SNAP-ODC5SNK - OPTO 22 - Product.Network

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 1

DATA SHEET

Form 1144-190509

SNAP DIGITAL OUTPUT MODULES

Features

Four channels per module

Convenient pluggable wiring terminals; accepts

22 to 14 AWG wire

Powered by a single 5-volt supply

Channel-specific LEDs

Operating temperature: -20 to 70 °C

UL and CE approved (most modules); Factory Mutual

approved (part numbers ending in FM)

DESCRIPTION

Opto 22 SNAP I/O digital output modules are part of

the SNAP PAC System.

Choose from AC or DC models. Optical isolation on all

solid-state modules provides 4,000 volts of transient

(4000 V for 1 ms) protection for sensitive control

electronics from industrial field signals.

Most SNAP digital modules have removable top-

mounted connectors to provide easy access for field

wiring. All operate on 5 VDC control logic. Each digital

module features integral channel-specific LEDs for

convenient troubleshooting and maintenance.

Each module is factory tested twice before shipment,

and most modules are UL and CE approved. In

addition, part numbers ending in FM are Factory

Mutual approved.

SNAP output modules are used to switch up to four

separate AC or DC loads. Output modules that are

fused use a standard fuse with a convenient handle

for easy replacement. DC outputs are available in

either a source or sink configuration. AC outputs are

zero voltage turn on and zero current turn off for

transient-free switching.

SNAP-OAC5MA and SNAP-ODC5MA are special

modules featuring manual-on/manual-off/automatic

switches, ideal for diagnostic testing of control

applications. The switches override output from the

application, so you can quickly check field device

wiring. These modules each contain four isolated

channels.

The SNAP-OAC5-i, SNAP-ODC5-i, and SNAP-ODC5A-i

modules provide four isolated output channels.

>

Part Numbers

Part Description See

pages

SNAP-OAC5 SNAP 4-channel 12–250 VAC output, 5 VDC logic 3, 5

SNAP-OAC5MA SNAP 4-channel isolated 12–250 VAC output, 5 VDC logic

with manual/auto switches 3, 6

SNAP-OAC5FM SNAP 4-channel 12–250 VAC output, 5 VDC logic 4, 5

SNAP-OAC5-i SNAP 4-channel isolated 12–250 VAC output, 5 VDC logic 3, 7

SNAP-OAC5-iFM SNAP 4-channel isolated 12–250 VAC output, 5 VDC logic 4, 7

SNAP-ODC5SRC SNAP 4-channel 5–60 VDC output, 5 VDC logic source 8, 12

SNAP-ODC5SRCFM SNAP 4-channel 5–60 VDC output, 5 VDC logic source 10, 12

SNAP-ODC5SNK SNAP 4-channel 5–60 VDC output, 5 VDC logic sink 8, 13

SNAP-ODC5SNKFM SNAP 4-channel 5–60 VDC output, 5 VDC logic sink 10, 13

SNAP-ODC5ASNK SNAP 4-channel 5–200 VDC output, 5 VDC logic sink 9, 13

SNAP-ODC5MA SNAP 4-channel isolated 5–60 VDC output, 5 VDC logic

with manual/auto switches 9, 14

SNAP-ODC5-i SNAP 4-channel isolated 5–60 VDC output, 5 VDC logic 9, 15

SNAP-ODC5-iFM SNAP 4-channel isolated 5–60 VDC output, 5 VDC logic 11, 15

SNAP-ODC5A-i SNAP 4-channel isolated 5–200 VDC output, 5 VDC logic 9, 15

SNAP-ODC5A-iFM SNAP 4-channel isolated 5–200 VDC output, 5 VDC logic 11, 15

SNAP-RETN4 SNAP 4-module retention rail (OEM) --------

SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM) --------

SNAP-RETN6 SNAP 6-module retention rail (OEM) --------

SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM) --------

SNAP-FUSE4AB SNAP 4-amp fuse, 25-pack --------

SNAP-MODFUSEH SNAP digital output module fuse holder, 10-pack --------

SNAP Digital Output Modules

PAGE 2

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

For Ethernet-based applications requiring higher density of digital I/O

points, see Opto 22 form #1556, the SNAP High-Density Digital Module

Data Sheet.

I/O Processor Compatibility

SNAP digital output modules are compatible with all SNAP PAC brains

and rack-mounted controllers, including both standard wired models

and Wired+Wireless™ models.

Notes for legacy hardware: SNAP digital output modules are also

compatible with SNAP Ultimate, SNAP Ethernet, and SNAP Simple

brains, as well as other SNAP brains such as the serial B3000 and the

B3000HA. These modules can also be used on B-series and M-series

mounting racks.

INSTALLATION

The following diagram shows part of a SNAP mounting rack. The rack

is shown without screw connectors.

Modules snap securely into place in the row of connectors on the

rack. Each module connector has a number. Digital output modules

and other types of SNAP I/O modules are mounted on the module

connectors starting at module position zero.

NOTE: Check the data sheet or user’s guide for the brain or on-the-

rack controller you are using to determine module features available

and any restrictions on module placement.

1. Place the rack so that the module connector numbers are right-

side up, with zero on the left, as shown in the diagram above. (If

your rack has screw connectors, the screw connectors will be at

the bottom.)

2. Position the module over the module connector, aligning the

small slot at the base of the module with the retention bar on the

rack. When positioning modules next to each other, be sure to

align the male and female module keys at the tops of the

modules before snapping a module into position.

3. With the module correctly aligned, push on the module to snap it

into place.

4. Use standard 4-40 x 1/2 truss-head Phillips hold-down screws to

secure both sides of each module.

CAUTION: Do not over-tighten screws. See Specifications.

5. Follow the wiring diagrams beginning on page 5 to attach

modules to the devices they monitor.

Modules require a special tool (provided) for removal.

Module

position zero Module connectors

Processor connector Retention bar

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 3

DATA SHEET

Form 1144-190509

SPECIFICATIONS—AC MODULES

SNAP-OAC5 SNAP-OAC5MA SNAP-OAC5-i

Key Feature -- Diagnostic switches

Four isolated channels Four isolated channels

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Line Voltage - Range 12–250 VAC 12–250 VAC 12–250 VAC

Line Voltage - Nominal 120/240 VAC 120/240 VAC 120/240 VAC

Current Rating

0 °C to 70 °C Ambient 3 amps per module 3 amps per module 3 amps per module

One Cycle Surge 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz)

Minimum Load Current 20 mA 20 mA 20 mA

Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps

Off-state Leakage at

Nominal Voltage - 60 Hz

2.5 mA @ 240 VAC

1.25 mA @ 120 VAC

2.5 mA @ 240 VAC

1.25 mA @ 120 VAC

2.5 mA @ 240 VAC

1.25 mA @ 120 VAC

Peak Blocking Voltage 500 V 500 V 500 V

Operating Frequency 25–65 Hz 25–65 Hz 25–65 Hz

dV/ dt - Off-state 200 volts/msec 200 volts/msec 200 volts/msec

dV/ dt - Commutating Snubbed for rated 0.5 power factor

load

Snubbed for rated 0.5 power

factor load

Snubbed for rated 0.5 power

factor load

Fuse

(Common to all Channels)

250 VAC - 4A 5x20 mm

Fast-acting Bell Fuse Part: BEL 5HF4

Opto 22 Part: SNAP-FUSE4AB

Has four isolated channels.

User must provide own fusing.

Has four isolated channels.

User must provide own fusing.

Channel-to-channel isolation Not applicable 300 VAC

(1500 V transient)

300 VAC

(1500 V transient)

Logic Side Ratings

Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA

Dropout Voltage 1 VDC 1 VDC 1 VDC

Control Resistance 220 ohms 220 ohms 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum

Module Ratings

Number of Channels Per Module 4 4 4

Turn-on Time 0.5 cycle maximum

(zero volts crossover)

0.5 cycle maximum

(zero volts crossover)

0.5 cycle maximum

(zero volts crossover)

Turn-off Time 0.5 cycle maximum

(zero current crossover)

0.5 cycle maximum

(zero current crossover)

0.5 cycle maximum

(zero current crossover)

Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 ° to 70 °C, operating

-40 ° to 85 °C, storage

-20 ° to 70 °C, operating

-40 ° to 85 °C, storage

-20 ° to 70 °C, operating

-40 ° to 85 °C, storage

Wire size range 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG

Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS

Warranty Lifetime 30 months Lifetime

PAGE 4

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

SPECIFICATIONS—AC MODULES (CONTINUED)

SNAP-OAC5-FM SNAP-OAC5-i-FM

Key Feature Factory Mutual approved Four isolated channels

Factory Mutual approved

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Line Voltage - Range 12–250 VAC 12–250 VAC

Line Voltage - Nominal 120/240 VAC 120/240 VAC

Current Rating

0 °C to 70 °C Ambient 3 amps per module 3 amps per module

One Cycle Surge 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz)

Minimum Load Current 20 mA 20 mA

Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps

Off-state Leakage at Nominal Voltage - 60 Hz 2.5 mA @ 240 VAC

1.25 mA @ 120 VAC

2.5 mA @ 240 VAC

1.25 mA @ 120 VAC

Peak Blocking Voltage 500 V 500 V

Operating Frequency 25–65 Hz 25–65 Hz

dV/ dt - Off-state 200 volts/msec 200 volts/msec

dV/ dt - Commutating Snubbed for rated 0.5 power factor load Snubbed for rated 0.5 power

factor load

Fuse

(Common to all Channels)

250 VAC - 4A 5x20 mm

Fast-acting Bell Fuse Part No. BEL 5HF4

Opto 22 Part No. SNAP-FUSE4AB

Has four isolated channels.

User must provide own fusing.

Channel-to-channel isolation Not applicable 300 VAC

(1500 V transient)

Logic Side Ratings

Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA

Dropout Voltage 1 VDC 1 VDC

Control Resistance 220 ohms 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum

Module Ratings

Channels Per Module 4 4

Turn-on Time 0.5 cycle maximum

(zero volts crossover)

0.5 cycle maximum

(zero volts crossover)

Turn-off Time 0.5 cycle maximum

(zero current crossover)

0.5 cycle maximum

(zero current crossover)

Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 ° to 70 °C, operating

-40 ° to 85 °C, storage

-20 ° to 70 °C, operating

-40 ° to 85 °C, storage

Wire size range 22 to 14 AWG 22 to 14 AWG

Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS

Warranty Lifetime Lifetime

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 5

DATA SHEET

Form 1144-190509

SCHEMATICS

SNAP-OAC5 Output Module Part Number Description

SNAP-OAC5 4-channel AC output 12–250 VAC 5 VDC logic

SNAP-OAC5FM 4-channel AC output 12–250 VAC 5 VDC logic,

Factory Mutual approved

PAGE 6

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

SCHEMATICS

SNAP-OAC5MA Output Module

With Manual/Auto Switches

Part Number Description

SNAP-OAC5MA 4-channel isolated AC output 12–250 VAC, 5

VDC logic, with manual/auto switch

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 7

DATA SHEET

Form 1144-190509

SCHEMATICS

SNAP-OAC5i Isolated Output Module Part Number Description

SNAP-OAC5-i 4-channel isolated AC output 12–250 VAC,

5 VDC logic

SNAP-OAC5-iFM 4-channel isolated AC output 12–250 VAC,

5 VDC logic, Factory Mutual approved

PAGE 8

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

SPECIFICATIONS—DC MODULES

SNAP-ODC5SRC SNAP-ODC5SNK

Key Feature Load sourcing Load sinking

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Line Voltage - Range 5–60 VDC 5–60 VDC

Line Voltage - Nominal 5–48 VDC 5–48 VDC

Current Rating 0 °C to 70 °C Ambient 3 amps per module 3 amps per module

Surge Current 5 amps peak for

1 second

5 amps peak for

1 second

Minimum Load 20 mA 20 mA

Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps

Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC

Peak Blocking Voltage 60 VDC 60 VDC

Fuse

(Common to all Channels)

250 VAC - 4A 5x20 mm

Fast-acting Bell Fuse Part No.

BEL 5HF4

Opto 22 Part SNAP-FUSE4AB

250 VAC - 4A 5x20 mm

Fast-acting Bell Fuse Part No.

BEL 5HF4

Opto 22 Part SNAP-FUSE4AB

Channel-to-channel isolation Not applicable Not applicable

Logic Side Ratings

Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA

Dropout Voltage 1 VDC 1 VDC

Control Resistance 220 ohms 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum

Module Ratings

Number of Channels Per Module 4 4

Turn-on Time 100 usec 100 usec

Turn-off Time 750 usec 750 usec

Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 to 70 °C, operating

-40 to 85 °C, storage

-20 to 70 °C, operating

-40 to 85 °C, storage

Wire size range 22 to 14 AWG 22 to 14 AWG

Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, CSA, RoHS, DFARS

Warranty Lifetime Lifetime

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 9

DATA SHEET

Form 1144-190509

SPECIFICATIONS—DC MODULES (CONTINUED)

SNAP-ODC5MA SNAP-ODC5-i SNAP-ODC5A-i SNAP-ODC5ASNK

Key Feature Diagnostic switches

Four isolated channels Four isolated channels Four isolated channels Load sinking

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Line Voltage - Range 5–60 VDC 5–60 VDC 5–200 VDC 5–200 VDC

Line Voltage - Nominal 5–48 VDC 5–48 VDC 5–200 VDC 5–200 VDC

Current Rating

0 °C to 70 °C Ambient

2 amps per module

0.5 amps per channel 3 amps per module 3 amps per module 3 amps per module

Surge Current 1.5 amps peak for

1 second

5 amps peak for

1 second

5 amps peak for

1 second

5 amps peak for

1 second

Minimum Load 20 mA 20 mA 20 mA 20 mA

Output Voltage Drop 1.6 volts max.@

0.75 amps

1.6 volts max.@

0.75 amps

1.6 volts max.@

0.75 amps

1.6 volts max.@

0.75 amps

Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC 1 mA @ 200 VDC 1 mA @ 200 VDC

Peak Blocking Voltage 60 VDC 60 VDC 200 VDC 200 VDC

Fuse

(Common to all Channels)

Has four isolated

channels. User must

provide own fusing.

Has four isolated

channels. User must

provide own fusing.

Has four isolated

channels. User must

provide own fusing.

250 VAC - 4A 5x20 mm

Fast-acting Bell Fuse

Part: BEL 5HF4

Opto 22 Part: SNAP-

FUSE4AB

Channel-to-channel

isolation

300 VAC

(1500 V transient)

300 VAC

(1500 V transient)

300 VAC

(1500 V transient) Not applicable

Logic Side Ratings

Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA

Dropout Voltage 1 VDC 1 VDC 1 VDC 1 VDC

Control Resistance 220 ohms 220 ohms 220 ohms 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum

Module Ratings

Number of Channels Per

Module 4 4 4 4

Turn-on Time 100 usec 100 usec 100 usec 100 usec

Turn-off Time 750 usec 750 usec 750 usec 750 usec

Isolation (Field Side to Logic

Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 to 70 °C, operating

-40 to 85 °C, storage

-20 to 70 °C, operating

-40 to 85 °C, storage

-20 to 70 °C, operating

-40 to 85 °C, storage

-20 to 70 °C, operating

-40 to 85 °C, storage

Wire size range 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG

Agency Approvals UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS

Warranty 30 months Lifetime Lifetime Lifetime

PAGE 10

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

SPECIFICATIONS—DC MODULES (CONTINUED)

SNAP-ODC5SRCFM SNAP-ODC5SNKFM

Key Feature Factory Mutual approved Factory Mutual approved

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Line Voltage - Range 5–60 VDC 5–60 VDC

Line Voltage - Nominal 5–48 VDC 5–48 VDC

Current Rating 0°C to 70°C Ambi-

ent 3 amps per module 3 amps per module

Surge Current 5 amps peak for

1 second

5 amps peak for

1 second

Minimum Load 20 mA 20 mA

Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps

Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC

Peak Blocking Voltage 60 VDC 60 VDC

Fuse

(Common to all Channels)

250 VAC - 4A 5x20 mm

Fast-acting Bell Fuse Part No. BEL 5HF4

Opto 22 Part SNAP-FUSE4AB

250 VAC - 4A 5x20 mm

Fast-acting Bell Fuse Part No. BEL 5HF4

Opto 22 Part SNAP-FUSE4AB

Logic Side Ratings

Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA

Dropout Voltage 1 VDC 1 VDC

Control Resistance 220 ohms 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum

Module Ratings

Number of Channels Per Module 4 4

Turn-on Time 100 usec 100 usec

Turn-off Time 750 usec 750 usec

Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 to 70 °C, operating

-40 to 85 °C, storage

-20 to 70 °C, operating

-40 to 85 °C, storage

Wire size range 22 to 14 AWG 22 to 14 AWG

Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS

Warranty Lifetime Lifetime

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 11

DATA SHEET

Form 1144-190509

SPECIFICATIONS—DC MODULES (CONTINUED)

SNAP-ODC5-iFM SNAP-ODC5A-iFM

Key Feature Four isolated channels

Factory Mutual approved

Four isolated channels

Factory Mutual approved

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Line Voltage - Range 5–60 VDC 5–200 VDC

Line Voltage - Nominal 5–48 VDC 5–200 VDC

Current Rating 0°C to 70°C

Ambient 3 amps per module 3 amps per module

Surge Current 5 amps peak for 1 second 5 amps peak for 1 second

Minimum Load 20 mA 20 mA

Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps

Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC

Peak Blocking Voltage 60 VDC 200 VDC

Fuse (Common to all Channels) Has four isolated channels.

User must provide own fusing.

Has four isolated channels.

User must provide own fusing.

Logic Side Ratings

Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA

Dropout Voltage 1 VDC 1 VDC

Control Resistance 220 ohms 220 ohms

Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum

Module Ratings

Number of Channels Per Module 4 4

Turn-on Time 100 usec 100 usec

Turn-off Time 750 usec 750 usec

Isolation (Field Side to Logic

Side) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 ° to 70 °C, operating

-40 ° to 85 °C, storage

-20 ° to 70 °C, operating

-40 ° to 85 °C, storage

Wire size range 22 to 14 AWG 22 to 14 AWG

Agency Approvals CE, FM, ATEX, RoHS, DFARS CE, FM, RoHS, DFARS

Warranty Lifetime Lifetime

PAGE 12

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

SCHEMATICS

SNAP-ODC5SRC Output Module—

Sourcing

Part Number Description

SNAP-ODC5SRC 4-channel DC output 5–60 VDC logic source

SNAP-ODC5SRCFM 4-channel DC output 5–60 VDC logic source,

Factory Mutual approved

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 13

DATA SHEET

Form 1144-190509

SCHEMATICS

SNAP-ODC5SNK and SNAP-ODC5ASNK

Output Modules—Sinking

Part Number Description

SNAP-ODC5SNK 4-channel DC output 5–60 VDC logic sink

SNAP-ODC5SNKFM 4-channel DC output 5–60 VDC logic sink,

Factory Mutual approved

SNAP-ODC5ASNK 4-channel DC output 5–200 VDC logic sink

PAGE 14

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

SCHEMATICS

SNAP-ODC5MA Output Module with

Manual/Auto Switches

Part Number Description

SNAP-ODC5MA 4-channel isolated DC output 5–60 VDC,

5 VDC logic, with manual/auto switches

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 15

DATA SHEET

Form 1144-190509

SCHEMATICS

SNAP-ODC5-i and SNAP-ODC5A-i

Isolated Output Module

Part Number Description

SNAP-ODC5-i 4-channel isolated DC output 5–60 VDC, 5 VDC logic

SNAP-ODC5A-i 4-channel isolated DC output 5–200 VDC, 5 VDC logic

SNAP-ODC5-iFM 4-channel isolated DC output 5–60 VDC, 5 VDC logic,

Factory Mutual approved

SNAP-ODC5A-iFM 4-channel isolated DC output 5–200 VDC, 5 VDC

logic, Factory Mutual approved

PAGE 16

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

DIMENSIONAL DRAWING

All Models Except MA

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE 17

DATA SHEET

Form 1144-190509

DIMENSIONAL DRAWING

All MA Models

PAGE 18

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

DIMENSIONAL DRAWING

IMPORTANT: The mounting rack connector has 24 pins; the module

connector has 20 pins. The extra pins on the mounting rack connector

prevent misalignment of the module during installation.

All Models

PAGE 19

OPTO 22 • www.opto22.com SALES • sales@opto22.com SUPPORT • support@opto22.com

43044 Business Park Dr. Temecula, CA 92590-3614 800-321-6786 • 1-951-695-3000 800-835-6786 • 1-951-695-3080

© 1999-2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

DATA SHEET

Form 1144-190509

DIMENSIONAL DRAWING

SNAP Digital Module Mounted on SNAP Rack

All Models

OPTO 22 • www.opto22.com SALES • sales@opto22.com SUPPORT • support@opto22.com

43044 Business Park Dr. Temecula, CA 92590-3614 800-321-6786 • 1-951-695-3000 800-835-6786 • 1-951-695-3080

© 2001–2019 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

More about Opto 22

Form 1335-181003

PRODUCTS

Opto 22 develops and manufactures reliable, easy-to-use, open

standards-based hardware and software products.

Industrial automation, process control, building automation, industrial

refrigeration, remote monitoring, data acquisition, and industrial

internet of things (IIoT) applications worldwide all rely on Opto 22.

groov EPIC® System

Opto 22’s groov Edge Programmable Industrial Controller (EPIC)

system is the culmination of over 40 years of experience in designing

products for the automation industry.

groov EPIC gives you an industrially hardened system with

guaranteed-for-life I/O, a flexible

Linux®-based controller with

gateway functions, and software for

your IIoT application or any

application.

groov EPIC I/O

I/O provides the local connection to

sensors and equipment. groov I/O

offers up to 24 channels on each I/O

module, with a spring-clamp

terminal strip, integrated wireway,

and swing-away cover.

Opto 22 I/O is so reliable, we can

afford to guarantee it for life. groov I/O is hot swappable, UL

Hazardous Locations approved, and ATEX compliant.

groov EPIC Processor

The heart of the system is the groov EPIC processor. It handles a wide

range of digital, analog, and serial functions for data collection,

remote monitoring, process control, and discrete and hybrid

manufacturing.

In addition, the EPIC provides secure data communications among

physical assets, control systems, software applications, online services,

and more, both on premises and in the cloud.

Configuring and troubleshooting I/O and networking is easier with

the EPIC’s integrated high-resolution touchscreen. Authorized users

can see your groov View HMI locally on the touchscreen or on a

monitor connected via the HDMI or USB ports.

groov EPIC Software

Software included in the groov EPIC controller:

•PAC Control engine to run PAC Control strategies and PAC Display

projects

•CODESYS Runtime engine to run IEC61131-3 compliant programs

built with CODESYS Development System

•Access to the Linux operating system through a secure shell (SSH)

to download and run custom applications

•groov View for building and viewing your own device-

independent HMI

•Node-RED for creating simple logic flows from pre-built nodes

•Ignition Edge® from Inductive Automation®, with OPC-UA drivers

to Allen-Bradley®, Siemens®, and other control systems, and

MQTT/Sparkplug communications for efficient IIoT data transfer

Older products

From solid state relays (our first products) to world-famous G4 and

SNAP I/O, to SNAP PAC controllers, Opto 22 products last a long time.

You can count on us to give you the reliability and service you expect.

QUALITY

Founded in 1974, Opto 22 has

established a worldwide reputation for

high-quality products. All are made in

the U.S.A. at our manufacturing facility

in Temecula, California.

Because we test each product twice

before it leaves our factory rather than

testing a sample of each batch, we can

guarantee most solid-state relays and

optically isolated I/O modules for life.

FREE PRODUCT SUPPORT

Opto 22’s California-based Product Support Group offers free,

comprehensive technical support for Opto 22 products from

engineers with decades of training and experience. Support is

available in English and Spanish by phone or email, Monday–Friday,

7 a.m. to 5 p.m. PST.

Support is always available on our website, including online training,

how-to videos, user’s guides, the Opto 22 KnowledgeBase,

troubleshooting tips, and OptoForums. In addition, free hands-on

training is available at our Temecula, California headquarters, and you

can register online.

PURCHASING OPTO 22 PRODUCTS

Opto 22 products are sold directly and through a worldwide network

of distributors, partners, and system integrators. For more information,

contact Opto 22 headquarters at 800-321-6786 (toll-free in the U.S.

and Canada) or +1-951-695-3000, or visit our website at

www.opto22.com.