Document: SCD 27284
SiBar Thyristor Surge Protectors Status: Released
© 2009 Tyco Electronics Corporation. All rights Reserved. 1 Rev: C Date: SEPTEMBER 29, 2009
SiBar Thyristor Surge Protectors
TVBxxxSA-L Series
Raychem Circuit Protection's SiBar thyristor surge
protection devices are designed to help protect sensitive
telecommunication equipment from the hazards caused
by lightning, power contact, and power induction. These
devices have a high electrical surge capability to help
protect against transient faults and a high off-state
impedance, rendering them virtually transparent during
normal system operation.
SiBar thyristor surge protectors are designed to assist
telecommunication and computer telephony equipment
in meeting the applicable requirements and industry
specifications.
Benefits:
• Helps provide protection for sensitive telecom
electronic equipment
• Low leakage current
• Low power dissipation
• Fast, reliable operation
• No wear-out mechanisms
• Helps designers meet worldwide telecom standards
• Helps reduce warranty and service costs
• Easy installation
• Helps improve power efficiency of equipment
Features:
• RoHS compliant
• Bidirectional crowbar transient voltage protection
• Broad voltage range 58V – 300V
with improved Vdrm/Vbo voltage range
• High off-state impedance
• Low on-state voltage
• High surge capability
• Short-circuit failure mode
• Surface-mount technology
• DO-214AA SMB package
• 10 x 1000 μs 50A surge rating
• Helps equipment comply with TIA-968,
Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45
Applications:
• Modems • Set top boxes
• Fax machines • POS systems
• Phones, answering machines • Analog and digital linecards (xDSL, T1/E1...)
• PBX systems • Other customer premise and central office network equipment requiring protection
Document: SCD 27284
SiBar Thyristor Surge Protectors Status: Released
© 2009 Tyco Electronics Corporation. All rights Reserved. 2 Rev: C Date: SEPTEMBER 29, 2009
SiBar Thyristor Surge Protectors
TVBxxxSA-L Series
Table SB2 – Surge Current Rating
TIA-968 Telcordia GR-1089* IEC61000-4-5 ITU K.20/21/45*
Type A Type B
Part Number Ipp(A)
5 x 320 µs Ipp(A)
10 x 560 µs
pp (A)
10 x 160 µs Ipp (A)
10 x 1000 µs
Ipp (A)
2 x 10 µs Ipp (A)
8 x 20 µs
IPP (A)
5 x 310 μs
(VOC: 10 x 700μs)
ITSM
Min.
(A)
di/dt
(A/µs)
dV/dt
(V/µs)
TVBxxxSA-L 90 70 100 50 150 150 90 22 500 2000
Notes: *Lightning current wave forms for applicable industry specification.
I
TSM, peak on-state surge current is measured at 60 Hz, one cycle.
di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF).
dV/dt: critical rate-of-rise of off-sta
g
e volta
g
e
(
linear wave form
,
V
D
= rated V
BO
,
T
j
= 25°C
Table SB1 - Electrical Characteristics
Part Number VDM Max. (V) VBO Max. (V) IH Min. (mA) VT Max. (V) C1 (Typ)
50VDC Bias
C2 (Typ)
2VDC Bias
Off-State
Current
VD2=VDM
(μA)
TVB058SA-L 58 77 150 4 43 80 5
TVB170SA-L 170 265 150 4 18 35 5
TVB180SA-L 180 219 150 4 30 (Max) 60 (Max) 5
TVB200SA-L 200 320 150 4 18 35 5
TVB270SA-L 270 365 150 4 15 32 5
TVB300SA-L 300 400 150 4 14 27 5
Notes: All electrical characteristics are measured at 25°C.
V
DM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µA.
V
BO measured at 100V/µs.
C1 measured at 1 MHz with a 50 VDC bias.
C2 measured at 1MHz with a 2VDC bias.
Document: SCD 27284
SiBar Thyristor Surge Protectors Status: Released
© 2009 Tyco Electronics Corporation. All rights Reserved. 3 Rev: C Date: SEPTEMBER 29, 2009
SiBar Thyristor Surge Protectors
TVBxxxSA-L Series
Table SB3 – Dimensions in Millimeters
A B C D
Dimension Min. Max. Min. Max. Min. Max. Min. Max.
4.06 4.57 3.30 3.94 1.90 2.41 1.95 2.20
TVBxxxSA-L (0.160) (0.180) (0.130) (0.155) (0.075) (0.095) (0.077) (0.087)
H J K P S
Dimension Min. Max. Min. Max. Min. Max. Ref Min Max.
0.051 0.200 0.150 0.31 0.76 1.27 0.51 5.21 5.59
TVBxxxSA-L (0.002) (0.008) (0.006) (0.012) (0.030) (0.050) (0.202) (0.205) (0.220)
Notes: *D dimension is measured within dimension P.
TVB series devices use industry standard SMB package type.
All devices are bidirectional and may be oriented in either direction for installation
Table SB5 – Reliability Tests
Test Conditions Duration
High temperature, reverse bias +100°C, 50VDC bias 1000 hours
High humidity, high temperature, reverse bias 85% RH, +85°C, 50VDC bias 1000 hours
High temperature storage life +150°C 1000 hours
Temperature cycling -65°C to +150°C, 15 minute dwell 1000 cycles
Autoclave 100% RH, +121°C, 15 PSI 96 hours
Table SB4 – Physical Characteristics and Environmental Specifications
Lead material Matte tin finish (-L devices)
Encapsulating material Epoxy, meets UL94V-0 requirements
Solderability per MIL-STD-750, Method 2026
Solder heat withstand per MIL-STD-750, Method 2031
Solvent resistance per MIL-STD-750, Method 1022
Mechanical shock per MIL-STD-750, Method 2016
Vibration per MIL-STD-750, Method 2056
Storage temperature (°C) -55 to 150
Operating temperature (°C) -40 to 125
Junction temperature (°C) 175
Maximum Lead Temperature for Soldering Purpose; for 10s (°C) 260
Document: SCD 27284
SiBar Thyristor Surge Protectors Status: Released
© 2009 Tyco Electronics Corporation. All rights Reserved. 4 Rev: C Date: SEPTEMBER 29, 2009
SiBar Thyristor Surge Protectors
TVBxxxSA-L Series
Document: SCD 27284
SiBar Thyristor Surge Protectors Status: Released
© 2009 Tyco Electronics Corporation. All rights Reserved. 5 Rev: C Date: SEPTEMBER 29, 2009
SiBar Thyristor Surge Protectors
TVBxxxSA-L Series
308 Constitution Drive, MS R21/2A Tel (800) 227-7040 www.circuitproection.com
Menlo Park, CA USA 94025-1164 (650) 361-6900 www.circuitprotection.com.hk (Chinese)
Fax (650) 361-2508 www.circuitprotection.jp (Japanese)
Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks.
All other trademarks and copyrights are property of their respective owners.
Table SB6 – Packaging and Marking Information
Recommended Pad Layout (millimeters/inchs)
Part
Description
Tape and
Reel
Quantity
Standard
Package
Part
Marking
Dimension
A (Nom.)
Dimension
B (Nom.)
Dimension
C (Nom.)
Agency
Recognition*
TVB058SA-L 2,500 10,000 058A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) --
TVB170SA-L 2,500 10,000 170A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB180SA-L 2,500 10,000 180A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB200SA-L 2,500 10,000 200A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB270SA-L 2,500 10,000 270A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
TVB300SA-L 2,500 10,000 300A 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL
* UL497B, File # E179610
