limits specifi ed bellow.
Duration : 04 to 06.3: 1000 hours, 08: 2000 hours , 010: 3000 hours , 012.5 to 018: 5000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
2.2 to 330 0.55 0.65 0.85 0.90 1.00
390 to 1000 0.70 0.75 0.90 0.95 1.00
1200 to 2200 0.75 0.80 0.90 0.95 1.00
2700 to 15000 0.80 0.85 0.95 1.00 1.00
■ Frequency correction factor for ripple current
L>11 L=7
Body Dia. 0D 4 5 6.3 8 10 12.5 16 18 4 5 6.3
Body Length L
15 to 25 30 to 40
Lead Dia. 0d 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 1.5 2.0 2.5
■ Di men sions in mm (not to scale) (Unit : mm)
02 Dec. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-64 –
■ Case size/ Impedance/ Ripple Current
W.V(V.DC) 6.3 V to 35 V 50 V 63 V 100 V
Case size
(0D×L)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
20 °C –10 °C 20 °C –10 °C 20 °C –10 °C 20 °C –10 °C
4 × 7 2.00 5.00 65
5 × 70.9502.40 120
6.3 × 70.4501.20 200
4 × 11 1.302.60 1202.505.00 903.507.00 80
5 × 11 0 .8 0 0 1.6 0 17 5 ✽✽ ✽
2.00 4.00 145 4.10 8.20 80
5 × 15 0.500 1.00 235 0.900 1.80 215 1.30 2.60 200 2.80 5.60 90
6.3 × 11.2 0.350 0.700 290 0.600 1.20 260 1.00 2.00 240 1.80 3.60 114
6.3 × 15 0.250 0.500 400 0.400 0.800 360 0.700 1.40 330 1.10 2.20 155
8 × 11.5 0.117 0.234 555 0.234 0.468 485 0.342 0.684 405 0.680 1.36 260
8 × 15 0.085 0.170 730 0.155 0.310 635 0.230 0.460 535 0.450 0.900 340
8 × 20 0.065 0.130 995 0.120 0.240 860 0.178 0.356 690 0.330 0.660 455
10 × 12.5 0.090 0.180 755 0.162 0.324 615 0.256 0.512 535 0.530 1.06 306
10 × 16 0.068 0.136 1050 0.119 0.238 850 0.194 0.388 600 0.360 0.720 400
10 × 20 0.052 0.104 1220 0.090 0.180 1030 0.147 0.294 885 0.240 0.480 463
10 × 25 0.045 0.090 1440 0.082 0.164 1200 0.130 0.260 1050 0.210 0.420 599
10 × 30 0.035 0.070 1815 0.060 0.120 1610 0.090 0.180 1300 0.150 0.300 698
12.5 × 15 0.065 0.130 1205 0.110 0.220 1150 0.150 0.300 1020 0.230 0.460 511
12.5 × 20 0.038 0.076 1655 0.063 0.126 1480 0.085 0.170 1285 0.180 0.360 671
12.5 × 25 0.030 0.060 1945 0.050 0.100 1832 0.070 0.140 1720 0.110 0.220 807
12.5 × 30 0.025 0.050 2310 0.040 0.080 2215 0.055 0.110 2090 0.098 0.196 937
12.5 × 35 0.022 0.044 2510 0.034 0.068 2285 0.047 0.094 2265 0.087 0.174 1040
12.5 × 40 0.018 0.036 2655 0.030 0.060 2590 0.042 0.084 2560 0.072 0.144 1130
16 × 15 0.043 0.086 1690 0.080 0.160 1610 0.090 0.180 1410 0.140 0.280 793
16 × 20 0.029 0.058 2205 0.048 0.096 1835 0.059 0.118 1765 0.110 0.220 995
16 × 25 0.022 0.044 2555 0.034 0.068 2235 0.050 0.100 2160 0.089 0.178 1170
16 × 31.5 0.018 0.036 3010 0.028 0.056 2700 0.043 0.086 2670 0.062 0.124 1520
16 × 35.5 0.016 0.032 3150 0.025 0.050 2790 0.036 0.072 2770 0.053 0.106 1730
16 × 40 0.015 0.030 3360 0.023 0.046 2845 0.030 0.060 2825 0.047 0.094 1920
18 × 15 0.038 0.076 2000 0.068 0.136 1900 0.086 0.172 1690 0.120 0.240 917
18 × 20 0.028 0.056 2490 0.042 0.084 2420 0.055 0.110 2290 0.080 0.160 1230
18 × 25 0.020 0.040 2740 0.029 0.058 2610 0.043 0.086 2585 0.070 0.140 1420
18 × 31.5 0.016 0.032 3635 0.025 0.050 3000 0.032 0.064 2950 0.062 0.124 1600
18 × 35.5 0.015 0.030 3680 0.023 0.046 3100 0.030 0.060 3095 0.041 0.082 1770
18 × 40 0.014 0.028 3735 – – – 0.025 0.050 3205 0.036 0.072 2300
✽
Case size
(0D×L)
Capacitance
(μF)
Imped ance (Ω)/(100 kHz) Ripple Current
(mA r.m.s)(100 kHz)
20 °C –10 °C
5 × 11
1.0 2.40 4.80 20
2.2 1.80 3.60 45
3.3 1.30 2.60 65
4.7 1.30 2.60 95
10 1.30 2.60 125
12 1.30 2.60 135
15 1.30 2.60 145
18 1.30 2.60 155
22 1.30 2.60 155
01 Oct. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-65 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
6.3
27 4 7 65 2.000 1000 0.45 1.5 5.0 2.5 EEAFC0J270( ) 200 2000
56 5 7 120 0.950 1000 0.45 2.05.02.5
EEAFC0J560( ) 200 2000
68 4 11 120 1.300 1000 0.45 1.55.02.5
EEUFC0J680( ) 200 2000
100 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC0J101( ) 200 2000
120 6.3 7 200 0.450 1000 0.45 2.55.02.5
EEAFC0J121( ) 200 2000
150 5 15 235 0.500 1000 0.50 2.05.02.5
EEUFC0J151( ) 200 2000
220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J221( ) 200 2000
270 6.3 11.2 290 0.350 1000 0.50 2.55.02.5
EEUFC0J271( ) 200 2000
330 6.3 11.2 290 0.350 1000 0.50 2.55.02.5
EEUFC0J331S( ) 200 2000
6.3 15 400 0.250 1000 0.50 2.55.02.5
EEUFC0J331( ) 200 2000
390 8 11.5 555 0.1172000 0.60 3.5 5.0 EEUFC0J391( ) 200 1000
470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J471( ) 200 1000
560 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J561( ) 200 1000
820 8 15 7300.085 2000 0.60 3.5 5.0 EEUFC0J821L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J821( ) 200 500
1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J102( ) 200 500
1200 8 20 9950.065 2000 0.60 3.5 5.0 EEUFC0J122L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC0J122( ) 200 500
1500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC0J152( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC0J152S( ) 200 500
1800 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J182( ) 200 500
2200 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J222( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J222S( ) 100 250
2700
10 30 1815 0.035 3000 0.60 5.0 EEUFC0J272L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J272( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J272S( ) 100 250
3300 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J332( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC0J332S( ) 100 250
3900 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC0J392( ) 200 500
4700 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC0J472 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC0J472S( ) 100 250
5600 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC0J562L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC0J562( ) 100 250
6800
12.5 40 2655 0.018 5000 0.80 5.0 EEUFC0J682L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC0J682( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC0J682S( ) 100 250
8200 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC0J822 100
10000 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC0J103 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC0J103S( ) 100 250
12000 16 40 3360 0.015 5000 0.80 7.5 EEUFC0J123L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC0J123 50
15000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC0J153 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-66 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
10
22 4 7652.000 1000 0.45 1.5 5.0 2.5 EEAFC1A220( ) 200 2000
39 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1A390( ) 200 2000
47 4 11 120 1.300 1000 0.45 1.55.02.5
EEUFC1A470( ) 200 2000
82 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1A820( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1A820( ) 200 2000
100 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1A101S( ) 200 2000
5 15 235 0.500 1000 0.50 2.05.02.5
EEUFC1A101( ) 200 2000
150 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A151( ) 200 2000
180 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A181( ) 200 2000
220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A221S( ) 200 2000
6.3 15 400 0.250 1000 0.50 2.55.02.5
EEUFC1A221( ) 200 2000
330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A331( ) 200 1000
390 8 11.5 555 0.117 2 000 0.60 3.5 5.0 EEUFC1A391( ) 200 1000
470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A471( ) 200 1000
560 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A561( ) 200 500
680 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1A681L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A681( ) 200 500
820 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A821( ) 200 500
1000 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1A102L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A102( ) 200 500
1200 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1A122( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1A122S( ) 200 500
1500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1A152( ) 200 500
1800 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A182( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1A182S( ) 100 250
2200 10 30 1815 0.035 3000 0.60 5.0 EEUFC1A222L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A222( ) 200 500
2700 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1A272( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1A272S( ) 100 250
3300 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1A332 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1A332S( ) 100 250
3900 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1A392L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1A392( ) 100 250
4700 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC1A472L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1A472( ) 100 250
5600 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1A562( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1A562S( ) 100 250
6800 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1A682 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1A682S( ) 100 250
8200 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1A822L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1A822 50
10000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1A103 50
12000 18 40 3735 0.014 5000 0.80 7.5 EEUFC1A123 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-67 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
16
15 4 7652.000 1000 0.45 1.5 5.0 2.5 EEAFC1C150( ) 200 2000
27 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1C270( ) 200 2000
39 4 11 120 1.301000 0.45 1.55.02.5
EEUFC1C390( ) 200 2000
47 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1C470( ) 200 2000
56 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1C560( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1C560( ) 200 2000
68 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1C680( ) 200 2000
82 5 15 235 0.500 1000 0.50 2.05.02.5
EEUFC1C820( ) 200 2000
100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C101( ) 200 2000
120 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C121( ) 200 2000
180 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1C181( ) 200 2000
220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C221( ) 200 1000
270 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C271( ) 200 1000
330 8 11.5 555 0.117 2 000 0.60 3.5 5.0 EEUFC1C331( ) 200 1000
390 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C391( ) 200 500
470 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1C471L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C471( ) 200 500
560 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C561( ) 200 500
680 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1C681L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C681( ) 200 500
820 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C821( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1C821S( ) 200 500
1000 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C102S( ) 200 500
10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C102( ) 200 500
1200 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C122( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C122S( ) 100 250
1500
10 30 1815 0.035 3000 0.60 5.0 EEUFC1C152L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1C152( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C152S( ) 100 250
1800 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C182( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1C182S( ) 100 250
2200 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C222( ) 200 500
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C222S( ) 100 250
2700 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1C272L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C272( ) 100 250
3300 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1C332 100
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C332S( ) 100 250
3900 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1C392( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C392S( ) 100 250
4700 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1C472 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1C472S( ) 100 250
5600 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1C562L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1C562 50
6800 16 40 3360 0.015 5000 0.80 7.5 EEUFC1C682 100
8200 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1C822 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-68 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
25
10 4 7652.000 1000 0.45 1.5 5.0 2.5 EEAFC1E100( ) 200 2000
22 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1E220( ) 200 2000
27 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1E270( ) 200 2000
39 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1E390( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1E390( ) 200 2000
47 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1E470( ) 200 2000
56 5 15 235 0.500 1000 0.50 2.05.02.5
EEUFC1E560( ) 200 2000
82 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E820( ) 200 2000
100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E101S( ) 200 2000
120 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1E121( ) 200 2000
180 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E181( ) 200 1000
220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E221( ) 200 1000
270 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E271( ) 200 500
330 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1E331L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E331( ) 200 500
390 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E391( ) 200 500
470 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1E471L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E471( ) 200 500
560 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E561( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1E561S( ) 200 500
680 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E681( ) 200 500
820 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1E821( ) 200 500
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E821S( ) 200 500
1000
10 30 1815 0.035 3000 0.60 5.0 EEUFC1E102L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E102( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1E102S( ) 100 250
1200 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E122( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1E122S( ) 100 250
1500 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E152( ) 200 500
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1E152S( ) 100 250
1800 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1E182L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1E182( ) 100 250
2200 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1E222 100
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1E222S( ) 100 250
2700 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1E272( ) 100 250
3300 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1E332 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1E332S( ) 100 250
3900 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1E392L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1E392 50
4700 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1E472 50
5600 18 40 3735 0.014 5000 0.80 7.5 EEUFC1E562 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-69 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
35
6.8 4 7 65 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1V6R8( ) 200 2000
12 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1V120( ) 200 2000
18 4 11 120 1.300 1000 0.45 1.55.02.5
EEUFC1V180( ) 200 2000
22 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1V220( ) 200 2000
27 5 11 175 0.800 1000 0.50 2.05.02.5
EEUFC1V270( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1V270( ) 200 2000
33 5 11 175 0.080 1000 0.50 2.05.02.5
EEUFC1V330( ) 200 2000
39 5 15 235 0.500 1000 0.50 2.05.02.5
EEUFC1V390( ) 200 2000
47 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V470( ) 200 2000
56 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V560( ) 200 2000
68 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V680( ) 200 2000
82 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1V820( ) 200 2000
100 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V101( ) 200 1000
120 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V121( ) 200 1000
150 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V151( ) 200 1000
180 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V181( ) 200 500
220 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1V221L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V221( ) 200 500
270 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V271( ) 200 500
330 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1V331L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V331( ) 200 500
390 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V391( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1V391S( ) 200 500
470 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V471( ) 200 500
560 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1V561( ) 200 500
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V561S( ) 200 500
680
10 30 1815 0.035 3000 0.60 5.0 EEUFC1V681L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V681( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1V681S( ) 100 250
820 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V821L( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1V821( ) 100 250
1000 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V102( ) 200 500
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V102S( ) 100 250
1200 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1V122L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V122( ) 100 250
1500
12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1V152L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V152( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V152S( ) 100 250
1800
12.5 40 2655 0.018 5000 0.80 5.0 EEUFC1V182L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V182( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V182S( ) 100 250
2200 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1V222 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1V222S( ) 100 250
2700 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1V272L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1V272 50
3300 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1V332 50
3900 18 40 3735 0.014 5000 0.80 7.5 EEUFC1V392 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-70 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
50
1.0 5 11 20 2.400 1000 0.50 2.0 5.0 2.5 EEUFC1H1R0( )✽✽✽ 200 2000
2.2 5 11 45 1.800 1000 0.50 2.0 5.0 2.5 EEUFC1H2R2( ) 200 2000
3.3 5 11 65 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H3R3( ) 200 2000
4.7 5 11 95 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H4R7( ) 200 2000
10 4 11 90 2.500 1000 0.45 1.5 5.0 2.5 EEUFC1H100( ) 200 2000
5 11 125 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H100L( ) 200 2000
12 5 11 135 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H120( ) 200 2000
15 5 11 145 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H150( ) 200 2000
18 5 11 155 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H180( ) 200 2000
22 5 11 155 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1H220( ) 200 2000
27 5 15 215 0.900 1000 0.50 2.0 5.0 2.5 EEUFC1H270( ) 200 2000
33 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 EEUFC1H330( ) 200 2000
39 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 EEUFC1H390( ) 200 2000
47 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 EEUFC1H470( ) 200 2000
56 6.3 15 360 0.400 1000 0.50 2.5 5.0 2.5 EEUFC1H560( ) 200 2000
68 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H680( ) 200 1000
82 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H820( ) 200 1000
100 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H101( ) 200 500
120 8 15 635 0.155 2000 0.60 3.5 5.0 EEUFC1H121L( ) 200 1000
10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H121( ) 200 500
150 10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H151( ) 200 500
180 8 20 860 0.120 2000 0.60 3.5 5.0 EEUFC1H181L( ) 200 1000
10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H181( ) 200 500
220 10 20 1030 0.090 3000 0.60 5.0 5.0 EEUFC1H221( ) 200 500
12.5 15 1150 0.110 5000 0.60 5.0 5.0 EEUFC1H221S( ) 200 500
270 10 25 1200 0.082 3000 0.60 5.0 5.0 EEUFC1H271( ) 200 500
330 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H331L 100
12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H331( ) 200 500
390 12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H391( ) 200 500
16 15 1610 0.080 5000 0.80 7.5 7.5 EEUFC1H391S( ) 100 250
470 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H471L 100
12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H471( ) 200 500
560 12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H561( ) 200 500
18 15 1900 0.068 5000 0.80 7.5 7.5 EEUFC1H561S( ) 100 250
680 12.5 30 2215 0.040 5000 0.80 5.0 EEUFC1H681L 100
16 20 1835 0.048 5000 0.80 7.5 7.5 EEUFC1H681( ) 100 250
820 12.5 35 2285 0.034 5000 0.80 5.0 EEUFC1H821L 100
18 20 2420 0.042 5000 0.80 7.5 7.5 EEUFC1H821( ) 100 250
1000 12.5 40 2590 0.030 5000 0.80 5.0 EEUFC1H102L 100
16 25 2235 0.034 5000 0.80 7.5 7.5 EEUFC1H102( ) 100 250
1200 16 31.5 2700 0.028 5000 0.80 7.5 EEUFC1H122 100
18 25 2610 0.029 5000 0.80 7.5 7.5 EEUFC1H122S( ) 100 250
1500 16 35.5 2790 0.025 5000 0.80 7.5 EEUFC1H152L 100
1800 16 40 2845 0.023 5000 0.80 7.5 EEUFC1H182L 100
18 31.5 3000 0.025 5000 0.80 7.5 EEUFC1H182 50
2200 18 35.5 3100 0.023 5000 0.80 7.5 EEUFC1H222 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
01 Oct. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-71 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
63
6.8 4 11 80 3.500 1000 0.45 1.5 5.0 2.5 EEUFC1J6R8( ) 200 2000
12 5 11 145 2.000 1000 0.50 2.0 5.0 2.5 EEUFC1J120( ) 200 2000
18 5 15 200 1.300 1000 0.50 2.0 5.0 2.5 EEUFC1J180( ) 200 2000
22 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5 EEUFC1J220( ) 200 2000
33 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5 EEUFC1J330( ) 200 2000
39 6.3 15 330 0.700 1000 0.50 2.5 5.0 2.5 EEUFC1J390( ) 200 2000
47 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J470( ) 200 1000
56 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J560( ) 200 1000
68 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J680( ) 200 1000
82 10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J820( ) 200 500
100 8 15 535 0.230 2000 0.60 3.5 5.0 EEUFC1J101L( ) 200 1000
10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J101( ) 200 500
120 10 16 600 0.194 3000 0.60 5.0 5.0 EEUFC1J121( ) 200 500
150 8 20 690 0.178 2000 0.60 3.5 5.0 EEUFC1J151( ) 200 1000
180 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J181( ) 200 500
12.5 15 1020 0.150 5000 0.60 5.0 5.0 EEUFC1J181S( ) 200 500
220
10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J221X( ) 200 500
10 25 1050 0.130 3000 0.60 5.0 5.0 EEUFC1J221( ) 200 500
12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J221S( ) 200 500
270 16 15 1410 0.090 5000 0.80 7.5 7.5 EEUFC1J271( ) 100 250
330 10 30 1300 0.090 3000 0.60 5.0 EEUFC1J331L 100
12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J331( ) 200 500
390 12.5 25 1720 0.070 5000 0.60 5.0 5.0 EEUFC1J391( ) 200 500
18 15 1690 0.086 5000 0.80 7.5 7.5 EEUFC1J391S( ) 100 250
470 12.5 30 2090 0.055 5000 0.80 5.0 EEUFC1J471L 100
16 20 1765 0.059 5000 0.80 7.5 7.5 EEUFC1J471( ) 100 250
560 16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J561( ) 100 250
680
12.5 35 2265 0.047 5000 0.80 5.0 EEUFC1J681L 100
16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J681( ) 100 250
18 20 2290 0.055 5000 0.80 7.5 7.5 EEUFC1J681S( ) 100 250
820
12.5 40 2560 0.042 5000 0.80 5.0 EEUFC1J821L 100
16 31.5 2670 0.043 5000 0.80 7.5 EEUFC1J821 100
18 25 2585 0.043 5000 0.80 7.5 7.5 EEUFC1J821S( ) 100 250
1000 16 31.5 2670 0.043 5000 0.80 7.5 EEUFC1J102U 100
16 35.5 2770 0.036 5000 0.80 7.5 EEUFC1J102 100
1200 16 40 2825 0.030 5000 0.80 7.5 EEUFC1J122L 100
18 31.5 2950 0.032 5000 0.80 7.5 EEUFC1J122 50
1500 18 35.5 3095 0.030 5000 0.80 7.5 EEUFC1J152 50
1800 18 40 3205 0.025 5000 0.80 7.5 EEUFC1J182 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
01 Oct. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-72 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
100
5.6 5 11 80 4.10 1000 0.5 2.0 5.0 2.5 EEUFC2A5R6( ) 200 2000
8.2 5 15 90 2.80 1000 0.5 2.0 5.0 2.5 EEUFC2A8R2( ) 200 2000
12 6.3 11.2 114 1.80 10 0 0 0.5 2.5 5.0 2.5 EEUFC2A120( ) 200 2000
18 6.3 15 155 1.10 1000 0.5 2.5 5.0 2.5 EEUFC2A180( ) 200 2000
22 8 11.5 260 0.680 2000 0.6 3.5 5.0 EEUFC2A220( ) 200 1000
33 8 15 340 0.450 2000 0.6 3.5 5.0 EEUFC2A330L( ) 200 1000
10 12.5 306 0.530 3000 0.6 5.0 5.0 EEUFC2A330( ) 200 500
39 8 20 455 0.330 2000 0.6 5.0 5.0 EEUFC2A390L( ) 200 1000
10 16 400 0.360 3000 0.6 5.0 5.0 EEUFC2A390( ) 200 500
56 10 20 463 0.240 3000 0.6 5.0 5.0 EEUFC2A560( ) 200 500
68 10 25 599 0.210 3000 0.6 5.0 5.0 EEUFC2A680L( ) 200 500
12.5 15 511 0.230 5000 0.6 5.0 5.0 EEUFC2A680( ) 200 500
100 10 30 698 0.150 3000 0.6 5.0 EEUFC2A101L 100
12.5 20 671 0.180 5000 0.6 5.0 5.0 EEUFC2A101( ) 200 500
120 16 15 793 0.140 5000 0.8 7.5 7.5 EEUFC2A121S( ) 100 250
150 12.5 25 807 0.110 5000 0.6 5.0 5.0 EEUFC2A151( ) 200 500
18 15 917 0.120 5000 0.8 7.5 7.5 EEUFC2A151S( ) 100 250
180 12.5 30 937 0.098 5000 0.8 5.0 EEUFC2A181L 100
16 20 995 0.110 5000 0.8 7.5 7.5 EEUFC2A181( ) 100 250
220 12.5 35 1040 0.087 5000 0.8 5.0 EEUFC2A221L 100
16 25 1170 0.089 5000 0.8 7.5 7.5 EEUFC2A221( ) 100 250
270 12.5 40 1130 0.072 5000 0.8 5.0 EEUFC2A271L 100
18 20 1230 0.080 5000 0.8 7.5 7.5 EEUFC2A271S( ) 100 250
330 16 31.5 1520 0.062 5000 0.8 7.5 EEUFC2A331 100
18 25 1420 0.070 5000 0.8 7.5 7.5 EEUFC2A331S( ) 100 250
390 16 35.5 1730 0.053 5000 0.8 7.5 EEUFC2A391L 100
18 31.5 1600 0.062 5000 0.8 7.5 EEUFC2A391 50
470 16 40 1920 0.047 5000 0.8 7.5 EEUFC2A471 100
560 18 35.5 1770 0.041 5000 0.8 7.5 EEUFC2A561 50
680 18 40 2300 0.036 5000 0.8 7.5 EEUFC2A681 50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
01 Oct. 2013
